* Frontpage and Heatmap CSS tweaks
- Make heatmap use primary color
- Defined secondary color shades
- Set various blue colors to CSS vars
- Misc tweaks
* remove a useless variable
* remove another useless variable
Co-authored-by: Lauris BH <lauris@nix.lv>
* Make archival asynchronous
The prime benefit being sought here is for large archives to not
clog up the rendering process and cause unsightly proxy timeouts.
As a secondary benefit, archive-in-progress is moved out of the
way into a /tmp file so that new archival requests for the same
commit will not get fulfilled based on an archive that isn't yet
finished.
This asynchronous system is fairly primitive; request comes in, we'll
spawn off a new goroutine to handle it, then we'll mark it as done.
Status requests will see if the file exists in the final location,
and report the archival as done when it exists.
Fixes#11265
* Archive links: drop initial delay to three-quarters of a second
Some, or perhaps even most, archives will not take all that long to archive.
The archive process starts as soon as the download button is initially
clicked, so in theory they could be done quite quickly. Drop the initial
delay down to three-quarters of a second to make it more responsive in the
common case of the archive being quickly created.
* archiver: restructure a little bit to facilitate testing
This introduces two sync.Cond pointers to the archiver package. If they're
non-nil when we go to process a request, we'll wait until signalled (at all)
to proceed. The tests will then create the sync.Cond so that it can signal
at-will and sanity-check the state of the queue at different phases.
The author believes that nil-checking these two sync.Cond pointers on every
archive processing will introduce minimal overhead with no impact on
maintainability.
* gofmt nit: no space around binary + operator
* services: archiver: appease golangci-lint, lock queueMutex
Locking/unlocking the queueMutex is allowed, but not required, for
Cond.Signal() and Cond.Broadcast(). The magic at play here is just a little
too much for golangci-lint, as we take the address of queueMutex and this is
mostly used in archiver.go; the variable still gets flagged as unused.
* archiver: tests: fix several timing nits
Once we've signaled a cond var, it may take some small amount of time for
the goroutines released to hit the spot we're wanting them to be at. Give
them an appropriate amount of time.
* archiver: tests: no underscore in var name, ungh
* archiver: tests: Test* is run in a separate context than TestMain
We must setup the mutex/cond variables at the beginning of any test that's
going to use it, or else these will be nil when the test is actually ran.
* archiver: tests: hopefully final tweak
Things got shuffled around such that we carefully build up and release
requests from the queue, so we can validate the state of the queue at each
step. Fix some assertions that no longer hold true as fallout.
* repo: Download: restore some semblance of previous behavior
When archival was made async, the GET endpoint was only useful if a previous
POST had initiated the download. This commit restores the previous behavior,
to an extent; we'll now submit the archive request there and return a
"202 Accepted" to indicate that it's processing if we didn't manage to
complete the request within ~2 seconds of submission.
This lets a client directly GET the archive, and gives them some indication
that they may attempt to GET it again at a later time.
* archiver: tests: simplify a bit further
We don't need to risk failure and use time.ParseDuration to get 2 *
time.Second.
else if isn't really necessary if the conditions are simple enough and lead
to the same result.
* archiver: tests: resolve potential source of flakiness
Increase all timeouts to 10 seconds; these aren't hard-coded sleeps, so
there's no guarantee we'll actually take that long. If we need longer to
not have a false-positive, then so be it.
While here, various assert.{Not,}Equal arguments are flipped around so that
the wording in error output reflects reality, where the expected argument is
second and actual third.
* archiver: setup infrastructure for notifying consumers of completion
This API will *not* allow consumers to subscribe to specific requests being
completed, just *any* request being completed. The caller is responsible for
determining if their request is satisfied and waiting again if needed.
* repo: archive: make GET endpoint synchronous again
If the request isn't complete, this endpoint will now submit the request and
wait for completion using the new API. This may still be susceptible to
timeouts for larger repos, but other endpoints now exist that the web
interface will use to negotiate its way through larger archive processes.
