I think it's a bad default to have "dev" as the default run mode which
enables debugging and now also disables HTTP caching. It's better to
just default to a value suitable for general deployments.
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* add black list and white list support for migrating repositories
* fix fmt
* fix lint
* fix vendor
* fix modules.txt
* clean diff
* specify log message
* use blocklist/allowlist
* allways use lowercase to match url
* Apply allow/block
* Settings: use existing "migrations" section
* convert domains lower case
* dont store unused value
* Block private addresses for migration by default
* fix lint
* use proposed-upstream func to detect private IP addr
* a nit
* add own error for blocked migration, add tests, imprufe api
* fix test
* fix-if-localhost-is-ipv4
* rename error & error message
* rename setting options
* Apply suggestions from code review
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* add Arch Linux
* add Arch Linux ARM
* remove Debian
There is no package in any of Debian's official repositories as of 17.11.2020 17:55 UTC.
* shrink Alpine Linux
* Update docs/content/doc/installation/from-package.en-us.md
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: techknowlogick <matti@mdranta.net>
This enabled HTTP time-based cache for storage assets, primarily
avatars. I have not observed If-Modified-Since from browsers during
tests but I guess it's good to support regardless.
It introduces a new generic httpcache module that can handle both
time-based and etag-based caching.
Additionally, manifest.json and robots.txt are now also cachable.
$header_signature could be a typed float (start with 0e and then only numbers) and a float does equal a string when comparing with typed juggle.
eg: 0e123 != "abc" does return false, but 0e123 !== "abc" returns true.
you previously could circumvent the signature check when providing a header signature in the float format (0e...)
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* docker: rootless image
* improve docs + remove check for write perm on custom
* add more info on ssh passtrough
* Add comment for internal ssh server in container config
* Fix --port setting
Unfortunately there was an error in #13195 which set the --port
option before the settings were read. This PR fixes this by
moving applying this option to after the the settings are read
However, on looking further into this code I believe that the setPort
code was slightly odd.
Firstly, it may make sense to run the install page on a different
temporary port to the full system and this should be possible with
a --install-port option.
Secondy, if the --port option is provided we should apply it to both
otherwise there will be unusual behaviour on graceful restart
Thirdly, the documentation for --port says that the setting is
temporary - it should therefore not save its result to the configuration
(This however, does mean that authorized_keys and internal links may
not be correct. - I think we need to discuss this option further.)
Fix#13277
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update cmd/web.go
* Apply suggestions from code review
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Clarify app.example.ini documentation
Hard to understand if cron i needed to activate all other cron.
* Added missing "Extended cron tasks" to config-cheat-sheet.en-us.md
cron default is false - setting it true activates all cron. Changed the documentation accordingly
* Fixed spelling
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* add sdk links to docs
* Update docs/content/doc/advanced/api-usage.en-us.md
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
Co-authored-by: Markus <git+markus@obermui.de>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
* Use CSS Variables for fonts, remove postcss-loader
- Use CSS variables for fonts, making the fonts easier to customize
- Remove postcss-loader, it's not doing anything useful and is actually
applying strange transforms on our CSS.
Fixes: https://github.com/go-gitea/gitea/issues/11045
* introduce helper variable, mark documented vars
* work around case issue by always quoting specific fonts
* Align `SSH_AUTHORIZED_KEYS_BACKUP` var with the value in `app.ini`
* Also fix the cheat sheet and move it to below - SSH_CREATE_AUTHORIZED_KEYS_FILE
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Andrew Thornton <art27@cantab.net>
* Fix images in wiki edit preview (#11546)
Make sure wiki editor sets wiki to true so gitea renders it as a wiki page.
Also change the context data attr for edit form. This looks wrong but everywhere else in our code assumes the urlPrefix to be just the repo url when rendering and manually adds /wiki to the rendered url regardless.
Fixes#11540
* Avatar support minio
* Support repo avatar minio storage
* Add missing migration
* Fix bug
* Fix test
* Add test for minio store type on avatars and repo avatars; Add documents
* Fix bug
* Fix bug
* Add back missed avatar link method
* refactor codes
* Simplify the codes
* Code improvements
* Fix lint
* Fix test mysql
* Fix test mysql
* Fix test mysql
* Fix settings
* Fix test
* fix test
* Fix bug
* first draft
* update gitea sdk to 9e280adb4da
* adapt feat of updated sdk
* releases now works
* break the Reactions loop
* use convertGiteaLabel
* fix endless loop because paggination is not supported there !!!
