LatinIME/java/src/com/android/inputmethod/latin/makedict/BinaryDictInputOutput.java

1708 lines
74 KiB
Java
Raw Normal View History

/*
* Copyright (C) 2011 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may not
* use this file except in compliance with the License. You may obtain a copy of
* the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations under
* the License.
*/
package com.android.inputmethod.latin.makedict;
import com.android.inputmethod.latin.makedict.FormatSpec.FileHeader;
import com.android.inputmethod.latin.makedict.FormatSpec.FormatOptions;
import com.android.inputmethod.latin.makedict.FusionDictionary.CharGroup;
import com.android.inputmethod.latin.makedict.FusionDictionary.DictionaryOptions;
import com.android.inputmethod.latin.makedict.FusionDictionary.Node;
import com.android.inputmethod.latin.makedict.FusionDictionary.WeightedString;
import java.io.ByteArrayOutputStream;
import java.io.File;
import java.io.FileInputStream;
import java.io.FileNotFoundException;
import java.io.IOException;
import java.io.OutputStream;
import java.nio.ByteBuffer;
import java.nio.channels.FileChannel;
import java.util.ArrayList;
import java.util.Arrays;
import java.util.HashMap;
import java.util.Iterator;
import java.util.Map;
import java.util.TreeMap;
/**
* Reads and writes XML files for a FusionDictionary.
*
* All the methods in this class are static.
*/
public class BinaryDictInputOutput {
private static final boolean DBG = MakedictLog.DBG;
Fix a bug where a node size would be seen as increasing. The core reason for this is quite shrewd. When a word is a bigram of itself, the corresponding chargroup will have a bigram referring to itself. When computing bigram offsets, we use cached addresses of chargroups, but we compute the size of the node as we go. Hence, a discrepancy may happen between the base offset as seen by the bigram (which uses the recomputed value) and the target offset (which uses the cached value). When this happens, the cached node address is too large. The relative offset is negative, which is expected, since it points to this very charnode whose start is a few bytes earlier. But since the cached address is too large, the offset is computed as smaller than it should be. On the next pass, the cache has been refreshed with the newly computed size and the seen offset is now correct (or at least, much closer to correct). The correct value is larger than the previously computed offset, which was too small. If it happens that it crosses the -255 or -65335 boundary, the address will be seen as needing 1 more byte than previously computed. If this is the only change in size of this node, the node will be seen as having a larger size than previously, which is unexpected. Debug code was catching this and crashing the program. So this case is very rare, but in an even rarer occurence, it may happen that in the same node, another chargroup happens to decrease it size by the same amount. In this case, the node may be seen as having not been modified. This is probably extremely rare. If on top of this, it happens that no other node has been modified, then the file may be seen as complete, and the discrepancy left as is in the file, leading to a broken file. The probability that this happens is abyssally low, but the bug exists, and the current debug code would not have caught this. To further catch similar bugs, this change also modifies the test that decides if the node has changed. On grounds that all components of a node may only decrease in size with each successive pass, it's theoritically safe to assume that the same size means the node contents have not changed, but in case of a bug like the bug above where a component wrongly grows while another shrinks and both cancel each other out, the new code will catch this. Also, this change adds a check against the number of passses, to avoid infinite loops in case of a bug in the computation code. This change fixes this bug by updating the cached address of each chargroup as we go. This eliminates the discrepancy and fixes the bug. Bug: 6383103 Change-Id: Ia3f450e22c87c4c193cea8ddb157aebd5f224f01
2012-04-24 03:13:22 +00:00
// Arbitrary limit to how much passes we consider address size compression should
// terminate in. At the time of this writing, our largest dictionary completes
// compression in five passes.
// If the number of passes exceeds this number, makedict bails with an exception on
// suspicion that a bug might be causing an infinite loop.
private static final int MAX_PASSES = 24;
private static final int MAX_JUMPS = 12;
Fix a bug where a node size would be seen as increasing. The core reason for this is quite shrewd. When a word is a bigram of itself, the corresponding chargroup will have a bigram referring to itself. When computing bigram offsets, we use cached addresses of chargroups, but we compute the size of the node as we go. Hence, a discrepancy may happen between the base offset as seen by the bigram (which uses the recomputed value) and the target offset (which uses the cached value). When this happens, the cached node address is too large. The relative offset is negative, which is expected, since it points to this very charnode whose start is a few bytes earlier. But since the cached address is too large, the offset is computed as smaller than it should be. On the next pass, the cache has been refreshed with the newly computed size and the seen offset is now correct (or at least, much closer to correct). The correct value is larger than the previously computed offset, which was too small. If it happens that it crosses the -255 or -65335 boundary, the address will be seen as needing 1 more byte than previously computed. If this is the only change in size of this node, the node will be seen as having a larger size than previously, which is unexpected. Debug code was catching this and crashing the program. So this case is very rare, but in an even rarer occurence, it may happen that in the same node, another chargroup happens to decrease it size by the same amount. In this case, the node may be seen as having not been modified. This is probably extremely rare. If on top of this, it happens that no other node has been modified, then the file may be seen as complete, and the discrepancy left as is in the file, leading to a broken file. The probability that this happens is abyssally low, but the bug exists, and the current debug code would not have caught this. To further catch similar bugs, this change also modifies the test that decides if the node has changed. On grounds that all components of a node may only decrease in size with each successive pass, it's theoritically safe to assume that the same size means the node contents have not changed, but in case of a bug like the bug above where a component wrongly grows while another shrinks and both cancel each other out, the new code will catch this. Also, this change adds a check against the number of passses, to avoid infinite loops in case of a bug in the computation code. This change fixes this bug by updating the cached address of each chargroup as we go. This eliminates the discrepancy and fixes the bug. Bug: 6383103 Change-Id: Ia3f450e22c87c4c193cea8ddb157aebd5f224f01
2012-04-24 03:13:22 +00:00
public interface FusionDictionaryBufferInterface {
public int readUnsignedByte();
public int readUnsignedShort();
public int readUnsignedInt24();
public int readInt();
public int position();
public void position(int newPosition);
public void put(final byte b);
public int limit();
public int capacity();
}
public static final class ByteBufferWrapper implements FusionDictionaryBufferInterface {
private ByteBuffer mBuffer;
public ByteBufferWrapper(final ByteBuffer buffer) {
mBuffer = buffer;
}
@Override
public int readUnsignedByte() {
return ((int)mBuffer.get()) & 0xFF;
}
@Override
public int readUnsignedShort() {
return ((int)mBuffer.getShort()) & 0xFFFF;
}
@Override
public int readUnsignedInt24() {
final int retval = readUnsignedByte();
return (retval << 16) + readUnsignedShort();
}
@Override
public int readInt() {
return mBuffer.getInt();
}
@Override
public int position() {
return mBuffer.position();
}
@Override
public void position(int newPos) {
mBuffer.position(newPos);
}
@Override
public void put(final byte b) {
mBuffer.put(b);
}
@Override
public int limit() {
return mBuffer.limit();
}
@Override
public int capacity() {
return mBuffer.capacity();
}
}
/**
* A class grouping utility function for our specific character encoding.
*/
private static class CharEncoding {
private static final int MINIMAL_ONE_BYTE_CHARACTER_VALUE = 0x20;
private static final int MAXIMAL_ONE_BYTE_CHARACTER_VALUE = 0xFF;
/**
* Helper method to find out whether this code fits on one byte
*/
private static boolean fitsOnOneByte(final int character) {
return character >= MINIMAL_ONE_BYTE_CHARACTER_VALUE
&& character <= MAXIMAL_ONE_BYTE_CHARACTER_VALUE;
}
/**
* Compute the size of a character given its character code.
*
* Char format is:
* 1 byte = bbbbbbbb match
* case 000xxxxx: xxxxx << 16 + next byte << 8 + next byte
* else: if 00011111 (= 0x1F) : this is the terminator. This is a relevant choice because
* unicode code points range from 0 to 0x10FFFF, so any 3-byte value starting with
* 00011111 would be outside unicode.
* else: iso-latin-1 code
* This allows for the whole unicode range to be encoded, including chars outside of
* the BMP. Also everything in the iso-latin-1 charset is only 1 byte, except control
* characters which should never happen anyway (and still work, but take 3 bytes).
*
* @param character the character code.
* @return the size in binary encoded-form, either 1 or 3 bytes.
*/
private static int getCharSize(final int character) {
// See char encoding in FusionDictionary.java
if (fitsOnOneByte(character)) return 1;
if (FormatSpec.INVALID_CHARACTER == character) return 1;
return 3;
}
/**
* Compute the byte size of a character array.
*/
private static int getCharArraySize(final int[] chars) {
int size = 0;
for (int character : chars) size += getCharSize(character);
return size;
}
/**
* Writes a char array to a byte buffer.
*
* @param codePoints the code point array to write.
* @param buffer the byte buffer to write to.
* @param index the index in buffer to write the character array to.
* @return the index after the last character.
*/
private static int writeCharArray(final int[] codePoints, final byte[] buffer, int index) {
for (int codePoint : codePoints) {
if (1 == getCharSize(codePoint)) {
buffer[index++] = (byte)codePoint;
} else {
buffer[index++] = (byte)(0xFF & (codePoint >> 16));
buffer[index++] = (byte)(0xFF & (codePoint >> 8));
buffer[index++] = (byte)(0xFF & codePoint);
}
}
return index;
}
/**
* Writes a string with our character format to a byte buffer.
*
* This will also write the terminator byte.
*
* @param buffer the byte buffer to write to.
* @param origin the offset to write from.
* @param word the string to write.
* @return the size written, in bytes.
*/
private static int writeString(final byte[] buffer, final int origin,
final String word) {
final int length = word.length();
int index = origin;
for (int i = 0; i < length; i = word.offsetByCodePoints(i, 1)) {
final int codePoint = word.codePointAt(i);
if (1 == getCharSize(codePoint)) {
buffer[index++] = (byte)codePoint;
} else {
buffer[index++] = (byte)(0xFF & (codePoint >> 16));
buffer[index++] = (byte)(0xFF & (codePoint >> 8));
buffer[index++] = (byte)(0xFF & codePoint);
}
}
buffer[index++] = FormatSpec.GROUP_CHARACTERS_TERMINATOR;
return index - origin;
}
/**
* Writes a string with our character format to a ByteArrayOutputStream.
*
* This will also write the terminator byte.
*
* @param buffer the ByteArrayOutputStream to write to.