* archiver: tests: amend test to include WaitForCompletion()
This is a trivial one, so go ahead and include it.
* archiver: tests: fix test by calling NewContext()
The mutex is otherwise uninitialized, so we need to ensure that we're
actually initializing it if we plan to test it.
* archiver: tests: integrate new WaitForCompletion a little better
We can use this to wait for archives to come in, rather than spinning and
hoping with a timeout.
* archiver: tests: combine numQueued declaration with next-instruction assignment
* routers: repo: reap unused archiving flag from DownloadStatus()
This had some planned usage before, indicating whether this request
initiated the archival process or not. After several rounds of refactoring,
this use was deemed not necessary for much of anything and got boiled down
to !complete in all cases.
* services: archiver: restructure to use a channel
We now offer two forms of waiting for a request:
- WaitForCompletion: wait for completion with no timeout
- TimedWaitForCompletion: wait for completion with timeout
In both cases, we wait for the given request's cchan to close; in the latter
case, we do so with the caller-provided timeout. This completely removes the
need for busy-wait loops in Download/InitiateDownload, as it's fairly clean
to wait on a channel with timeout.
* services: archiver: use defer to unlock now that we can
This previously carried the lock into the goroutine, but an intermediate
step just added the request to archiveInProgress outside of the new
goroutine and removed the need for the goroutine to start out with it.
* Revert "archiver: tests: combine numQueued declaration with next-instruction assignment"
This reverts commit bcc52140238e16680f2e05e448e9be51372afdf5.
Revert "archiver: tests: integrate new WaitForCompletion a little better"
This reverts commit 9fc8bedb5667d24d3a3c7843dc28a229efffb1e6.
Revert "archiver: tests: fix test by calling NewContext()"
This reverts commit 709c35685eaaf261ebbb7d3420e3376a4ee8e7f2.
Revert "archiver: tests: amend test to include WaitForCompletion()"
This reverts commit 75261f56bc05d1fa8ff7e81dcbc0ccd93fdc9d50.
* archiver: tests: first attempt at WaitForCompletion() tests
* archiver: tests: slight improvement, less busy-loop
Just wait for the requests to complete in order, instead of busy-waiting
with a timeout. This is slightly less fragile.
While here, reverse the arguments of a nearby assert.Equal() so that
expected/actual are correct in any test output.
* archiver: address lint nits
* services: archiver: only close the channel once
* services: archiver: use a struct{} for the wait channel
This makes it obvious that the channel is only being used as a signal,
rather than anything useful being piped through it.
* archiver: tests: fix expectations
Move the close of the channel into doArchive() itself; notably, before these
goroutines move on to waiting on the Release cond.
The tests are adjusted to reflect that we can't WaitForCompletion() after
they've already completed, as WaitForCompletion() doesn't indicate that
they've been released from the queue yet.
* archiver: tests: set cchan to nil for comparison
* archiver: move ctx.Error's back into the route handlers
We shouldn't be setting this in a service, we should just be validating the
request that we were handed.
* services: archiver: use regex to match a hash
This makes sure we don't try and use refName as a hash when it's clearly not
one, e.g. heads/pull/foo.
* routers: repo: remove the weird /archive/status endpoint
We don't need to do this anymore, we can just continue POSTing to the
archive/* endpoint until we're told the download's complete. This avoids a
potential naming conflict, where a ref could start with "status/"
* archiver: tests: bump reasonable timeout to 15s
* archiver: tests: actually release timedReq
* archiver: tests: run through inFlight instead of manually checking
While we're here, add a test for manually re-processing an archive that's
already been complete. Re-open the channel and mark it incomplete, so that
doArchive can just mark it complete again.
* initArchiveLinks: prevent default behavior from clicking
* archiver: alias gitea's context, golang context import pending
* archiver: simplify logic, just reconstruct slices
While the previous logic was perhaps slightly more efficient, the
new variant's readability is much improved.
