Backport #17406.
Closes#17378
Both errors from #17378 were caused by #15175.
Problem 1 (error with added file):
`ToUTF8WithFallbackReader` creates a `MultiReader` from a `byte[2048]` and the remaining reader. `CreateReaderAndGuessDelimiter` tries to read 10000 bytes from this reader but only gets 2048 because that's the first reader in the `MultiReader`. Then the `if size < 1e4` thinks the input is at EOF and just returns that.
Problem 2 (error with changed file):
The blob reader gets defer closed. That was fine because the old version reads the whole file into memory. Now with the streaming version the close needs to defer after the method.
Co-authored-by: zeripath <art27@cantab.net>
Backport #17304
Downgrade logging statement from Fatal to Error so that errors parsing
U2FRegistration data does not panic; instead, the invalid key will be
skipped and we will attempt to parse the next one, if available.
Signed-off-by: David Jimenez <dvejmz@sgfault.com>
Co-authored-by: David Jimenez <dvejmz@users.noreply.github.com>
Backport #17035
When converting repositories from forks to normal the root NumFork needs to be
decremented too.
Fix#17026
Signed-off-by: Andrew Thornton <art27@cantab.net>
Backport #16952
PR #16125 did not update the error handlers to handle conflict errors relating
to rebases. This PR adds them.
Fix#16922
Signed-off-by: Andrew Thornton <art27@cantab.net>
Backport #16807
Calculate and return the number of Repositories on the dashboard
Organization list.
This PR restores some of the logic that was removed in #14032 to
calculate the number of repos on the dashboard orgs list.
Fix#16648
Replaces #16799
Signed-off-by: Andrew Thornton <art27@cantab.net>
* make sure headGitRepo is closed on err too
* refactor
* Fix git.Blob.DataAsync(): exec cancel since we already read all bytes (close pipe since we return a NopCloser)
Co-authored-by: zeripath <art27@cantab.net>
There are multiple places where wiki git repositories are not properly closed.
This PR ensures they are closed.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Andrew Thornton <art27@cantab.net>
* In Render tolerate not being passed a context
It is possible for RenderString to be passed to an external renderer if markdown
is set to be rendered by an external renderer. No context is currently sent to these
meaning that this will error out.
Fix#16835
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add Context to Repo calls for RenderString
All calls from routers can easily add the context - so add it.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: zeripath <art27@cantab.net>
Backport #16805Fix#16801
Even if default branch is removed from the current page, but the total branches number should be still kept. So that the pagination calculation will be correct.
Backport #16794
There is a missing return in handleSettingRemoteAddrError which means
that the error page for repo settings is duplicately rendered.
Fix#16771
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Backport #16517
The CompareAndPullRequestPost handler for POST to /compare
incorrectly handles returning errors to the user. For a start
it does not set the necessary markers to switch SimpleMDE
but it also does not immediately return to the form.
This PR fixes this by setting the appropriate values, fixing
the templates and preventing the suggestion of a too long
title.
Fix#16507
Signed-off-by: Andrew Thornton <art27@cantab.net>
Backport #16496
Unfortunately the chi changes have resulted in the CORS headers for the
git smart http protocol going missing.
This is mostly because the OPTIONS method is not being handled by
httpBase anymore.
This PR adds a GetOptions, PostOptions and Options methods to web
handler to allow OPTIONS method requests to still reach the httpBase
function.
Fix#16350Close#16491
Signed-off-by: Andrew Thornton <art27@cantab.net>
When marking notifications read the results may be returned out of order
or be delayed. This PR sends a sequence number to gitea so that the
browser can ensure that only the results of the latest notification
change are shown.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix: primary email cannot be activated
* Primary email should be activated together with user account when
'RegisterEmailConfirm' is enabled.
* To fix the existing error state. When 'RegisterEmailConfirm' is enabled, the
admin should have permission to modify the activations status of user email.
And the user should be allowed to send activation to primary email.
* Only judge whether email is primary from email_address table.
* Improve logging and refactor isEmailActive
Co-authored-by: zeripath <art27@cantab.net>
* Add option to provide signed token to verify key ownership
Currently we will only allow a key to be matched to a user if it matches
an activated email address. This PR provides a different mechanism - if
the user provides a signature for automatically generated token (based
on the timestamp, user creation time, user ID, username and primary
email.