* @param word the string to write.
*/
private static void writeString(final ByteArrayOutputStream buffer, final String word) {
final int length = word.length();
for (int i = 0; i < length; i = word.offsetByCodePoints(i, 1)) {
final int codePoint = word.codePointAt(i);
if (1 == getCharSize(codePoint)) {
buffer.write((byte) codePoint);
} else {
buffer.write((byte) (0xFF & (codePoint >> 16)));
buffer.write((byte) (0xFF & (codePoint >> 8)));
buffer.write((byte) (0xFF & codePoint));
}
}
buffer.write(FormatSpec.GROUP_CHARACTERS_TERMINATOR);
}
/**
* Reads a string from a buffer. This is the converse of the above method.
*/
private static String readString(final FusionDictionaryBufferInterface buffer) {
final StringBuilder s = new StringBuilder();
int character = readChar(buffer);
while (character != FormatSpec.INVALID_CHARACTER) {
s.appendCodePoint(character);
character = readChar(buffer);
}
return s.toString();
}
/**
* Reads a character from the buffer.
*
* This follows the character format documented earlier in this source file.
*
* @param buffer the buffer, positioned over an encoded character.
* @return the character code.
*/
private static int readChar(final FusionDictionaryBufferInterface buffer) {
int character = buffer.readUnsignedByte();
if (!fitsOnOneByte(character)) {
if (FormatSpec.GROUP_CHARACTERS_TERMINATOR == character) {
return FormatSpec.INVALID_CHARACTER;
}
character <<= 16;
character += buffer.readUnsignedShort();
}
return character;
}
}
/**
* Compute the binary size of the character array in a group
*
* If only one character, this is the size of this character. If many, it's the sum of their
* sizes + 1 byte for the terminator.
*
* @param group the group
* @return the size of the char array, including the terminator if any
*/
private static int getGroupCharactersSize(final CharGroup group) {
int size = CharEncoding.getCharArraySize(group.mChars);
if (group.hasSeveralChars()) size += FormatSpec.GROUP_TERMINATOR_SIZE;
return size;
}
/**
* Compute the binary size of the group count
* @param count the group count
* @return the size of the group count, either 1 or 2 bytes.
*/
public static int getGroupCountSize(final int count) {
if (FormatSpec.MAX_CHARGROUPS_FOR_ONE_BYTE_CHARGROUP_COUNT >= count) {
return 1;
} else if (FormatSpec.MAX_CHARGROUPS_IN_A_NODE >= count) {
return 2;
} else {
throw new RuntimeException("Can't have more than "
+ FormatSpec.MAX_CHARGROUPS_IN_A_NODE + " groups in a node (found " + count
+ ")");
}
}
/**
* Compute the binary size of the group count for a node
* @param node the node
* @return the size of the group count, either 1 or 2 bytes.
*/
private static int getGroupCountSize(final Node node) {
return getGroupCountSize(node.mData.size());
}
/**
* Compute the size of a shortcut in bytes.
*/
private static int getShortcutSize(final WeightedString shortcut) {
int size = FormatSpec.GROUP_ATTRIBUTE_FLAGS_SIZE;
final String word = shortcut.mWord;
final int length = word.length();
for (int i = 0; i < length; i = word.offsetByCodePoints(i, 1)) {
final int codePoint = word.codePointAt(i);
size += CharEncoding.getCharSize(codePoint);
}
size += FormatSpec.GROUP_TERMINATOR_SIZE;
return size;
}
/**
* Compute the size of a shortcut list in bytes.
*
* This is known in advance and does not change according to position in the file
* like address lists do.
*/
private static int getShortcutListSize(final ArrayList<WeightedString> shortcutList) {
if (null == shortcutList) return 0;
int size = FormatSpec.GROUP_SHORTCUT_LIST_SIZE_SIZE;
for (final WeightedString shortcut : shortcutList) {
size += getShortcutSize(shortcut);
}
return size;
}
/**
* Compute the maximum size of a CharGroup, assuming 3-byte addresses for everything.
*
* @param group the CharGroup to compute the size of.
* @param options file format options.
* @return the maximum size of the group.
*/
private static int getCharGroupMaximumSize(final CharGroup group, final FormatOptions options) {
int size = getGroupHeaderSize(group, options);
// If terminal, one byte for the frequency
if (group.isTerminal()) size += FormatSpec.GROUP_FREQUENCY_SIZE;
size += FormatSpec.GROUP_MAX_ADDRESS_SIZE; // For children address
size += getShortcutListSize(group.mShortcutTargets);
if (null != group.mBigrams) {
size += (FormatSpec.GROUP_ATTRIBUTE_FLAGS_SIZE
+ FormatSpec.GROUP_ATTRIBUTE_MAX_ADDRESS_SIZE)
* group.mBigrams.size();
}
return size;
}
/**
* Compute the maximum size of a node, assuming 3-byte addresses for everything, and caches
* it in the 'actualSize' member of the node.
*
* @param node the node to compute the maximum size of.
* @param options file format options.
*/
private static void setNodeMaximumSize(final Node node, final FormatOptions options) {
int size = getGroupCountSize(node);
for (CharGroup g : node.mData) {
final int groupSize = getCharGroupMaximumSize(g, options);
g.mCachedSize = groupSize;
size += groupSize;
}
if (options.mSupportsDynamicUpdate) {
size += FormatSpec.FORWARD_LINK_ADDRESS_SIZE;
}
node.mCachedSize = size;
}
/**
* Helper method to hide the actual value of the no children address.
*/
public static boolean hasChildrenAddress(final int address) {
return FormatSpec.NO_CHILDREN_ADDRESS != address;
}
/**
* Helper method to check whether the group is moved.
*/
public static boolean isMovedGroup(final int flags, final FormatOptions options) {
return options.mSupportsDynamicUpdate && ((flags & FormatSpec.FLAG_IS_MOVED) == 1);
}
/**
* Helper method to check whether the dictionary can be updated dynamically.
*/
public static boolean supportsDynamicUpdate(final FormatOptions options) {
return options.mVersion >= FormatSpec.FIRST_VERSION_WITH_DYNAMIC_UPDATE
&& options.mSupportsDynamicUpdate;
}
/**
* Compute the size of the header (flag + [parent address] + characters size) of a CharGroup.
*
* @param group the group of which to compute the size of the header
* @param options file format options.
*/
private static int getGroupHeaderSize(final CharGroup group, final FormatOptions options) {
if (supportsDynamicUpdate(options)) {
return FormatSpec.GROUP_FLAGS_SIZE + FormatSpec.PARENT_ADDRESS_SIZE
+ getGroupCharactersSize(group);
} else {
return FormatSpec.GROUP_FLAGS_SIZE + getGroupCharactersSize(group);
}
}
private static final int UINT8_MAX = 0xFF;
private static final int UINT16_MAX = 0xFFFF;
private static final int UINT24_MAX = 0xFFFFFF;
/**
* Compute the size, in bytes, that an address will occupy.
*
* This can be used either for children addresses (which are always positive) or for
* attribute, which may be positive or negative but
* store their sign bit separately.
*
* @param address the address
* @return the byte size.
*/
private static int getByteSize(final int address) {
assert(address <= UINT24_MAX);
if (!hasChildrenAddress(address)) {
return 0;
} else if (Math.abs(address) <= UINT8_MAX) {
return 1;
} else if (Math.abs(address) <= UINT16_MAX) {
return 2;
} else {
return 3;
}
}
private static final int SINT8_MAX = 0x7F;
private static final int SINT16_MAX = 0x7FFF;
private static final int SINT24_MAX = 0x7FFFFF;
private static final int MSB8 = 0x80;
private static final int MSB16 = 0x8000;
private static final int MSB24 = 0x800000;
// End utility methods.
// This method is responsible for finding a nice ordering of the nodes that favors run-time
// cache performance and dictionary size.
/* package for tests */ static ArrayList<Node> flattenTree(final Node root) {
final int treeSize = FusionDictionary.countCharGroups(root);
MakedictLog.i("Counted nodes : " + treeSize);
final ArrayList<Node> flatTree = new ArrayList<Node>(treeSize);
return flattenTreeInner(flatTree, root);
}
private static ArrayList<Node> flattenTreeInner(final ArrayList<Node> list, final Node node) {
// Removing the node is necessary if the tails are merged, because we would then
// add the same node several times when we only want it once. A number of places in
// the code also depends on any node being only once in the list.
// Merging tails can only be done if there are no attributes. Searching for attributes
// in LatinIME code depends on a total breadth-first ordering, which merging tails
// breaks. If there are no attributes, it should be fine (and reduce the file size)
// to merge tails, and removing the node from the list would be necessary. However,
// we don't merge tails because breaking the breadth-first ordering would result in
// extreme overhead at bigram lookup time (it would make the search function O(n) instead
// of the current O(log(n)), where n=number of nodes in the dictionary which is pretty
// high).
// If no nodes are ever merged, we can't have the same node twice in the list, hence
// searching for duplicates in unnecessary. It is also very performance consuming,
// since `list' is an ArrayList so it's an O(n) operation that runs on all nodes, making
// this simple list.remove operation O(n*n) overall. On Android this overhead is very
// high.
// For future reference, the code to remove duplicate is a simple : list.remove(node);
list.add(node);
final ArrayList<CharGroup> branches = node.mData;
final int nodeSize = branches.size();
for (CharGroup group : branches) {
if (null != group.mChildren) flattenTreeInner(list, group.mChildren);
}
return list;
}
/**
* Finds the absolute address of a word in the dictionary.
*
* @param dict the dictionary in which to search.
* @param word the word we are searching for.
* @return the word address. If it is not found, an exception is thrown.
*/
private static int findAddressOfWord(final FusionDictionary dict, final String word) {
return FusionDictionary.findWordInTree(dict.mRoot, word).mCachedAddress;
}
/**
* Computes the actual node size, based on the cached addresses of the children nodes.