* archiver: don't block shutdown on waiting for archive
The technique established launches a goroutine to do the wait,
which will close a wait channel upon termination. For the timeout
case, we also send back a value indicating whether the timeout was
hit or not.
The timeouts are expected to be relatively small, but still a multi-
second delay to shutdown due to this could be unfortunate.
* archiver: simplify shutdown logic
We can just grab the shutdown channel from the graceful manager instead of
constructing a channel to halt the caller and/or pass a result back.
* Style issues
* Fix mis-merge
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Add Vue linting
Turns out the .vue files were not linted at all, so I added that as well
as re-indented the file to 2-space and fixed all reasonable issues that
cam up except one case of a unintended side effect for which I have no
idea how to fix it, so the rule was disabled.
* misc tweaks
* update lockfile
* use overrides to include .vue files
* treat warnings as errors on lint-frontend
* also treat stylelint warnings as errors
* use equal sign syntax
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
We did not override those yet so default `monospace` was applied. Also
added a tweak to slightly reduce font size because monospace fonts
usually render slightly larger than proportional ones.
Co-authored-by: Antoine GIRARD <sapk@users.noreply.github.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
- Change code review '+' to SVG and increase size slightly
- Set placeholder color in both themes
- Set proper font for textareas
- Fix black code in arc-green
- Various arc-green fixes
- Introduce new .code-inner class that sets the CSS attributes on
rendered code lines like view,blame and diff.
- Rename .wrap class to .word-break to reflect what it actually does
- Remove .raw which was only used on webhook page
- Set white-space: pre-wrap except on blame where it can break the
layout
Fixes: https://github.com/go-gitea/gitea/issues/13406
Some minor refactors I did while investigating another issue.
Functionalily should be pretty much the same as before.
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Fix 'add code comment' button being invisible all the time
* Fix off-center icon
* Remove old JS hover hack
* Show on full-line hover
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
- Add alpha variants for primary color
- Make timeline items solid background color
- Fix reaction styles recently regressed
- Fix diff header and make it flexbox
- Numerous smaller fixes for arc green
* Fix scrolling to resolved comment anchors
As described on discord, when the window.location.hash refers to a
resolved comment then the scroll to functionality does not work.
This PR fixes this.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Apply suggestions from code review
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Use CSS Vars for primary color
- Create 15 color shades derived from primary color
- Change blue-ish colors to use that primary color
- Move styles for scrollbars, selection from arc-green to base
- Remove obsolete arc-green styles that now use those variables
* simplify webkit scrollbar style
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
We rarely change fomantic-ui or its configuration so it's kind of a
waste to have it rebuild on every CI run. These changes remove the
fomantic files from the build and instead add the relevant output files
to the git index, which should shave of 2-3 minutes on every CI run.
`make fomantic` should still work and should be ran whenever fomantic is
updated or its configuration is changed.
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* added mastodon provider to oauth code
* changed go.mod and vendor/modules.txt to add updated goth
* vendored mastodon and new goth
* committing result of go mod tidy && go mod vendor
* added pic and mastodon to oauth models
* handled instance url
* applied lafriks suggestion
* Update web_src/js/index.js
Co-authored-by: techknowlogick <matti@mdranta.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: techknowlogick <matti@mdranta.net>
- introduce variable for border-radius value
- fix some white borders in arc-green
- add text selection and placeholder in arc-green
- tweak branch list footer
- more things I forgot
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: zeripath <art27@cantab.net>
* Start fixing Issue & PR title on mobile
Signed-off-by: kolaente <k@knt.li>
* Make sure the save & cancel buttons float right
Signed-off-by: kolaente <k@knt.li>
* Fix edit buttons and title input on mobile
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Store task errors following migrations and display them
When migrate tasks fail store the error in the task table
and ensure that they show on the status page.
