Backport #17183
There was a mistake in the template file: `templates/mail/issue/assigned.tmpl`
where the repourl was generated from a non-existent release instead of the issue.
This PR changes this to use the issue but also ensure that the issue repo is loaded.
It also slightly improves the English and the Russian locale string.
Fix#17160
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Backport #16950
The lastLeftIdx should be reset at the same time as creating a new section otherwise
it is possible for a second addition to end up attempting to read a nil entry.
Fix#16943
Signed-off-by: Andrew Thornton <art27@cantab.net>
Backport #16916
Duplicate #15987 to allow access to releases download through BASIC authentication.
Fix#16914
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix dump and restore
* return different error message for get commit
* Fix missing delete release attachment when deleting repository
* Fix ci and add some comments
back port #16698
Co-authored-by: zeripath <art27@cantab.net>
Backport #16775
Gitea has relied on some slow JS code to match up added and deleted lines on the
diff pages. This can cause a considerable slow down on large diff pages.
This PR makes a small change meaning that the matching up can occur much more simply.
Partial fix#1351
Signed-off-by: Andrew Thornton <art27@cantab.net>
Backport #16586
There is a mistake in #16319 and #16487 which means that the first time
a wiki page is created a 500 is reported because the `master` branch is
not in existence in that wiki yet.
This PR simply checks for this error and returns not found.
Fix#16584
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add option to provide signed token to verify key ownership
Currently we will only allow a key to be matched to a user if it matches
an activated email address. This PR provides a different mechanism - if
the user provides a signature for automatically generated token (based
on the timestamp, user creation time, user ID, username and primary
email.
* Ensure verified keys can act for all active emails for the user
* Add code to mark keys as verified
* Slight UI adjustments
* Slight UI adjustments 2
* Simplify signature verification slightly
* fix postgres test
* add api routes
* handle swapped primary-keys
* Verify the no-reply address for verified keys
* Only add email addresses that are activated to keys
* Fix committer shortcut properly
* Restructure gpg_keys.go
* Use common Verification Token code
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add checkbox to delete pull branch after successful merge
* Omit DeleteBranchAfterMerge field in json
* Log a warning instead of error when PR head branch deleted
* Add DefaultDeleteBranchAfterMerge to PullRequestConfig
* Add support for delete_branch_after_merge via API
* Fix for API: the branch should be deleted from the HEAD repo
If head and base repo are the same, reuse the already opened ctx.Repo.GitRepo
* Don't delegate to CleanupBranch, only reuse branch deletion code
CleanupBranch contains too much logic that has already been performed by the Merge
* Reuse gitrepo in MergePullRequest
Co-authored-by: Andrew Thornton <art27@cantab.net>
* fix: not able to update local created non-urlencoded wiki pages
* tidy code
* as per suggestion
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Don't replace space to dash for unescaped wiki filename
Co-authored-by: zeripath <art27@cantab.net>
* Remove incorrect comment
* Remove NameToUnescapedFilename()
Co-authored-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
This PR removes multiple unneeded fields from the `HookTask` struct and adds the two headers `X-Hub-Signature` and `X-Hub-Signature-256`.
## ⚠️ BREAKING ⚠️
* The `Secret` field is no longer passed as part of the payload.
* "Breaking" change (or fix?): The webhook history shows the real called url and not the url registered in the webhook (`deliver.go`@129).
Close#16115Fixes#7788Fixes#11755
Co-authored-by: zeripath <art27@cantab.net>
You can limit or hide organisations. This pull make it also posible for users
- new strings to translte
- add checkbox to user profile form
- add checkbox to admin user.edit form
- filter explore page user search
- filter api admin and public user searches
- allow admins view "hidden" users
- add app option DEFAULT_USER_VISIBILITY
- rewrite many files to use Visibility field
- check for teams intersection
- fix context output
- right fake 404 if not visible
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Andrew Thornton <art27@cantab.net>
* Added support for gopher URLs.
* Add setting and make this user settable instead
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Andrew Thornton <art27@cantab.net>
* Remove superfluous newline before Co-authored-by trailers
* Append to existing PR description trailer section
If the existing PR description message already contains a trailer section (e.g. Signed-off-by: ),
append to it instead of creating a new trailer section.