*
* Each node stores its tentative address. During dictionary address computing, these
* are not final, but they can be used to compute the node size (the node size depends
* on the address of the children because the number of bytes necessary to store an
Fix a bug where a node size would be seen as increasing. The core reason for this is quite shrewd. When a word is a bigram of itself, the corresponding chargroup will have a bigram referring to itself. When computing bigram offsets, we use cached addresses of chargroups, but we compute the size of the node as we go. Hence, a discrepancy may happen between the base offset as seen by the bigram (which uses the recomputed value) and the target offset (which uses the cached value). When this happens, the cached node address is too large. The relative offset is negative, which is expected, since it points to this very charnode whose start is a few bytes earlier. But since the cached address is too large, the offset is computed as smaller than it should be. On the next pass, the cache has been refreshed with the newly computed size and the seen offset is now correct (or at least, much closer to correct). The correct value is larger than the previously computed offset, which was too small. If it happens that it crosses the -255 or -65335 boundary, the address will be seen as needing 1 more byte than previously computed. If this is the only change in size of this node, the node will be seen as having a larger size than previously, which is unexpected. Debug code was catching this and crashing the program. So this case is very rare, but in an even rarer occurence, it may happen that in the same node, another chargroup happens to decrease it size by the same amount. In this case, the node may be seen as having not been modified. This is probably extremely rare. If on top of this, it happens that no other node has been modified, then the file may be seen as complete, and the discrepancy left as is in the file, leading to a broken file. The probability that this happens is abyssally low, but the bug exists, and the current debug code would not have caught this. To further catch similar bugs, this change also modifies the test that decides if the node has changed. On grounds that all components of a node may only decrease in size with each successive pass, it's theoritically safe to assume that the same size means the node contents have not changed, but in case of a bug like the bug above where a component wrongly grows while another shrinks and both cancel each other out, the new code will catch this. Also, this change adds a check against the number of passses, to avoid infinite loops in case of a bug in the computation code. This change fixes this bug by updating the cached address of each chargroup as we go. This eliminates the discrepancy and fixes the bug. Bug: 6383103 Change-Id: Ia3f450e22c87c4c193cea8ddb157aebd5f224f01
2012-04-24 03:13:22 +00:00
* address depends on its numeric value. The return value indicates whether the node
* contents (as in, any of the addresses stored in the cache fields) have changed with
* respect to their previous value.
*
* @param node the node to compute the size of.
* @param dict the dictionary in which the word/attributes are to be found.
* @param formatOptions file format options.
Fix a bug where a node size would be seen as increasing. The core reason for this is quite shrewd. When a word is a bigram of itself, the corresponding chargroup will have a bigram referring to itself. When computing bigram offsets, we use cached addresses of chargroups, but we compute the size of the node as we go. Hence, a discrepancy may happen between the base offset as seen by the bigram (which uses the recomputed value) and the target offset (which uses the cached value). When this happens, the cached node address is too large. The relative offset is negative, which is expected, since it points to this very charnode whose start is a few bytes earlier. But since the cached address is too large, the offset is computed as smaller than it should be. On the next pass, the cache has been refreshed with the newly computed size and the seen offset is now correct (or at least, much closer to correct). The correct value is larger than the previously computed offset, which was too small. If it happens that it crosses the -255 or -65335 boundary, the address will be seen as needing 1 more byte than previously computed. If this is the only change in size of this node, the node will be seen as having a larger size than previously, which is unexpected. Debug code was catching this and crashing the program. So this case is very rare, but in an even rarer occurence, it may happen that in the same node, another chargroup happens to decrease it size by the same amount. In this case, the node may be seen as having not been modified. This is probably extremely rare. If on top of this, it happens that no other node has been modified, then the file may be seen as complete, and the discrepancy left as is in the file, leading to a broken file. The probability that this happens is abyssally low, but the bug exists, and the current debug code would not have caught this. To further catch similar bugs, this change also modifies the test that decides if the node has changed. On grounds that all components of a node may only decrease in size with each successive pass, it's theoritically safe to assume that the same size means the node contents have not changed, but in case of a bug like the bug above where a component wrongly grows while another shrinks and both cancel each other out, the new code will catch this. Also, this change adds a check against the number of passses, to avoid infinite loops in case of a bug in the computation code. This change fixes this bug by updating the cached address of each chargroup as we go. This eliminates the discrepancy and fixes the bug. Bug: 6383103 Change-Id: Ia3f450e22c87c4c193cea8ddb157aebd5f224f01
2012-04-24 03:13:22 +00:00
* @return false if none of the cached addresses inside the node changed, true otherwise.
*/
private static boolean computeActualNodeSize(final Node node, final FusionDictionary dict,
final FormatOptions formatOptions) {
Fix a bug where a node size would be seen as increasing. The core reason for this is quite shrewd. When a word is a bigram of itself, the corresponding chargroup will have a bigram referring to itself. When computing bigram offsets, we use cached addresses of chargroups, but we compute the size of the node as we go. Hence, a discrepancy may happen between the base offset as seen by the bigram (which uses the recomputed value) and the target offset (which uses the cached value). When this happens, the cached node address is too large. The relative offset is negative, which is expected, since it points to this very charnode whose start is a few bytes earlier. But since the cached address is too large, the offset is computed as smaller than it should be. On the next pass, the cache has been refreshed with the newly computed size and the seen offset is now correct (or at least, much closer to correct). The correct value is larger than the previously computed offset, which was too small. If it happens that it crosses the -255 or -65335 boundary, the address will be seen as needing 1 more byte than previously computed. If this is the only change in size of this node, the node will be seen as having a larger size than previously, which is unexpected. Debug code was catching this and crashing the program. So this case is very rare, but in an even rarer occurence, it may happen that in the same node, another chargroup happens to decrease it size by the same amount. In this case, the node may be seen as having not been modified. This is probably extremely rare. If on top of this, it happens that no other node has been modified, then the file may be seen as complete, and the discrepancy left as is in the file, leading to a broken file. The probability that this happens is abyssally low, but the bug exists, and the current debug code would not have caught this. To further catch similar bugs, this change also modifies the test that decides if the node has changed. On grounds that all components of a node may only decrease in size with each successive pass, it's theoritically safe to assume that the same size means the node contents have not changed, but in case of a bug like the bug above where a component wrongly grows while another shrinks and both cancel each other out, the new code will catch this. Also, this change adds a check against the number of passses, to avoid infinite loops in case of a bug in the computation code. This change fixes this bug by updating the cached address of each chargroup as we go. This eliminates the discrepancy and fixes the bug. Bug: 6383103 Change-Id: Ia3f450e22c87c4c193cea8ddb157aebd5f224f01
2012-04-24 03:13:22 +00:00
boolean changed = false;
int size = getGroupCountSize(node);
for (CharGroup group : node.mData) {
Fix a bug where a node size would be seen as increasing. The core reason for this is quite shrewd. When a word is a bigram of itself, the corresponding chargroup will have a bigram referring to itself. When computing bigram offsets, we use cached addresses of chargroups, but we compute the size of the node as we go. Hence, a discrepancy may happen between the base offset as seen by the bigram (which uses the recomputed value) and the target offset (which uses the cached value). When this happens, the cached node address is too large. The relative offset is negative, which is expected, since it points to this very charnode whose start is a few bytes earlier. But since the cached address is too large, the offset is computed as smaller than it should be. On the next pass, the cache has been refreshed with the newly computed size and the seen offset is now correct (or at least, much closer to correct). The correct value is larger than the previously computed offset, which was too small. If it happens that it crosses the -255 or -65335 boundary, the address will be seen as needing 1 more byte than previously computed. If this is the only change in size of this node, the node will be seen as having a larger size than previously, which is unexpected. Debug code was catching this and crashing the program. So this case is very rare, but in an even rarer occurence, it may happen that in the same node, another chargroup happens to decrease it size by the same amount. In this case, the node may be seen as having not been modified. This is probably extremely rare. If on top of this, it happens that no other node has been modified, then the file may be seen as complete, and the discrepancy left as is in the file, leading to a broken file. The probability that this happens is abyssally low, but the bug exists, and the current debug code would not have caught this. To further catch similar bugs, this change also modifies the test that decides if the node has changed. On grounds that all components of a node may only decrease in size with each successive pass, it's theoritically safe to assume that the same size means the node contents have not changed, but in case of a bug like the bug above where a component wrongly grows while another shrinks and both cancel each other out, the new code will catch this. Also, this change adds a check against the number of passses, to avoid infinite loops in case of a bug in the computation code. This change fixes this bug by updating the cached address of each chargroup as we go. This eliminates the discrepancy and fixes the bug. Bug: 6383103 Change-Id: Ia3f450e22c87c4c193cea8ddb157aebd5f224f01
2012-04-24 03:13:22 +00:00
if (group.mCachedAddress != node.mCachedAddress + size) {
changed = true;
group.mCachedAddress = node.mCachedAddress + size;
}
int groupSize = getGroupHeaderSize(group, formatOptions);
if (group.isTerminal()) groupSize += FormatSpec.GROUP_FREQUENCY_SIZE;
if (null == group.mChildren && formatOptions.mSupportsDynamicUpdate) {
groupSize += FormatSpec.SIGNED_CHILDREN_ADDRESS_SIZE;
} else if (null != group.mChildren) {
final int offsetBasePoint = groupSize + node.mCachedAddress + size;
final int offset = group.mChildren.mCachedAddress - offsetBasePoint;
// assign my address to children's parent address
group.mChildren.mCachedParentAddress = group.mCachedAddress
- group.mChildren.mCachedAddress;
if (formatOptions.mSupportsDynamicUpdate) {
groupSize += FormatSpec.SIGNED_CHILDREN_ADDRESS_SIZE;
} else {
groupSize += getByteSize(offset);
}
}
groupSize += getShortcutListSize(group.mShortcutTargets);
if (null != group.mBigrams) {
for (WeightedString bigram : group.mBigrams) {
final int offsetBasePoint = groupSize + node.mCachedAddress + size
+ FormatSpec.GROUP_FLAGS_SIZE;
final int addressOfBigram = findAddressOfWord(dict, bigram.mWord);
final int offset = addressOfBigram - offsetBasePoint;
groupSize += getByteSize(offset) + FormatSpec.GROUP_FLAGS_SIZE;
}
}
group.mCachedSize = groupSize;
size += groupSize;
}
if (formatOptions.mSupportsDynamicUpdate) {
size += FormatSpec.FORWARD_LINK_ADDRESS_SIZE;
}
Fix a bug where a node size would be seen as increasing. The core reason for this is quite shrewd. When a word is a bigram of itself, the corresponding chargroup will have a bigram referring to itself. When computing bigram offsets, we use cached addresses of chargroups, but we compute the size of the node as we go. Hence, a discrepancy may happen between the base offset as seen by the bigram (which uses the recomputed value) and the target offset (which uses the cached value). When this happens, the cached node address is too large. The relative offset is negative, which is expected, since it points to this very charnode whose start is a few bytes earlier. But since the cached address is too large, the offset is computed as smaller than it should be. On the next pass, the cache has been refreshed with the newly computed size and the seen offset is now correct (or at least, much closer to correct). The correct value is larger than the previously computed offset, which was too small. If it happens that it crosses the -255 or -65335 boundary, the address will be seen as needing 1 more byte than previously computed. If this is the only change in size of this node, the node will be seen as having a larger size than previously, which is unexpected. Debug code was catching this and crashing the program. So this case is very rare, but in an even rarer occurence, it may happen that in the same node, another chargroup happens to decrease it size by the same amount. In this case, the node may be seen as having not been modified. This is probably extremely rare. If on top of this, it happens that no other node has been modified, then the file may be seen as complete, and the discrepancy left as is in the file, leading to a broken file. The probability that this happens is abyssally low, but the bug exists, and the current debug code would not have caught this. To further catch similar bugs, this change also modifies the test that decides if the node has changed. On grounds that all components of a node may only decrease in size with each successive pass, it's theoritically safe to assume that the same size means the node contents have not changed, but in case of a bug like the bug above where a component wrongly grows while another shrinks and both cancel each other out, the new code will catch this. Also, this change adds a check against the number of passses, to avoid infinite loops in case of a bug in the computation code. This change fixes this bug by updating the cached address of each chargroup as we go. This eliminates the discrepancy and fixes the bug. Bug: 6383103 Change-Id: Ia3f450e22c87c4c193cea8ddb157aebd5f224f01
2012-04-24 03:13:22 +00:00
if (node.mCachedSize != size) {
node.mCachedSize = size;
changed = true;
}
return changed;
}
/**
* Computes the byte size of a list of nodes and updates each node cached position.