Fix#13242
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update web_src/js/index.js
* Hide the failed first
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Fix arc theme label backgrounds
* Add specific style to yellow labels (background + border color)
* Remove !important from label's background rule to avoid breaking user
defined labels. Make the rule more specific to override fomantic UI
default white background
* Remove unnecesary selector
Co-authored-by: zeripath <art27@cantab.net>
- Fix various white borders
- Tweak basic button style to have more contrast
- Add more contrast to hover styles
- Invert Matrix webhook icon
May backport to 1.13.
Co-authored-by: zeripath <art27@cantab.net>
* Update outdated label to use Fomantic UI style
* Use native labels rather than custom style
* Remove leading zero
Co-authored-by: zeripath <art27@cantab.net>
* Update some JS dependencies
- Update selective dependencies that are compatible with webpack 4. We
can not upgrade to webpack 5 yet because `license-webpack-plugin` is
incompatible.
- Enable a few new eslint rules and fix new issues
* fix comment
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: zeripath <art27@cantab.net>
- Style search dropdown
- Fix radio buttons and tweak checkboxes
- Add styling for error form elements
- Make borders brighter and focus more apparent
- Adjust comment box border color to match
Fixes: https://github.com/go-gitea/gitea/pull/12491
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Use CSS Variables for fonts, remove postcss-loader
- Use CSS variables for fonts, making the fonts easier to customize
- Remove postcss-loader, it's not doing anything useful and is actually
applying strange transforms on our CSS.
Fixes: https://github.com/go-gitea/gitea/issues/11045
* introduce helper variable, mark documented vars
* work around case issue by always quoting specific fonts
* first draft
* update gitea sdk to 9e280adb4da
* adapt feat of updated sdk
* releases now works
* break the Reactions loop
* use convertGiteaLabel
* fix endless loop because paggination is not supported there !!!
* rename gitea local uploader files
* pagination can bite you in the ass
* Version Checks
* lint
* docs
* rename gitea sdk import to miss future conficts
* go-swagger: dont scan the sdk structs
* make sure gitea can shutdown gracefully
* make GetPullRequests and GetIssues similar
* rm useles
* Add Test: started ...
* ... add tests ...
* Add tests and Fixing things
* Workaround missing SHA
* Adapt: Ensure that all migration requests are cancellable
(714ab71ddc)
* LINT: fix misspells in test set
* adapt ListMergeRequestAwardEmoji
* update sdk
* Return error when creating giteadownloader failed
* update sdk
* adapt new sdk
* adopt new features
* check version before err
* adapt: 'migrate service type switch page'
* optimize
* Fix DefaultBranch
* impruve
* handle subPath
* fix test
* Fix ReviewCommentPosition
* test GetReviews
* add DefaultBranch int test set
* rm unused
* Update SDK to v0.13.0
* addopt sdk changes
* found better link
* format template
* Update Docs
* Update Gitea SDK (v0.13.1)
Add team support for review request
Block #11355
Signed-off-by: a1012112796 <1012112796@qq.com>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: Andrew Thornton <art27@cantab.net>
#11141 broke the appearance of dropzone attachments when editting
comments causing poorly updating lists.
This PR fixes this.
Fix#12583
Signed-off-by: Andrew Thornton art27@cantab.net
* CSS tweaks to warning/error segments and misc fixes
- Adjust styling for warning/error in arc-green
- Change danger boxes from orange to red
- Fix code highlight text color in arc-green
- Fix warning message in arc-green
- Fix border in org member list in arc-green
- Fix disabled checkbox text in arc-green
* use same selector in gitea theme
* fix blame highlight
Co-authored-by: zeripath <art27@cantab.net>
Make the bar-groups width 50% with max-width of 90px
Fix#12252
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
code-view class seems unecessary here as everything needed style wise comes from various diff classes. This allows comments and comment editor to be styled properly and fixes linked bug.
Fixes#13010
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Don't automatically delete repository files if they are present
Prior to this PR Gitea would delete any repository files if they are
present during creation or migration. This can in certain circumstances
lead to data-loss and is slightly unpleasant.