* Reuse compiled regexp
* Simplify regex and deal with trailing \n in PR description
* Add tests for CommitMessageTrailersPattern
- add support for Key:Value (no space after colon)
- add support for whitespace "folding"
* Update services/pull/pull_test.go
Co-authored-by: Norwin <noerw@users.noreply.github.com>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Norwin <noerw@users.noreply.github.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
remove log() func from gogs times and switch to proper logging
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Andrew Thornton <art27@cantab.net>
* Fix 500 Error with branch and tag sharing the same name #15592
Fixed 500 error while create Pull request when there are more
than one sources (branch, tag) with the same name
Fix#15592
Signed-off-by: Viktor Yakovchuk <viktor@yakovchuk.net>
* fix logging
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: 6543 <6543@obermui.de>
* #14559 Reduce amount of email notifications for WIP draft PR's
don't notify repo watchers of WIP draft PR's
* #13190 Notification when WIP Pull Request is ready for review
* Send email notification to repo watchers when WIP PR is created
* Send ui notification to repo watchers when WIP PR is created
* send specific email notification when PR is marked ready for review
instead of reusing the CreatePullRequest action
* Fix lint error
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Added tests for MS Teams.
* Added tests for Dingtalk.
* Added tests for Telegram.
* Added tests for Feishu.
* Added tests for Discord.
* Added tests for closed issue and pullrequest comment.
* Added tests for Matrix.
* Trim all spaces.
* Added tests for Slack.
* Added JSONPayload tests.
* Added general tests.
* Replaced duplicated code.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Fix bug when delete branch don't close related PRs
* Merge all deletebranch as one method
* Add missed branch.go
* fix comment
Co-authored-by: Lauris BH <lauris@nix.lv>
* Make modules/context.Context a context.Context
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Simplify context calls
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Set the base context for requests to the HammerContext
Signed-off-by: Andrew Thornton <art27@cantab.net>
* pass context into get-last-commit
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Make commit_info cancellable
Signed-off-by: Andrew Thornton <art27@cantab.net>
* use context as context
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
* Restructured code. Moved static checks out of loop.
* Restructured batch api. Add support for individual errors.
* Let router decide if LFS is enabled.
* Renamed methods.
* Return correct status from verify handler.
* Unified media type check in router.
* Changed error code according to spec.
* Moved checks into router.
* Removed invalid v1 api methods.
* Unified methods.
* Display better error messages.
* Added size parameter. Create meta object on upload.
* Use object error on invalid size.
* Skip upload if object exists.
* Moved methods.
* Suppress fields in response.
* Changed error on accept.
* Added tests.
* Use ErrorResponse object.
* Test against message property.
* Add support for the old invalid lfs client.
* Fixed the check because MinIO wraps the error.
* Use individual repositories.
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Make modules/context.Context a context.Context
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Simplify context calls
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Set the base context for requests to the HammerContext
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Prevent double-login for Git HTTP and LFS and simplify login
There are a number of inconsistencies with our current methods for
logging in for git and lfs. The first is that there is a double login
process. This is particularly evident in 1.13 where there are no less
than 4 hash checks for basic authentication due to the previous
IsPasswordSet behaviour.
This duplicated code had individual inconsistencies that were not
helpful and caused confusion.
This PR does the following:
* Remove the specific login code from the git and lfs handlers except
for the lfs special bearer token
* Simplify the meaning of DisableBasicAuthentication to allow Token and
Oauth2 sign-in.
* The removal of the specific code from git and lfs means that these
both now have the same login semantics and can - if not
DisableBasicAuthentication - login from external services. Further it
allows Oauth2 token authentication as per our standard mechanisms.
* The change in the recovery handler prevents the service from
re-attempting to login - primarily because this could easily cause a
further panic and it is wasteful.
* add test
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Andrew Thornton <art27@cantab.net>
* move shutdownfns, terminatefns and hammerfns out of separate goroutines
Coalesce the shutdownfns etc into a list of functions that get run at shutdown
rather then have them run at goroutines blocked on selects.
This may help reduce the background select/poll load in certain
configurations.
* The LevelDB queues can actually wait on empty instead of polling
Slight refactor to cause leveldb queues to wait on empty instead of polling.
* Shutdown the shadow level queue once it is empty
* Remove bytefifo additional goroutine for readToChan as it can just be run in run
* Remove additional removeWorkers goroutine for workers
* Simplify the AtShutdown and AtTerminate functions and add Channel Flusher
* Add shutdown flusher to CUQ
* move persistable channel shutdown stuff to Shutdown Fn
* Ensure that UPCQ has the correct config
* handle shutdown during the flushing
* reduce risk of race between zeroBoost and addWorkers
* prevent double shutdown
Signed-off-by: Andrew Thornton <art27@cantab.net>