*
* @param flatNodes the array of nodes.
* @param formatOptions file format options.
* @return the byte size of the entire stack.
*/
private static int stackNodes(final ArrayList<Node> flatNodes,
final FormatOptions formatOptions) {
int nodeOffset = 0;
for (Node n : flatNodes) {
n.mCachedAddress = nodeOffset;
int groupCountSize = getGroupCountSize(n);
int groupOffset = 0;
for (CharGroup g : n.mData) {
g.mCachedAddress = groupCountSize + nodeOffset + groupOffset;
groupOffset += g.mCachedSize;
}
final int nodeSize = groupCountSize + groupOffset
+ (formatOptions.mSupportsDynamicUpdate
? FormatSpec.FORWARD_LINK_ADDRESS_SIZE : 0);
if (nodeSize != n.mCachedSize) {
throw new RuntimeException("Bug : Stored and computed node size differ");
}
nodeOffset += n.mCachedSize;
}
return nodeOffset;
}
/**
* Compute the addresses and sizes of an ordered node array.
*
* This method takes a node array and will update its cached address and size values
* so that they can be written into a file. It determines the smallest size each of the
* nodes can be given the addresses of its children and attributes, and store that into
* each node.
* The order of the node is given by the order of the array. This method makes no effort
* to find a good order; it only mechanically computes the size this order results in.
*
* @param dict the dictionary
* @param flatNodes the ordered array of nodes
* @param formatOptions file format options.
* @return the same array it was passed. The nodes have been updated for address and size.
*/
private static ArrayList<Node> computeAddresses(final FusionDictionary dict,
final ArrayList<Node> flatNodes, final FormatOptions formatOptions) {
// First get the worst sizes and offsets
for (Node n : flatNodes) setNodeMaximumSize(n, formatOptions);
final int offset = stackNodes(flatNodes, formatOptions);
MakedictLog.i("Compressing the array addresses. Original size : " + offset);
MakedictLog.i("(Recursively seen size : " + offset + ")");
int passes = 0;
boolean changesDone = false;
do {
changesDone = false;
for (Node n : flatNodes) {
final int oldNodeSize = n.mCachedSize;
final boolean changed = computeActualNodeSize(n, dict, formatOptions);
final int newNodeSize = n.mCachedSize;
if (oldNodeSize < newNodeSize) throw new RuntimeException("Increased size ?!");
Fix a bug where a node size would be seen as increasing. The core reason for this is quite shrewd. When a word is a bigram of itself, the corresponding chargroup will have a bigram referring to itself. When computing bigram offsets, we use cached addresses of chargroups, but we compute the size of the node as we go. Hence, a discrepancy may happen between the base offset as seen by the bigram (which uses the recomputed value) and the target offset (which uses the cached value). When this happens, the cached node address is too large. The relative offset is negative, which is expected, since it points to this very charnode whose start is a few bytes earlier. But since the cached address is too large, the offset is computed as smaller than it should be. On the next pass, the cache has been refreshed with the newly computed size and the seen offset is now correct (or at least, much closer to correct). The correct value is larger than the previously computed offset, which was too small. If it happens that it crosses the -255 or -65335 boundary, the address will be seen as needing 1 more byte than previously computed. If this is the only change in size of this node, the node will be seen as having a larger size than previously, which is unexpected. Debug code was catching this and crashing the program. So this case is very rare, but in an even rarer occurence, it may happen that in the same node, another chargroup happens to decrease it size by the same amount. In this case, the node may be seen as having not been modified. This is probably extremely rare. If on top of this, it happens that no other node has been modified, then the file may be seen as complete, and the discrepancy left as is in the file, leading to a broken file. The probability that this happens is abyssally low, but the bug exists, and the current debug code would not have caught this. To further catch similar bugs, this change also modifies the test that decides if the node has changed. On grounds that all components of a node may only decrease in size with each successive pass, it's theoritically safe to assume that the same size means the node contents have not changed, but in case of a bug like the bug above where a component wrongly grows while another shrinks and both cancel each other out, the new code will catch this. Also, this change adds a check against the number of passses, to avoid infinite loops in case of a bug in the computation code. This change fixes this bug by updating the cached address of each chargroup as we go. This eliminates the discrepancy and fixes the bug. Bug: 6383103 Change-Id: Ia3f450e22c87c4c193cea8ddb157aebd5f224f01
2012-04-24 03:13:22 +00:00
changesDone |= changed;
}
stackNodes(flatNodes, formatOptions);
++passes;
Fix a bug where a node size would be seen as increasing. The core reason for this is quite shrewd. When a word is a bigram of itself, the corresponding chargroup will have a bigram referring to itself. When computing bigram offsets, we use cached addresses of chargroups, but we compute the size of the node as we go. Hence, a discrepancy may happen between the base offset as seen by the bigram (which uses the recomputed value) and the target offset (which uses the cached value). When this happens, the cached node address is too large. The relative offset is negative, which is expected, since it points to this very charnode whose start is a few bytes earlier. But since the cached address is too large, the offset is computed as smaller than it should be. On the next pass, the cache has been refreshed with the newly computed size and the seen offset is now correct (or at least, much closer to correct). The correct value is larger than the previously computed offset, which was too small. If it happens that it crosses the -255 or -65335 boundary, the address will be seen as needing 1 more byte than previously computed. If this is the only change in size of this node, the node will be seen as having a larger size than previously, which is unexpected. Debug code was catching this and crashing the program. So this case is very rare, but in an even rarer occurence, it may happen that in the same node, another chargroup happens to decrease it size by the same amount. In this case, the node may be seen as having not been modified. This is probably extremely rare. If on top of this, it happens that no other node has been modified, then the file may be seen as complete, and the discrepancy left as is in the file, leading to a broken file. The probability that this happens is abyssally low, but the bug exists, and the current debug code would not have caught this. To further catch similar bugs, this change also modifies the test that decides if the node has changed. On grounds that all components of a node may only decrease in size with each successive pass, it's theoritically safe to assume that the same size means the node contents have not changed, but in case of a bug like the bug above where a component wrongly grows while another shrinks and both cancel each other out, the new code will catch this. Also, this change adds a check against the number of passses, to avoid infinite loops in case of a bug in the computation code. This change fixes this bug by updating the cached address of each chargroup as we go. This eliminates the discrepancy and fixes the bug. Bug: 6383103 Change-Id: Ia3f450e22c87c4c193cea8ddb157aebd5f224f01
2012-04-24 03:13:22 +00:00
if (passes > MAX_PASSES) throw new RuntimeException("Too many passes - probably a bug");
} while (changesDone);
final Node lastNode = flatNodes.get(flatNodes.size() - 1);
MakedictLog.i("Compression complete in " + passes + " passes.");
MakedictLog.i("After address compression : "
+ (lastNode.mCachedAddress + lastNode.mCachedSize));
return flatNodes;
}
/**
* Sanity-checking method.
*
* This method checks an array of node for juxtaposition, that is, it will do
* nothing if each node's cached address is actually the previous node's address
* plus the previous node's size.
* If this is not the case, it will throw an exception.
*
* @param array the array node to check
*/
private static void checkFlatNodeArray(final ArrayList<Node> array) {
int offset = 0;
int index = 0;
for (Node n : array) {
if (n.mCachedAddress != offset) {
throw new RuntimeException("Wrong address for node " + index
+ " : expected " + offset + ", got " + n.mCachedAddress);
}
++index;
offset += n.mCachedSize;
}
}
/**
* Helper method to write a variable-size address to a file.
*
* @param buffer the buffer to write to.
* @param index the index in the buffer to write the address to.
* @param address the address to write.
* @return the size in bytes the address actually took.
*/
private static int writeVariableAddress(final byte[] buffer, int index, final int address) {
switch (getByteSize(address)) {
case 1:
buffer[index++] = (byte)address;
return 1;
case 2:
buffer[index++] = (byte)(0xFF & (address >> 8));
buffer[index++] = (byte)(0xFF & address);
return 2;
case 3:
buffer[index++] = (byte)(0xFF & (address >> 16));
buffer[index++] = (byte)(0xFF & (address >> 8));
buffer[index++] = (byte)(0xFF & address);
return 3;
case 0:
return 0;
default:
throw new RuntimeException("Address " + address + " has a strange size");
}
}
/**
* Helper method to write a variable-size signed address to a file.
*
* @param buffer the buffer to write to.
* @param index the index in the buffer to write the address to.
* @param address the address to write.
* @return the size in bytes the address actually took.