This PR provides a mechanism for Gitea to adopt repositories on creation
and otherwise requires an explicit flag for deletion.
PushCreate is slightly different - the create will cause adoption if
that is allowed otherwise it will delete the data if that is allowed.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix tests and migrate overwrite
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per @lunny
Only offer to adopt or overwrite if the user can do that.
Allow the site administrator to adopt or overwrite in all
circumstances
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Use setting.Repository.DefaultBranch for the default branch
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Always set setting.Repository.DefaultBranch
Signed-off-by: Andrew Thornton <art27@cantab.net>
* update swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* update templates
Signed-off-by: Andrew Thornton <art27@cantab.net>
* ensure repo closed
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Rewrite of adoption as per @6543 and @lunny
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Apply suggestions from code review
* update swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* missing not
Signed-off-by: Andrew Thornton <art27@cantab.net>
* add modals and flash reporting
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Make the unadopted page searchable
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add API
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Handle empty and non-master branched repositories
Signed-off-by: Andrew Thornton <art27@cantab.net>
* placate lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
* remove commented out code
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Disable migration items when mirror is selected
Disable migration items when mirror option is selected to make it more clear that it isn't possible to mirror anything other than code.
* allow wiki checkbox for mirrors
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Just copy it from the WIKI tool bar :)
Signed-off-by: a1012112796 <1012112796@qq.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
Blame and regular code view have diverge slightly so line highlighting wasn't working properly anymore. Make work again in lieu of a larger refactor of blame HTML to move it outside of source and into templates to match code view.
Fixes#12836
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
This is a port of gogs/gogs#4398
The only changes made by myself are:
Add locales
Add some JS to the UI
Otherwise all code credit goes to @aboron
Resolves#10829
Signed-off-by: jolheiser <john.olheiser@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
- replace two instances of fontawesome with octicons
- add new "class" optional argument to "svg" helper
- add many new CSS helpers and move their import to the end for
increaseed precedence
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Add field with isIssueWriter to front end
* Make branch field editable
* Switch frontend to form and POST from javascript
* Add /issue/id/ref endpoint to routes
* Use UpdateIssueTitle model to change ref in backend
* Removed crossreference check and adding comments on branch change
* Use ref returned from POST to update the field
* Prevent calling loadRepo from models/
* Branch/tag refreshed without page reload
* Remove filter for empty branch name
* Add clear option to tag list as well
* Delete button translation and coloring
* Fix for not showing selected branch name in new issue
* Check that branch is not being changed on a PR
* Change logic
* Notification when changing issue ref
* Fix for renamed permission parameter
* Fix for failing build
* Apply suggestions from code review
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Gitea <gitea@fake.local>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Remove duplicate logic in initListSubmits
Using the same logic to handle Choosing reviewers and assignees as
choosing label. It's the first step of #10926.
Signed-off-by: a1012112796 <1012112796@qq.com>
* fix choose block
* fix nit
* try fix bug
* simple code
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
If the user has pressed commit changes and the post has failed - do not disable
the commit changes button.
Fix#12072
Signed-off-by: Andrew Thornton <art27@cantab.net>
Turns out text ellispsis does not work in combination with flexbox and
while wrapping in a display:block can help in some cases, I could not
get this to work properly so this changes the truncate to inline-block
again and reduces the clickable area to just vertical expansion from the
links.
- Fix emoji not being replaced in issue title change text
- Make the image attributes consistent, add alt, remove align
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
- Remove overly thin font-width on counter
- Add hover effect on reaction picker
- Change colors on arc-green to green to match the theme
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
https://github.com/go-gitea/gitea/pull/12346 was using the wrong
selector which affected only the single image view. Use the correct
selector for image diffs. Removal of border-radius is still worth to
keep to override the global 3px on <img>.