* rename gitea local uploader files
* pagination can bite you in the ass
* Version Checks
* lint
* docs
* rename gitea sdk import to miss future conficts
* go-swagger: dont scan the sdk structs
* make sure gitea can shutdown gracefully
* make GetPullRequests and GetIssues similar
* rm useles
* Add Test: started ...
* ... add tests ...
* Add tests and Fixing things
* Workaround missing SHA
* Adapt: Ensure that all migration requests are cancellable
(714ab71ddc)
* LINT: fix misspells in test set
* adapt ListMergeRequestAwardEmoji
* update sdk
* Return error when creating giteadownloader failed
* update sdk
* adapt new sdk
* adopt new features
* check version before err
* adapt: 'migrate service type switch page'
* optimize
* Fix DefaultBranch
* impruve
* handle subPath
* fix test
* Fix ReviewCommentPosition
* test GetReviews
* add DefaultBranch int test set
* rm unused
* Update SDK to v0.13.0
* addopt sdk changes
* found better link
* format template
* Update Docs
* Update Gitea SDK (v0.13.1)
* Add ssh certificate support
* Add ssh certificate support to builtin ssh
* Write trusted-user-ca-keys.pem based on configuration
* Update app.example.ini
* Update templates/user/settings/keys_principal.tmpl
Co-authored-by: silverwind <me@silverwind.io>
* Remove unused locale string
* Update options/locale/locale_en-US.ini
Co-authored-by: silverwind <me@silverwind.io>
* Update options/locale/locale_en-US.ini
Co-authored-by: silverwind <me@silverwind.io>
* Update models/ssh_key.go
Co-authored-by: silverwind <me@silverwind.io>
* Add missing creation of SSH.Rootpath
* Update cheatsheet, example and locale strings
* Update models/ssh_key.go
Co-authored-by: zeripath <art27@cantab.net>
* Update models/ssh_key.go
Co-authored-by: zeripath <art27@cantab.net>
* Update models/ssh_key.go
Co-authored-by: zeripath <art27@cantab.net>
* Update models/ssh_key.go
Co-authored-by: zeripath <art27@cantab.net>
* Update models/ssh_key.go
* Optimizations based on feedback
* Validate CA keys for external sshd
* Add filename option and change default filename
Add a SSH_TRUSTED_USER_CA_KEYS_FILENAME option which default is
RUN_USER/.ssh/gitea-trusted-user-ca-keys.pem
Do not write a file when SSH_TRUSTED_USER_CA_KEYS is empty.
Add some more documentation.
* Remove unneeded principalkey functions
* Add blank line
* Apply suggestions from code review
Co-authored-by: zeripath <art27@cantab.net>
* Add SSH_AUTHORIZED_PRINCIPALS_ALLOW option
This adds a SSH_AUTHORIZED_PRINCIPALS_ALLOW which is default
email,username this means that users only can add the principals
that match their email or username.
To allow anything the admin need to set the option anything.
This allows for a safe default in gitea which protects against malicious
users using other user's prinicipals. (before that user could set it).
This commit also has some small other fixes from the last code review.
* Rewrite principal keys file on user deletion
* Use correct rewrite method
* Set correct AuthorizedPrincipalsBackup default setting
* Rewrite principalsfile when adding principals
* Add update authorized_principals option to admin dashboard
* Handle non-primary emails
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add the command actually to the dashboard template
* Update models/ssh_key.go
Co-authored-by: silverwind <me@silverwind.io>
* By default do not show principal options unless there are CA keys set or they are explicitly set
Signed-off-by: Andrew Thornton <art27@cantab.net>
* allow settings when enabled
* Fix typos in TrustedUserCAKeys path
* Allow every CASignatureAlgorithms algorithm
As this depends on the content of TrustedUserCAKeys we should allow all
signature algorithms as admins can choose the specific algorithm on their
signing CA
* Update models/ssh_key.go
Co-authored-by: Lauris BH <lauris@nix.lv>
* Fix linting issue
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: techknowlogick <matti@mdranta.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Change default log configuration
This PR changes the install page and the docker default
logging configuration to match the suggested configuration
that I repeatedly end up suggesting on issues.
It further improves the logging configuration docs to
recommend specific instructions for how to configure logs
for posting to issues.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update docs/content/doc/advanced/logging-documentation.en-us.md
* Disable DSA ssh keys by default
OpenSSH has disabled DSA keys since version 7.0
As the docker runs openssh > v7.0 we should just disable
DSA keys by default.