*/
private static int writeVariableSignedAddress(final byte[] buffer, int index,
final int address) {
if (!hasChildrenAddress(address)) {
buffer[index] = buffer[index + 1] = buffer[index + 2] = 0;
} else {
final int absAddress = Math.abs(address);
buffer[index++] = (byte)((address < 0 ? MSB8 : 0) | (0xFF & (absAddress >> 16)));
buffer[index++] = (byte)(0xFF & (absAddress >> 8));
buffer[index++] = (byte)(0xFF & absAddress);
}
return 3;
}
private static byte makeCharGroupFlags(final CharGroup group, final int groupAddress,
final int childrenOffset, final FormatOptions formatOptions) {
byte flags = 0;
if (group.mChars.length > 1) flags |= FormatSpec.FLAG_HAS_MULTIPLE_CHARS;
if (group.mFrequency >= 0) {
flags |= FormatSpec.FLAG_IS_TERMINAL;
}
if (null != group.mChildren) {
final int byteSize = formatOptions.mSupportsDynamicUpdate
? FormatSpec.SIGNED_CHILDREN_ADDRESS_SIZE : getByteSize(childrenOffset);
switch (byteSize) {
case 1:
flags |= FormatSpec.FLAG_GROUP_ADDRESS_TYPE_ONEBYTE;
break;
case 2:
flags |= FormatSpec.FLAG_GROUP_ADDRESS_TYPE_TWOBYTES;
break;
case 3:
flags |= FormatSpec.FLAG_GROUP_ADDRESS_TYPE_THREEBYTES;
break;
default:
throw new RuntimeException("Node with a strange address");
}
} else if (formatOptions.mSupportsDynamicUpdate) {
flags |= FormatSpec.FLAG_GROUP_ADDRESS_TYPE_THREEBYTES;
}
if (null != group.mShortcutTargets) {
if (DBG && 0 == group.mShortcutTargets.size()) {
throw new RuntimeException("0-sized shortcut list must be null");
}
flags |= FormatSpec.FLAG_HAS_SHORTCUT_TARGETS;
}
if (null != group.mBigrams) {
if (DBG && 0 == group.mBigrams.size()) {
throw new RuntimeException("0-sized bigram list must be null");
}
flags |= FormatSpec.FLAG_HAS_BIGRAMS;
}
if (group.mIsNotAWord) {
flags |= FormatSpec.FLAG_IS_NOT_A_WORD;
}
if (group.mIsBlacklistEntry) {
flags |= FormatSpec.FLAG_IS_BLACKLISTED;
}
return flags;
}
/**
* Makes the flag value for a bigram.
*
* @param more whether there are more bigrams after this one.
* @param offset the offset of the bigram.
* @param bigramFrequency the frequency of the bigram, 0..255.
* @param unigramFrequency the unigram frequency of the same word, 0..255.
* @param word the second bigram, for debugging purposes
* @return the flags
*/
private static final int makeBigramFlags(final boolean more, final int offset,
int bigramFrequency, final int unigramFrequency, final String word) {
int bigramFlags = (more ? FormatSpec.FLAG_ATTRIBUTE_HAS_NEXT : 0)
+ (offset < 0 ? FormatSpec.FLAG_ATTRIBUTE_OFFSET_NEGATIVE : 0);
switch (getByteSize(offset)) {
case 1:
bigramFlags |= FormatSpec.FLAG_ATTRIBUTE_ADDRESS_TYPE_ONEBYTE;
break;
case 2:
bigramFlags |= FormatSpec.FLAG_ATTRIBUTE_ADDRESS_TYPE_TWOBYTES;
break;
case 3:
bigramFlags |= FormatSpec.FLAG_ATTRIBUTE_ADDRESS_TYPE_THREEBYTES;
break;
default:
throw new RuntimeException("Strange offset size");
}
if (unigramFrequency > bigramFrequency) {
MakedictLog.e("Unigram freq is superior to bigram freq for \"" + word
+ "\". Bigram freq is " + bigramFrequency + ", unigram freq for "
+ word + " is " + unigramFrequency);
bigramFrequency = unigramFrequency;
}
// We compute the difference between 255 (which means probability = 1) and the
// unigram score. We split this into a number of discrete steps.
// Now, the steps are numbered 0~15; 0 represents an increase of 1 step while 15
// represents an increase of 16 steps: a value of 15 will be interpreted as the median
// value of the 16th step. In all justice, if the bigram frequency is low enough to be
// rounded below the first step (which means it is less than half a step higher than the
// unigram frequency) then the unigram frequency itself is the best approximation of the
// bigram freq that we could possibly supply, hence we should *not* include this bigram
// in the file at all.
// until this is done, we'll write 0 and slightly overestimate this case.
// In other words, 0 means "between 0.5 step and 1.5 step", 1 means "between 1.5 step
// and 2.5 steps", and 15 means "between 15.5 steps and 16.5 steps". So we want to
// divide our range [unigramFreq..MAX_TERMINAL_FREQUENCY] in 16.5 steps to get the
// step size. Then we compute the start of the first step (the one where value 0 starts)
// by adding half-a-step to the unigramFrequency. From there, we compute the integer
// number of steps to the bigramFrequency. One last thing: we want our steps to include
// their lower bound and exclude their higher bound so we need to have the first step
// start at exactly 1 unit higher than floor(unigramFreq + half a step).
// Note : to reconstruct the score, the dictionary reader will need to divide
// MAX_TERMINAL_FREQUENCY - unigramFreq by 16.5 likewise to get the value of the step,
// and add (discretizedFrequency + 0.5 + 0.5) times this value to get the best
// approximation. (0.5 to get the first step start, and 0.5 to get the middle of the
// step pointed by the discretized frequency.
final float stepSize =
(FormatSpec.MAX_TERMINAL_FREQUENCY - unigramFrequency)
/ (1.5f + FormatSpec.MAX_BIGRAM_FREQUENCY);
final float firstStepStart = 1 + unigramFrequency + (stepSize / 2.0f);
final int discretizedFrequency = (int)((bigramFrequency - firstStepStart) / stepSize);
// If the bigram freq is less than half-a-step higher than the unigram freq, we get -1
// here. The best approximation would be the unigram freq itself, so we should not
// include this bigram in the dictionary. For now, register as 0, and live with the
// small over-estimation that we get in this case. TODO: actually remove this bigram
// if discretizedFrequency < 0.
final int finalBigramFrequency = discretizedFrequency > 0 ? discretizedFrequency : 0;
bigramFlags += finalBigramFrequency & FormatSpec.FLAG_ATTRIBUTE_FREQUENCY;
return bigramFlags;
}
/**
* Makes the 2-byte value for options flags.
*/
private static final int makeOptionsValue(final FusionDictionary dictionary,
final FormatOptions formatOptions) {
final DictionaryOptions options = dictionary.mOptions;
final boolean hasBigrams = dictionary.hasBigrams();
return (options.mFrenchLigatureProcessing ? FormatSpec.FRENCH_LIGATURE_PROCESSING_FLAG : 0)
+ (options.mGermanUmlautProcessing ? FormatSpec.GERMAN_UMLAUT_PROCESSING_FLAG : 0)
+ (hasBigrams ? FormatSpec.CONTAINS_BIGRAMS_FLAG : 0)
+ (formatOptions.mSupportsDynamicUpdate ? FormatSpec.SUPPORTS_DYNAMIC_UPDATE : 0);
}
/**
* Makes the flag value for a shortcut.
*
* @param more whether there are more attributes after this one.
* @param frequency the frequency of the attribute, 0..15
* @return the flags
*/
private static final int makeShortcutFlags(final boolean more, final int frequency) {
return (more ? FormatSpec.FLAG_ATTRIBUTE_HAS_NEXT : 0)
+ (frequency & FormatSpec.FLAG_ATTRIBUTE_FREQUENCY);
}
private static final int writeParentAddress(final byte[] buffer, final int index,
final int address, final FormatOptions formatOptions) {
if (supportsDynamicUpdate(formatOptions)) {
if (address == FormatSpec.NO_PARENT_ADDRESS) {
buffer[index] = buffer[index + 1] = buffer[index + 2] = 0;
} else {
final int absAddress = Math.abs(address);
assert(absAddress <= SINT24_MAX);
buffer[index] = (byte)((address < 0 ? MSB8 : 0)
| ((absAddress >> 16) & 0xFF));
buffer[index + 1] = (byte)((absAddress >> 8) & 0xFF);
buffer[index + 2] = (byte)(absAddress & 0xFF);
}
return index + 3;
} else {
return index;
}
}
/**
* Write a node to memory. The node is expected to have its final position cached.
*
* This can be an empty map, but the more is inside the faster the lookups will be. It can
* be carried on as long as nodes do not move.
*
* @param dict the dictionary the node is a part of (for relative offsets).
* @param buffer the memory buffer to write to.
* @param node the node to write.
* @param formatOptions file format options.
* @return the address of the END of the node.
*/
private static int writePlacedNode(final FusionDictionary dict, byte[] buffer,
final Node node, final FormatOptions formatOptions) {
int index = node.mCachedAddress;
final int groupCount = node.mData.size();
final int countSize = getGroupCountSize(node);
final int parentAddress = node.mCachedParentAddress;
if (1 == countSize) {
buffer[index++] = (byte)groupCount;
} else if (2 == countSize) {
// We need to signal 2-byte size by setting the top bit of the MSB to 1, so
// we | 0x80 to do this.
buffer[index++] = (byte)((groupCount >> 8) | 0x80);
buffer[index++] = (byte)(groupCount & 0xFF);
} else {
throw new RuntimeException("Strange size from getGroupCountSize : " + countSize);
}
int groupAddress = index;
for (int i = 0; i < groupCount; ++i) {
CharGroup group = node.mData.get(i);
if (index != group.mCachedAddress) throw new RuntimeException("Bug: write index is not "
+ "the same as the cached address of the group : "
+ index + " <> " + group.mCachedAddress);
groupAddress += getGroupHeaderSize(group, formatOptions);
// Sanity checks.