Co-authored-by: Lauris BH <lauris@nix.lv>
Rendering the git graph on the server means that we can properly track flows and switch from the Canvas implementation to a SVG implementation.
* This implementation provides a 16 limited color selection
* The uniqued color numbers are also provided
* And there is also a monochrome version
*In addition is a hover highlight that allows users to highlight commits on the same flow.
Closes#12209
Signed-off-by: Andrew Thornton art27@cantab.net
Co-authored-by: silverwind <me@silverwind.io>
This makes is slightly faster to navigate through the swagger docs by
initially collapsing the tags like 'admin' or 'miscellaneous'.
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: zeripath <art27@cantab.net>
- Add loading spinners on editor and mermaid renderers
- Add error handling and inline error box for mermaid
- Fix Mermaid rendering by using the .init api
The previous method did not escape single quotes which under some
circumstances can lead to XSS vulnerabilites and the fact that it
depends on jQuery is also not ideal. Replace it with a lightweight
module.
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Move jquery-minicolors to npm/webpack
- Unvendor and add as npm dependency
- Removed unneeded backend variable
- Fixed existing bug where picker would previously initizalize to the
same green color when editing a label.
There was probably a version bump because the previous version was
over 3 years old but it seems to be compatible.
* use file-loader
* trailing comma and comment update
* misc tweaks
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Add mermaid JS renderer
For feature parity with GitLab. Tested in files, issues, wiki, editor.
arc-green only does an inversion because the renderer seems to like to
render white backgrounds on boxes.
Ref: https://github.com/go-gitea/gitea/issues/3340
Fixes: https://github.com/go-gitea/gitea/issues/12307
* add feature entry, switch to neutral theme, remove border
* add bindFunctions support
* remove unnecessary border-radius
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Reduce emoji size
Rendering should now pretty much match GitHub with 1.25em. I verified
that emojis don't increase the line height and removed unecessary size
overrides because now all emojis should appear similar in relation to
the font size.
* fix reaction hover
* Auto-init repo on license, .gitignore select
When a .gitignore or LICENSE file is added, the user is expecting the
repository to be auto-initialized. However, nothing sets the auto_init
value, so it remains at its default. We should set it to checked when
a .gitignore or LICENSE file is added, matching user expectations. If
the user clears .gitignore or LICENSE, it will leave repository creation
enabled. If the user changes the value again, it will re-check the box
if the user has since de-checked it. This behavior is at least
consistent.
Resolves: #11071
Signed-off-by: Alexander Scheel <alexander.m.scheel@gmail.com>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Update Octicons to v10
Besides a few renames, these icons are no longer present in v10 that we've
used, so had to change:
file-symlink-directory -> file-submodule
internal-repo -> repo
repo-force-push -> repo-push
repo-template-private -> repo-template
Fixes: https://github.com/go-gitea/gitea/issues/11889
Ref: https://github.com/primer/octicons/releases/tag/v10.0.0
* add custom sliders svg for removed octicon-settings
* apply suggestion
* fix triangles and use play on admin dashboard
* add custom mirror svg
* add missing build files
* unify custom svgs
* move to octicon-repo-clone to gitea-mirror
* use octicon-x on conflicts
* tweak timeline icons
* tweak comment buttons
* update settings icon to octicons v1
* switch to octicon-mirror and octicon-tools
* replace two wiki buttons with octicons
* remove whitespace in svg sources
* Fix filepath basename on Windows for SVG bindata (#12241)
* move octicons to devDependencies
* move back to dependencies
* move svgo to devDependencies again
Co-authored-by: Cirno the Strongest <1447794+CirnoT@users.noreply.github.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
- replace font-awesome icons with octicons
- clean up js and css surrounding the code expansion and file folding
- fix hover color on arc-green
- tweak diff line number colors
Co-authored-by: zeripath <art27@cantab.net>
Introduce 'make svg' which calls a node script that compiles svg files
to `public/img/svg`. These files are vendored to not create a dependency
on Node for the backend build.