* Ensure verified keys can act for all active emails for the user
* Add code to mark keys as verified
* Slight UI adjustments
* Slight UI adjustments 2
* Simplify signature verification slightly
* fix postgres test
* add api routes
* handle swapped primary-keys
* Verify the no-reply address for verified keys
* Only add email addresses that are activated to keys
* Fix committer shortcut properly
* Restructure gpg_keys.go
* Use common Verification Token code
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add checkbox to delete pull branch after successful merge
* Omit DeleteBranchAfterMerge field in json
* Log a warning instead of error when PR head branch deleted
* Add DefaultDeleteBranchAfterMerge to PullRequestConfig
* Add support for delete_branch_after_merge via API
* Fix for API: the branch should be deleted from the HEAD repo
If head and base repo are the same, reuse the already opened ctx.Repo.GitRepo
* Don't delegate to CleanupBranch, only reuse branch deletion code
CleanupBranch contains too much logic that has already been performed by the Merge
* Reuse gitrepo in MergePullRequest
Co-authored-by: Andrew Thornton <art27@cantab.net>
This PR adds a button to delete failed repositories if there has been a
failure during migration and for whatever reason the repository doesn't
get deleted automatically.
Fix#16154
Signed-off-by: Andrew Thornton <art27@cantab.net>
Adds a link to each blame hunk, to view the blame of an earlier version of the file, similar to GitHub. Also refactors the blame render from fmtstring based to template based.
* Fix blame bottom line and add blame prior button
* Jump to previous parent commit from the commit.
* Fix previous commit link
* Fix previous blame link
* Fix the given file not exist in the previous commit.
* Fix blameRow struct not export
* fix theming issues, rename template var
* remove unused LastCommit fetch
* fix location of blame-hunk divider
* rewrite previous commit checks
* remove duplicate commit lookup
its already resolved and stored in ctx.Repo.Commit!
* split out blamePart processing into function
Co-authored-by: rogerluo410 <rogerluo410@gmail.com>
This PR removes multiple unneeded fields from the `HookTask` struct and adds the two headers `X-Hub-Signature` and `X-Hub-Signature-256`.
## ⚠️ BREAKING ⚠️
* The `Secret` field is no longer passed as part of the payload.
* "Breaking" change (or fix?): The webhook history shows the real called url and not the url registered in the webhook (`deliver.go`@129).
Close#16115Fixes#7788Fixes#11755
Co-authored-by: zeripath <art27@cantab.net>
Now that #16069 is merged, some sites may wish to enforce that users are all public, limited or private, and/or disallow users from becoming private.
This PR adds functionality and settings to constrain a user's ability to change their visibility.
Co-authored-by: zeripath <art27@cantab.net>
You can limit or hide organisations. This pull make it also posible for users
- new strings to translte
- add checkbox to user profile form
- add checkbox to admin user.edit form
- filter explore page user search
- filter api admin and public user searches
- allow admins view "hidden" users
- add app option DEFAULT_USER_VISIBILITY
- rewrite many files to use Visibility field
- check for teams intersection
- fix context output
- right fake 404 if not visible
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Andrew Thornton <art27@cantab.net>
* More efficiently parse shas for shaPostProcessor
The shaPostProcessor currently repeatedly calls git rev-parse --verify on both backends
which is fine if there is only one thing that matches a sha - however if there are
multiple things then this becomes wildly inefficient.
This PR provides functions for both backends which are much faster to use.
Fix#16092
* Add ShaExistCache to RenderContext
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
* Add migrating message
Signed-off-by: Andrew Thornton <art27@cantab.net>
* simplify messenger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* make messenger an interface
Signed-off-by: Andrew Thornton <art27@cantab.net>
* rename
Signed-off-by: Andrew Thornton <art27@cantab.net>
* prepare for merge
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per tech
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
KN4CK3R
zeripath
Viktor Kuzmin
pricly-yellow
Lunny Xiao
6543
Meano
Jimmy Praet
luzpaz
Norwin
Sergey Dryabzhinsky
John Olheiser