if (DBG && group.mFrequency > FormatSpec.MAX_TERMINAL_FREQUENCY) {
throw new RuntimeException("A node has a frequency > "
+ FormatSpec.MAX_TERMINAL_FREQUENCY
+ " : " + group.mFrequency);
}
if (group.mFrequency >= 0) groupAddress += FormatSpec.GROUP_FREQUENCY_SIZE;
final int childrenOffset = null == group.mChildren
? FormatSpec.NO_CHILDREN_ADDRESS
: group.mChildren.mCachedAddress - groupAddress;
byte flags = makeCharGroupFlags(group, groupAddress, childrenOffset, formatOptions);
buffer[index++] = flags;
if (parentAddress == FormatSpec.NO_PARENT_ADDRESS) {
index = writeParentAddress(buffer, index, parentAddress, formatOptions);
} else {
index = writeParentAddress(buffer, index,
parentAddress + (node.mCachedAddress - group.mCachedAddress),
formatOptions);
}
index = CharEncoding.writeCharArray(group.mChars, buffer, index);
if (group.hasSeveralChars()) {
buffer[index++] = FormatSpec.GROUP_CHARACTERS_TERMINATOR;
}
if (group.mFrequency >= 0) {
buffer[index++] = (byte) group.mFrequency;
}
final int shift;
if (formatOptions.mSupportsDynamicUpdate) {
shift = writeVariableSignedAddress(buffer, index, childrenOffset);
} else {
shift = writeVariableAddress(buffer, index, childrenOffset);
}
index += shift;
groupAddress += shift;
// Write shortcuts
if (null != group.mShortcutTargets) {
final int indexOfShortcutByteSize = index;
index += FormatSpec.GROUP_SHORTCUT_LIST_SIZE_SIZE;
groupAddress += FormatSpec.GROUP_SHORTCUT_LIST_SIZE_SIZE;
final Iterator<WeightedString> shortcutIterator = group.mShortcutTargets.iterator();
while (shortcutIterator.hasNext()) {
final WeightedString target = shortcutIterator.next();
++groupAddress;
int shortcutFlags = makeShortcutFlags(shortcutIterator.hasNext(),
target.mFrequency);
buffer[index++] = (byte)shortcutFlags;
final int shortcutShift = CharEncoding.writeString(buffer, index, target.mWord);
index += shortcutShift;
groupAddress += shortcutShift;
}
final int shortcutByteSize = index - indexOfShortcutByteSize;
if (shortcutByteSize > 0xFFFF) {
throw new RuntimeException("Shortcut list too large");
}
buffer[indexOfShortcutByteSize] = (byte)(shortcutByteSize >> 8);
buffer[indexOfShortcutByteSize + 1] = (byte)(shortcutByteSize & 0xFF);
}
// Write bigrams
if (null != group.mBigrams) {
final Iterator<WeightedString> bigramIterator = group.mBigrams.iterator();
while (bigramIterator.hasNext()) {
final WeightedString bigram = bigramIterator.next();
final CharGroup target =
FusionDictionary.findWordInTree(dict.mRoot, bigram.mWord);
final int addressOfBigram = target.mCachedAddress;
final int unigramFrequencyForThisWord = target.mFrequency;
++groupAddress;
final int offset = addressOfBigram - groupAddress;
int bigramFlags = makeBigramFlags(bigramIterator.hasNext(), offset,
bigram.mFrequency, unigramFrequencyForThisWord, bigram.mWord);
buffer[index++] = (byte)bigramFlags;
final int bigramShift = writeVariableAddress(buffer, index, Math.abs(offset));
index += bigramShift;
groupAddress += bigramShift;
}
}
}
if (formatOptions.mSupportsDynamicUpdate) {
buffer[index] = buffer[index + 1] = buffer[index + 2]
= FormatSpec.NO_FORWARD_LINK_ADDRESS;
index += FormatSpec.FORWARD_LINK_ADDRESS_SIZE;
}
if (index != node.mCachedAddress + node.mCachedSize) throw new RuntimeException(
"Not the same size : written "
+ (index - node.mCachedAddress) + " bytes out of a node that should have "
+ node.mCachedSize + " bytes");
return index;
}
/**
* Dumps a collection of useful statistics about a node array.
*
* This prints purely informative stuff, like the total estimated file size, the
* number of nodes, of character groups, the repartition of each address size, etc
*
* @param nodes the node array.
*/
private static void showStatistics(ArrayList<Node> nodes) {
int firstTerminalAddress = Integer.MAX_VALUE;
int lastTerminalAddress = Integer.MIN_VALUE;
int size = 0;
int charGroups = 0;
int maxGroups = 0;
int maxRuns = 0;
for (Node n : nodes) {
if (maxGroups < n.mData.size()) maxGroups = n.mData.size();
for (CharGroup cg : n.mData) {
++charGroups;
if (cg.mChars.length > maxRuns) maxRuns = cg.mChars.length;
if (cg.mFrequency >= 0) {
if (n.mCachedAddress < firstTerminalAddress)
firstTerminalAddress = n.mCachedAddress;
if (n.mCachedAddress > lastTerminalAddress)
lastTerminalAddress = n.mCachedAddress;
}
}
if (n.mCachedAddress + n.mCachedSize > size) size = n.mCachedAddress + n.mCachedSize;
}
final int[] groupCounts = new int[maxGroups + 1];
final int[] runCounts = new int[maxRuns + 1];
for (Node n : nodes) {
++groupCounts[n.mData.size()];
for (CharGroup cg : n.mData) {
++runCounts[cg.mChars.length];
}
}
MakedictLog.i("Statistics:\n"
+ " total file size " + size + "\n"
+ " " + nodes.size() + " nodes\n"
+ " " + charGroups + " groups (" + ((float)charGroups / nodes.size())
+ " groups per node)\n"
+ " first terminal at " + firstTerminalAddress + "\n"
+ " last terminal at " + lastTerminalAddress + "\n"
+ " Group stats : max = " + maxGroups);
for (int i = 0; i < groupCounts.length; ++i) {
MakedictLog.i(" " + i + " : " + groupCounts[i]);
}
MakedictLog.i(" Character run stats : max = " + maxRuns);
for (int i = 0; i < runCounts.length; ++i) {
MakedictLog.i(" " + i + " : " + runCounts[i]);
}
}
/**
* Dumps a FusionDictionary to a file.
*
* This is the public entry point to write a dictionary to a file.
*
* @param destination the stream to write the binary data to.
* @param dict the dictionary to write.
* @param formatOptions file format options.
*/
public static void writeDictionaryBinary(final OutputStream destination,
final FusionDictionary dict, final FormatOptions formatOptions)
throws IOException, UnsupportedFormatException {
// Addresses are limited to 3 bytes, but since addresses can be relative to each node, the
// structure itself is not limited to 16MB. However, if it is over 16MB deciding the order
// of the nodes becomes a quite complicated problem, because though the dictionary itself
// does not have a size limit, each node must still be within 16MB of all its children and
// parents. As long as this is ensured, the dictionary file may grow to any size.
final int version = formatOptions.mVersion;
if (version < FormatSpec.MINIMUM_SUPPORTED_VERSION
|| version > FormatSpec.MAXIMUM_SUPPORTED_VERSION) {
throw new UnsupportedFormatException("Requested file format version " + version
+ ", but this implementation only supports versions "
+ FormatSpec.MINIMUM_SUPPORTED_VERSION + " through "
+ FormatSpec.MAXIMUM_SUPPORTED_VERSION);
}
ByteArrayOutputStream headerBuffer = new ByteArrayOutputStream(256);
// The magic number in big-endian order.
if (version >= FormatSpec.FIRST_VERSION_WITH_HEADER_SIZE) {
// Magic number for version 2+.
headerBuffer.write((byte) (0xFF & (FormatSpec.VERSION_2_MAGIC_NUMBER >> 24)));
headerBuffer.write((byte) (0xFF & (FormatSpec.VERSION_2_MAGIC_NUMBER >> 16)));
headerBuffer.write((byte) (0xFF & (FormatSpec.VERSION_2_MAGIC_NUMBER >> 8)));
headerBuffer.write((byte) (0xFF & FormatSpec.VERSION_2_MAGIC_NUMBER));
// Dictionary version.
headerBuffer.write((byte) (0xFF & (version >> 8)));
headerBuffer.write((byte) (0xFF & version));
} else {
// Magic number for version 1.
headerBuffer.write((byte) (0xFF & (FormatSpec.VERSION_1_MAGIC_NUMBER >> 8)));
headerBuffer.write((byte) (0xFF & FormatSpec.VERSION_1_MAGIC_NUMBER));
// Dictionary version.
headerBuffer.write((byte) (0xFF & version));
}
// Options flags
final int options = makeOptionsValue(dict, formatOptions);
headerBuffer.write((byte) (0xFF & (options >> 8)));
headerBuffer.write((byte) (0xFF & options));
if (version >= FormatSpec.FIRST_VERSION_WITH_HEADER_SIZE) {
final int headerSizeOffset = headerBuffer.size();
// Placeholder to be written later with header size.
for (int i = 0; i < 4; ++i) {
headerBuffer.write(0);
}
// Write out the options.
for (final String key : dict.mOptions.mAttributes.keySet()) {
final String value = dict.mOptions.mAttributes.get(key);
CharEncoding.writeString(headerBuffer, key);
CharEncoding.writeString(headerBuffer, value);
}
final int size = headerBuffer.size();
final byte[] bytes = headerBuffer.toByteArray();
// Write out the header size.
bytes[headerSizeOffset] = (byte) (0xFF & (size >> 24));
bytes[headerSizeOffset + 1] = (byte) (0xFF & (size >> 16));
bytes[headerSizeOffset + 2] = (byte) (0xFF & (size >> 8));
bytes[headerSizeOffset + 3] = (byte) (0xFF & (size >> 0));
destination.write(bytes);
} else {
headerBuffer.writeTo(destination);
}
headerBuffer.close();
// Leave the choice of the optimal node order to the flattenTree function.
MakedictLog.i("Flattening the tree...");
ArrayList<Node> flatNodes = flattenTree(dict.mRoot);
MakedictLog.i("Computing addresses...");
computeAddresses(dict, flatNodes, formatOptions);
MakedictLog.i("Checking array...");
if (DBG) checkFlatNodeArray(flatNodes);
// Create a buffer that matches the final dictionary size.
final Node lastNode = flatNodes.get(flatNodes.size() - 1);
final int bufferSize = lastNode.mCachedAddress + lastNode.mCachedSize;
final byte[] buffer = new byte[bufferSize];
int index = 0;
MakedictLog.i("Writing file...");
int dataEndOffset = 0;
for (Node n : flatNodes) {
dataEndOffset = writePlacedNode(dict, buffer, n, formatOptions);
}
if (DBG) showStatistics(flatNodes);
destination.write(buffer, 0, dataEndOffset);
destination.close();
MakedictLog.i("Done");
}
// Input methods: Read a binary dictionary to memory.