Refers to #11417
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Just disable DSA keys by default
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Appears we need to set the minimum key sizes too
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Appears we need to set the minimum key sizes too
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Remove DSA type
* Fix Tests
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Improve Docker container name
Use a better Docker container name than the default 'server'
* Changing to gitea and use recommended v3 Docker-compose
Use `gitea` as container name. And use version 3 of the docker-compose, which should now be used: https://docs.docker.com/compose/compose-file/compose-versioning/
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Extend git hook warning in the UI.
Git hooks are a dangerous feature, administrators should be warned before giving
the git hook privilege to users.
* Disable Git hooks by default and add warning.
Git hooks are a dangerous features (see warning text) that should only
be enabled if the administrator was informed about the risk involved.
Co-authored-by: Niklas Goerke <goerke@fzi.de>
* Update comparison for GitLab CE
Fixes#13018.
* Update docs/content/doc/features/comparison.en-us.md
Co-authored-by: mrsdizzie <info@mrsdizzie.com>
* Update comparison.en-us.md
According to the linked issue it is there and just the documentation is lacking.
* Update docs/content/doc/features/comparison.en-us.md
Co-authored-by: techknowlogick <matti@mdranta.net>
* Update docs/content/doc/features/comparison.en-us.md
Co-authored-by: techknowlogick <matti@mdranta.net>
Co-authored-by: mrsdizzie <info@mrsdizzie.com>
Co-authored-by: techknowlogick <matti@mdranta.net>
* Clarification on the use of certificate chains
* As per @bagasme
Co-authored-by: Bagas Sanjaya <bagasdotme@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Bagas Sanjaya <bagasdotme@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Allow common redis and leveldb connections
Prevents multiple reopening of redis and leveldb connections to the same
place by sharing connections.
Further allows for more configurable redis connection type using the
redisURI and a leveldbURI scheme.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* add unit-test
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per @lunny
Signed-off-by: Andrew Thornton <art27@cantab.net>
* add test
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update modules/cache/cache_redis.go
* Update modules/queue/queue_disk.go
* Update modules/cache/cache_redis.go
* Update modules/cache/cache_redis.go
* Update modules/queue/unique_queue_disk.go
* Update modules/queue/queue_disk.go
* Update modules/queue/unique_queue_disk.go
* Update modules/session/redis.go
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Add configurable Trust Models
Gitea's default signature verification model differs from GitHub. GitHub
uses signatures to verify that the committer is who they say they are -
meaning that when GitHub makes a signed commit it must be the committer.
The GitHub model prevents re-publishing of commits after revocation of a
key and prevents re-signing of other people's commits to create a
completely trusted repository signed by one key or a set of trusted
keys.
The default behaviour of Gitea in contrast is to always display the
avatar and information related to a signature. This allows signatures to
be decoupled from the committer. That being said, allowing arbitary
users to present other peoples commits as theirs is not necessarily
desired therefore we have a trust model whereby signatures from
collaborators are marked trusted, signatures matching the commit line
are marked untrusted and signatures that match a user in the db but not
the committer line are marked unmatched.
The problem with this model is that this conflicts with Github therefore
we need to provide an option to allow users to choose the Github model
should they wish to.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Adjust locale strings
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per @6543
Co-authored-by: 6543 <6543@obermui.de>
* Update models/gpg_key.go
* Add migration for repository
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* libffi-dev is required for building jupyter
* matplotlib can not be installed using wheels on the used version of alpine
linux, which means it must be compiled and a large number of other packages
have to be installed as well.
This is very inefficient: see eg.
https://pythonspeed.com/articles/alpine-docker-python/
Apart from that, matplotlib is actually not required for rendering
notebook files in gitea and it will pull in other dependencies which take some
time to build (ie numpy).
Patrick Schratz
silverwind
6543
Jesse Laprade
techknowlogick
gsilvan
Cacciuc
Simon Legner
Antoine GIRARD
zeripath
Shikaku
JustAnotherArchivist
Lunny Xiao
John Olheiser
Mattias Persson
M4RKUS-11111
Amoo Hesam
ydelafollye
Johan Van de Wauw
Robin
Wim
Melroy van den Berg
Niklas Goerke
Rongjian Zhang
Divyam Bhasin
Claudius Ellsel
raoulb
PE1NUT
Tait Hoyem
Bagas Sanjaya