On the frontend side, configure webpack using `raw-loader` so SVGs can
be imported as string.
Also moved our existing SVGs to web_src/svg for consistency.
Fixes: https://github.com/go-gitea/gitea/issues/11618
* Make copy/paste work for source code
Fix regression casued by #12047 so copy/paste works properly in all browsers.
Fixes#12184
Also while looking at this I saw a small display issue for blame view. I think #12023 was merged into original PR through an update branch before #12047 was merged and made one of the css ruules not apply anymore.
* use pseudo-element to prevent copying of comment + symbol even when not visually selected
* remove added newline here should not be necessary anymore
* make sure empty line is newline so there is something to select and copy
- Use system fonts only for text to avoid FOUT
- Move font-awesome to npm/webpack
- Move NotoColorEmoji to web_src
- Remove presumably unneccesary 'PT Sans Narrow'
- Simplify webpack import exclusions
Fixes: https://github.com/go-gitea/gitea/issues/11818
Fixes: https://github.com/go-gitea/gitea/pull/11814
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
The current vendored gitgraph.js is no longer maintained and is
difficult to understand, fix and maintain.
This PR completely rewrites its logic - hopefully in a clearer fashion
and easier to maintain.
It also includes @silverwind's improvements of coloring the commit dots
and preventing the flash of incorrect content.
Further changes to contemplate in future will be abstracting out of the
flows to an object, storing the involved commit references on the flows
etc. However, this is probably a required step for this.
Replaces #12131Fixes#11981 (part 3)
Signed-off-by: Andrew Thornton <art27@cantab.net>
Unfortunately some of the suggested changes to #12095 introduced
bugs which due to caching behaviour of sharedworkers were not caught
on simple tests.
These are as follows:
* Changing from simple for loop to use includes here:
```js
register(port) {
if (!this.clients.includes(port)) return;
this.clients.push(port);
port.postMessage({
type: 'status',
message: `registered to ${this.url}`,
});
}
```
The additional `!` prevents any clients from being added and should
read:
```js
if (this.clients.includes(port)) return;
```
* Dropping the use of jQuery `$(...)` selection and using DOM
`querySelector` here:
```js
async function receiveUpdateCount(event) {
try {
const data = JSON.parse(event.data);
const notificationCount = document.querySelector('.notification_count');
if (data.Count > 0) {
notificationCount.classList.remove('hidden');
} else {
notificationCount.classList.add('hidden');
}
notificationCount.text() = `${data.Count}`;
await updateNotificationTable();
} catch (error) {
console.error(error, event);
}
}
```
Requires that `notificationCount.text()` be changed to use `textContent`
instead.
Signed-off-by: Andrew Thornton <art27@cantab.net>
For some reason our eslint configuration is not working correctly
and a bug has become apparent when trying to backport this to 1.12.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Move EventSource to use a SharedWorker. This prevents issues with HTTP/1.1
open browser connections from preventing gitea from opening multiple tabs.
Also allow setting EVENT_SOURCE_UPDATE_TIME to disable EventSource updating
Fix#11978
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Provide option to unlink a fork
Fix#4566
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Apply suggestions from code review
Co-authored-by: techknowlogick <matti@mdranta.net>
* Add check that user can create repo
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per @cirnoT
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <matti@mdranta.net>
* Improve arc-green code colors
This should fix all previous colors that had too few contrast on the
background. I took solarized-dark as a baseline and did various
improvments. I removed bold/italic flags because I don't think they
fit and generally other tools also don't use those font flags.
* diff tweak
silverwind
Cirno the Strongest
Kyle Evans
a1012112796
zeripath
Divyam Bhasin
kolaente
Iván Valdés
6543
Spencer Taylor
John Olheiser
mrsdizzie
Victor
techknowlogick
Lunny Xiao
Vedran
Mike L
Lanre Adelowo
Alexander Scheel
George Merlocco
Lauris BH