// readDictionaryBinary is the public entry point for them.
private static int getChildrenAddressSize(final int optionFlags,
final FormatOptions formatOptions) {
if (formatOptions.mSupportsDynamicUpdate) return FormatSpec.SIGNED_CHILDREN_ADDRESS_SIZE;
switch (optionFlags & FormatSpec.MASK_GROUP_ADDRESS_TYPE) {
case FormatSpec.FLAG_GROUP_ADDRESS_TYPE_ONEBYTE:
return 1;
case FormatSpec.FLAG_GROUP_ADDRESS_TYPE_TWOBYTES:
return 2;
case FormatSpec.FLAG_GROUP_ADDRESS_TYPE_THREEBYTES:
return 3;
case FormatSpec.FLAG_GROUP_ADDRESS_TYPE_NOADDRESS:
default:
return 0;
}
}
private static int readChildrenAddress(final FusionDictionaryBufferInterface buffer,
final int optionFlags, final FormatOptions options) {
if (options.mSupportsDynamicUpdate) {
final int address = buffer.readUnsignedInt24();
if (address == 0) return FormatSpec.NO_CHILDREN_ADDRESS;
if ((address & MSB24) != 0) {
return -(address & SINT24_MAX);
} else {
return address;
}
}
int address;
switch (optionFlags & FormatSpec.MASK_GROUP_ADDRESS_TYPE) {
case FormatSpec.FLAG_GROUP_ADDRESS_TYPE_ONEBYTE:
return buffer.readUnsignedByte();
case FormatSpec.FLAG_GROUP_ADDRESS_TYPE_TWOBYTES:
return buffer.readUnsignedShort();
case FormatSpec.FLAG_GROUP_ADDRESS_TYPE_THREEBYTES:
return buffer.readUnsignedInt24();
case FormatSpec.FLAG_GROUP_ADDRESS_TYPE_NOADDRESS:
default:
return FormatSpec.NO_CHILDREN_ADDRESS;
}
}
private static int readParentAddress(final FusionDictionaryBufferInterface buffer,
final FormatOptions formatOptions) {
if (supportsDynamicUpdate(formatOptions)) {
final int parentAddress = buffer.readUnsignedInt24();
final int sign = ((parentAddress & MSB24) != 0) ? -1 : 1;
return sign * (parentAddress & SINT24_MAX);
} else {
return FormatSpec.NO_PARENT_ADDRESS;
}
}
private static final int[] CHARACTER_BUFFER = new int[FormatSpec.MAX_WORD_LENGTH];
public static CharGroupInfo readCharGroup(final FusionDictionaryBufferInterface buffer,
final int originalGroupAddress, final FormatOptions options) {
int addressPointer = originalGroupAddress;
final int flags = buffer.readUnsignedByte();
++addressPointer;
final int parentAddress = readParentAddress(buffer, options);
if (supportsDynamicUpdate(options)) {
addressPointer += 3;
}
final int characters[];
if (0 != (flags & FormatSpec.FLAG_HAS_MULTIPLE_CHARS)) {
int index = 0;
int character = CharEncoding.readChar(buffer);
addressPointer += CharEncoding.getCharSize(character);
while (-1 != character) {
// FusionDictionary is making sure that the length of the word is smaller than
// MAX_WORD_LENGTH.
// So we'll never write past the end of CHARACTER_BUFFER.
CHARACTER_BUFFER[index++] = character;
character = CharEncoding.readChar(buffer);
addressPointer += CharEncoding.getCharSize(character);
}
characters = Arrays.copyOfRange(CHARACTER_BUFFER, 0, index);
} else {
final int character = CharEncoding.readChar(buffer);
addressPointer += CharEncoding.getCharSize(character);
characters = new int[] { character };
}
final int frequency;
if (0 != (FormatSpec.FLAG_IS_TERMINAL & flags)) {
++addressPointer;
frequency = buffer.readUnsignedByte();
} else {
frequency = CharGroup.NOT_A_TERMINAL;
}
int childrenAddress = readChildrenAddress(buffer, flags, options);
if (childrenAddress != FormatSpec.NO_CHILDREN_ADDRESS) {
childrenAddress += addressPointer;
}
addressPointer += getChildrenAddressSize(flags, options);
ArrayList<WeightedString> shortcutTargets = null;
if (0 != (flags & FormatSpec.FLAG_HAS_SHORTCUT_TARGETS)) {
final int pointerBefore = buffer.position();
shortcutTargets = new ArrayList<WeightedString>();
buffer.readUnsignedShort(); // Skip the size
while (true) {
final int targetFlags = buffer.readUnsignedByte();
final String word = CharEncoding.readString(buffer);
shortcutTargets.add(new WeightedString(word,
targetFlags & FormatSpec.FLAG_ATTRIBUTE_FREQUENCY));
if (0 == (targetFlags & FormatSpec.FLAG_ATTRIBUTE_HAS_NEXT)) break;
}
addressPointer += buffer.position() - pointerBefore;
}
ArrayList<PendingAttribute> bigrams = null;
if (0 != (flags & FormatSpec.FLAG_HAS_BIGRAMS)) {
bigrams = new ArrayList<PendingAttribute>();
while (true) {
final int bigramFlags = buffer.readUnsignedByte();
++addressPointer;
final int sign = 0 == (bigramFlags & FormatSpec.FLAG_ATTRIBUTE_OFFSET_NEGATIVE)
? 1 : -1;
int bigramAddress = addressPointer;
switch (bigramFlags & FormatSpec.MASK_ATTRIBUTE_ADDRESS_TYPE) {
case FormatSpec.FLAG_ATTRIBUTE_ADDRESS_TYPE_ONEBYTE:
bigramAddress += sign * buffer.readUnsignedByte();
addressPointer += 1;
break;
case FormatSpec.FLAG_ATTRIBUTE_ADDRESS_TYPE_TWOBYTES:
bigramAddress += sign * buffer.readUnsignedShort();
addressPointer += 2;
break;
case FormatSpec.FLAG_ATTRIBUTE_ADDRESS_TYPE_THREEBYTES:
final int offset = (buffer.readUnsignedByte() << 16)
+ buffer.readUnsignedShort();
bigramAddress += sign * offset;
addressPointer += 3;
break;
default:
throw new RuntimeException("Has bigrams with no address");
}
bigrams.add(new PendingAttribute(bigramFlags & FormatSpec.FLAG_ATTRIBUTE_FREQUENCY,
bigramAddress));
if (0 == (bigramFlags & FormatSpec.FLAG_ATTRIBUTE_HAS_NEXT)) break;
}
}
return new CharGroupInfo(originalGroupAddress, addressPointer, flags, characters, frequency,
parentAddress, childrenAddress, shortcutTargets, bigrams);
}
/**
* Reads and returns the char group count out of a buffer and forwards the pointer.
*/
public static int readCharGroupCount(final FusionDictionaryBufferInterface buffer) {
final int msb = buffer.readUnsignedByte();
if (FormatSpec.MAX_CHARGROUPS_FOR_ONE_BYTE_CHARGROUP_COUNT >= msb) {
return msb;
} else {
return ((FormatSpec.MAX_CHARGROUPS_FOR_ONE_BYTE_CHARGROUP_COUNT & msb) << 8)
+ buffer.readUnsignedByte();
}
}
// The word cache here is a stopgap bandaid to help the catastrophic performance
// of this method. Since it performs direct, unbuffered random access to the file and
// may be called hundreds of thousands of times, the resulting performance is not
// reasonable without some kind of cache. Thus:
private static TreeMap<Integer, String> wordCache = new TreeMap<Integer, String>();
/**
* Finds, as a string, the word at the address passed as an argument.
*
* @param buffer the buffer to read from.
* @param headerSize the size of the header.
* @param address the address to seek.
* @param formatOptions file format options.
* @return the word, as a string.
*/
/* packages for tests */ static String getWordAtAddress(
final FusionDictionaryBufferInterface buffer, final int headerSize, final int address,
final FormatOptions formatOptions) {
final String cachedString = wordCache.get(address);
if (null != cachedString) return cachedString;
final String result;
final int originalPointer = buffer.position();
buffer.position(address);
if (supportsDynamicUpdate(formatOptions)) {
result = getWordAtAddressWithParentAddress(buffer, headerSize, address, formatOptions);
} else {
result = getWordAtAddressWithoutParentAddress(buffer, headerSize, address,
formatOptions);
}
wordCache.put(address, result);
buffer.position(originalPointer);
return result;
}
private static int[] sGetWordBuffer = new int[FormatSpec.MAX_WORD_LENGTH];
private static String getWordAtAddressWithParentAddress(
final FusionDictionaryBufferInterface buffer, final int headerSize, final int address,
final FormatOptions options) {
final StringBuilder builder = new StringBuilder();
int currentAddress = address;
int index = FormatSpec.MAX_WORD_LENGTH - 1;
// the length of the path from the root to the leaf is limited by MAX_WORD_LENGTH
for (int count = 0; count < FormatSpec.MAX_WORD_LENGTH; ++count) {
CharGroupInfo currentInfo;
int loopCounter = 0;
do {
buffer.position(currentAddress + headerSize);
currentInfo = readCharGroup(buffer, currentAddress, options);
if (isMovedGroup(currentInfo.mFlags, options)) {
currentAddress = currentInfo.mParentAddress + currentInfo.mOriginalAddress;
}
if (DBG && loopCounter++ > MAX_JUMPS) {
MakedictLog.d("Too many jumps - probably a bug");
}
} while (isMovedGroup(currentInfo.mFlags, options));
for (int i = 0; i < currentInfo.mCharacters.length; ++i) {
sGetWordBuffer[index--] =
currentInfo.mCharacters[currentInfo.mCharacters.length - i - 1];
}
if (currentInfo.mParentAddress == FormatSpec.NO_PARENT_ADDRESS) break;
currentAddress = currentInfo.mParentAddress + currentInfo.mOriginalAddress;
}
return new String(sGetWordBuffer, index + 1, FormatSpec.MAX_WORD_LENGTH - index - 1);
}
private static String getWordAtAddressWithoutParentAddress(
final FusionDictionaryBufferInterface buffer, final int headerSize, final int address,
final FormatOptions options) {
buffer.position(headerSize);
final int count = readCharGroupCount(buffer);
int groupOffset = getGroupCountSize(count);
final StringBuilder builder = new StringBuilder();
String result = null;
CharGroupInfo last = null;
for (int i = count - 1; i >= 0; --i) {
CharGroupInfo info = readCharGroup(buffer, groupOffset, options);
groupOffset = info.mEndAddress;
if (info.mOriginalAddress == address) {
builder.append(new String(info.mCharacters, 0, info.mCharacters.length));
result = builder.toString();
break; // and return
}
if (hasChildrenAddress(info.mChildrenAddress)) {
if (info.mChildrenAddress > address) {
if (null == last) continue;
builder.append(new String(last.mCharacters, 0, last.mCharacters.length));
buffer.position(last.mChildrenAddress + headerSize);
groupOffset = last.mChildrenAddress + 1;
i = buffer.readUnsignedByte();
last = null;
continue;
}
last = info;
}
if (0 == i && hasChildrenAddress(last.mChildrenAddress)) {
builder.append(new String(last.mCharacters, 0, last.mCharacters.length));
buffer.position(last.mChildrenAddress + headerSize);
groupOffset = last.mChildrenAddress + 1;
i = buffer.readUnsignedByte();
last = null;
continue;
}
}
return result;
}
/**
* Reads a single node from a buffer.
*
* This methods reads the file at the current position. A node is fully expected to start at
* the current position.
* This will recursively read other nodes into the structure, populating the reverse
* maps on the fly and using them to keep track of already read nodes.
*
* @param buffer the buffer, correctly positioned at the start of a node.
* @param headerSize the size, in bytes, of the file header.
* @param reverseNodeMap a mapping from addresses to already read nodes.
* @param reverseGroupMap a mapping from addresses to already read character groups.
* @param options file format options.
* @return the read node with all his children already read.
*/
private static Node readNode(final FusionDictionaryBufferInterface buffer, final int headerSize,
final Map<Integer, Node> reverseNodeMap, final Map<Integer, CharGroup> reverseGroupMap,
final FormatOptions options)
throws IOException {
final ArrayList<CharGroup> nodeContents = new ArrayList<CharGroup>();
final int nodeOrigin = buffer.position() - headerSize;
do { // Scan the linked-list node.
final int nodeHeadPosition = buffer.position() - headerSize;
final int count = readCharGroupCount(buffer);
int groupOffset = nodeHeadPosition + getGroupCountSize(count);
for (int i = count; i > 0; --i) { // Scan the array of CharGroup.
CharGroupInfo info = readCharGroup(buffer, groupOffset, options);
if (isMovedGroup(info.mFlags, options)) continue;
ArrayList<WeightedString> shortcutTargets = info.mShortcutTargets;
ArrayList<WeightedString> bigrams = null;
if (null != info.mBigrams) {
bigrams = new ArrayList<WeightedString>();
for (PendingAttribute bigram : info.mBigrams) {
final String word = getWordAtAddress(
buffer, headerSize, bigram.mAddress, options);
bigrams.add(new WeightedString(word, bigram.mFrequency));
}
}
if (hasChildrenAddress(info.mChildrenAddress)) {
Node children = reverseNodeMap.get(info.mChildrenAddress);
if (null == children) {
final int currentPosition = buffer.position();
buffer.position(info.mChildrenAddress + headerSize);
children = readNode(
buffer, headerSize, reverseNodeMap, reverseGroupMap, options);
buffer.position(currentPosition);
}
nodeContents.add(
new CharGroup(info.mCharacters, shortcutTargets, bigrams,
info.mFrequency,
0 != (info.mFlags & FormatSpec.FLAG_IS_NOT_A_WORD),
0 != (info.mFlags & FormatSpec.FLAG_IS_BLACKLISTED), children));
} else {
nodeContents.add(
new CharGroup(info.mCharacters, shortcutTargets, bigrams,
info.mFrequency,
0 != (info.mFlags & FormatSpec.FLAG_IS_NOT_A_WORD),
0 != (info.mFlags & FormatSpec.FLAG_IS_BLACKLISTED)));
}
groupOffset = info.mEndAddress;
}
// reach the end of the array.
if (options.mSupportsDynamicUpdate) {
final int nextAddress = buffer.readUnsignedInt24();
if (nextAddress >= 0 && nextAddress < buffer.limit()) {
buffer.position(nextAddress);
} else {
break;
}
}
} while (options.mSupportsDynamicUpdate &&
buffer.position() != FormatSpec.NO_FORWARD_LINK_ADDRESS);
final Node node = new Node(nodeContents);
node.mCachedAddress = nodeOrigin;
reverseNodeMap.put(node.mCachedAddress, node);
return node;
}
/**
* Helper function to get the binary format version from the header.
* @throws IOException
*/
private static int getFormatVersion(final FusionDictionaryBufferInterface buffer)
throws IOException {
final int magic_v1 = buffer.readUnsignedShort();
if (FormatSpec.VERSION_1_MAGIC_NUMBER == magic_v1) return buffer.readUnsignedByte();
final int magic_v2 = (magic_v1 << 16) + buffer.readUnsignedShort();
if (FormatSpec.VERSION_2_MAGIC_NUMBER == magic_v2) return buffer.readUnsignedShort();
return FormatSpec.NOT_A_VERSION_NUMBER;
}
/**
* Helper function to get and validate the binary format version.
* @throws UnsupportedFormatException
* @throws IOException
*/
private static int checkFormatVersion(final FusionDictionaryBufferInterface buffer)
throws IOException, UnsupportedFormatException {
final int version = getFormatVersion(buffer);
if (version < FormatSpec.MINIMUM_SUPPORTED_VERSION
|| version > FormatSpec.MAXIMUM_SUPPORTED_VERSION) {
throw new UnsupportedFormatException("This file has version " + version
+ ", but this implementation does not support versions above "
+ FormatSpec.MAXIMUM_SUPPORTED_VERSION);
}
return version;
}
/**
* Reads a header from a buffer.
* @param buffer the buffer to read.
* @throws IOException
* @throws UnsupportedFormatException
*/
public static FileHeader readHeader(final FusionDictionaryBufferInterface buffer)
throws IOException, UnsupportedFormatException {
final int version = checkFormatVersion(buffer);
final int optionsFlags = buffer.readUnsignedShort();
final HashMap<String, String> attributes = new HashMap<String, String>();
final int headerSize;
if (version < FormatSpec.FIRST_VERSION_WITH_HEADER_SIZE) {
headerSize = buffer.position();
} else {
headerSize = buffer.readInt();
populateOptions(buffer, headerSize, attributes);
buffer.position(headerSize);
}
if (headerSize < 0) {
throw new UnsupportedFormatException("header size can't be negative.");
}
final FileHeader header = new FileHeader(headerSize,
new FusionDictionary.DictionaryOptions(attributes,
0 != (optionsFlags & FormatSpec.GERMAN_UMLAUT_PROCESSING_FLAG),
0 != (optionsFlags & FormatSpec.FRENCH_LIGATURE_PROCESSING_FLAG)),
new FormatOptions(version,
0 != (optionsFlags & FormatSpec.SUPPORTS_DYNAMIC_UPDATE)));
return header;
}
/**
* Reads options from a buffer and populate a map with their contents.
*
* The buffer is read at the current position, so the caller must take care the pointer
* is in the right place before calling this.
*/
public static void populateOptions(final FusionDictionaryBufferInterface buffer,
final int headerSize, final HashMap<String, String> options) {
while (buffer.position() < headerSize) {
final String key = CharEncoding.readString(buffer);
final String value = CharEncoding.readString(buffer);
options.put(key, value);
}
}
/**
* Reads a buffer and returns the memory representation of the dictionary.
*
* This high-level method takes a buffer and reads its contents, populating a
* FusionDictionary structure. The optional dict argument is an existing dictionary to
* which words from the buffer should be added. If it is null, a new dictionary is created.
*
* @param buffer the buffer to read.
* @param dict an optional dictionary to add words to, or null.
* @return the created (or merged) dictionary.
*/
public static FusionDictionary readDictionaryBinary(
final FusionDictionaryBufferInterface buffer, final FusionDictionary dict)
throws IOException, UnsupportedFormatException {
// clear cache
wordCache.clear();
// Read header
final FileHeader header = readHeader(buffer);
Map<Integer, Node> reverseNodeMapping = new TreeMap<Integer, Node>();
Map<Integer, CharGroup> reverseGroupMapping = new TreeMap<Integer, CharGroup>();
final Node root = readNode(buffer, header.mHeaderSize, reverseNodeMapping,
reverseGroupMapping, header.mFormatOptions);
FusionDictionary newDict = new FusionDictionary(root, header.mDictionaryOptions);
if (null != dict) {
for (final Word w : dict) {
if (w.mIsBlacklistEntry) {
newDict.addBlacklistEntry(w.mWord, w.mShortcutTargets, w.mIsNotAWord);
} else {
newDict.add(w.mWord, w.mFrequency, w.mShortcutTargets, w.mIsNotAWord);
}
}
for (final Word w : dict) {
// By construction a binary dictionary may not have bigrams pointing to
// words that are not also registered as unigrams so we don't have to avoid
// them explicitly here.
for (final WeightedString bigram : w.mBigrams) {
newDict.setBigram(w.mWord, bigram.mWord, bigram.mFrequency);
}
}
}
return newDict;
}
/**
* Basic test to find out whether the file is a binary dictionary or not.
*
* Concretely this only tests the magic number.
*
* @param filename The name of the file to test.
* @return true if it's a binary dictionary, false otherwise
*/
public static boolean isBinaryDictionary(final String filename) {
FileInputStream inStream = null;
try {
final File file = new File(filename);
inStream = new FileInputStream(file);
final ByteBuffer buffer = inStream.getChannel().map(
FileChannel.MapMode.READ_ONLY, 0, file.length());
final int version = getFormatVersion(new ByteBufferWrapper(buffer));
return (version >= FormatSpec.MINIMUM_SUPPORTED_VERSION
&& version <= FormatSpec.MAXIMUM_SUPPORTED_VERSION);
} catch (FileNotFoundException e) {
return false;
} catch (IOException e) {
return false;
} finally {
if (inStream != null) {
try {
inStream.close();
} catch (IOException e) {
// do nothing
}
}
}
}
/**
* Calculate bigram frequency from compressed value
*
* @see #makeBigramFlags
*
* @param unigramFrequency
* @param bigramFrequency compressed frequency
* @return approximate bigram frequency
*/
public static int reconstructBigramFrequency(final int unigramFrequency,
final int bigramFrequency) {
final float stepSize = (FormatSpec.MAX_TERMINAL_FREQUENCY - unigramFrequency)
/ (1.5f + FormatSpec.MAX_BIGRAM_FREQUENCY);
final float resultFreqFloat = (float)unigramFrequency
+ stepSize * (bigramFrequency + 1.0f);
return (int)resultFreqFloat;
}
}