* Make archival asynchronous
The prime benefit being sought here is for large archives to not
clog up the rendering process and cause unsightly proxy timeouts.
As a secondary benefit, archive-in-progress is moved out of the
way into a /tmp file so that new archival requests for the same
commit will not get fulfilled based on an archive that isn't yet
finished.
This asynchronous system is fairly primitive; request comes in, we'll
spawn off a new goroutine to handle it, then we'll mark it as done.
Status requests will see if the file exists in the final location,
and report the archival as done when it exists.
Fixes#11265
* Archive links: drop initial delay to three-quarters of a second
Some, or perhaps even most, archives will not take all that long to archive.
The archive process starts as soon as the download button is initially
clicked, so in theory they could be done quite quickly. Drop the initial
delay down to three-quarters of a second to make it more responsive in the
common case of the archive being quickly created.
* archiver: restructure a little bit to facilitate testing
This introduces two sync.Cond pointers to the archiver package. If they're
non-nil when we go to process a request, we'll wait until signalled (at all)
to proceed. The tests will then create the sync.Cond so that it can signal
at-will and sanity-check the state of the queue at different phases.
The author believes that nil-checking these two sync.Cond pointers on every
archive processing will introduce minimal overhead with no impact on
maintainability.
* gofmt nit: no space around binary + operator
* services: archiver: appease golangci-lint, lock queueMutex
Locking/unlocking the queueMutex is allowed, but not required, for
Cond.Signal() and Cond.Broadcast(). The magic at play here is just a little
too much for golangci-lint, as we take the address of queueMutex and this is
mostly used in archiver.go; the variable still gets flagged as unused.
* archiver: tests: fix several timing nits
Once we've signaled a cond var, it may take some small amount of time for
the goroutines released to hit the spot we're wanting them to be at. Give
them an appropriate amount of time.
* archiver: tests: no underscore in var name, ungh
* archiver: tests: Test* is run in a separate context than TestMain
We must setup the mutex/cond variables at the beginning of any test that's
going to use it, or else these will be nil when the test is actually ran.
* archiver: tests: hopefully final tweak
Things got shuffled around such that we carefully build up and release
requests from the queue, so we can validate the state of the queue at each
step. Fix some assertions that no longer hold true as fallout.
* repo: Download: restore some semblance of previous behavior
When archival was made async, the GET endpoint was only useful if a previous
POST had initiated the download. This commit restores the previous behavior,
to an extent; we'll now submit the archive request there and return a
"202 Accepted" to indicate that it's processing if we didn't manage to
complete the request within ~2 seconds of submission.
This lets a client directly GET the archive, and gives them some indication
that they may attempt to GET it again at a later time.
* archiver: tests: simplify a bit further
We don't need to risk failure and use time.ParseDuration to get 2 *
time.Second.
else if isn't really necessary if the conditions are simple enough and lead
to the same result.
* archiver: tests: resolve potential source of flakiness
Increase all timeouts to 10 seconds; these aren't hard-coded sleeps, so
there's no guarantee we'll actually take that long. If we need longer to
not have a false-positive, then so be it.
While here, various assert.{Not,}Equal arguments are flipped around so that
the wording in error output reflects reality, where the expected argument is
second and actual third.
* archiver: setup infrastructure for notifying consumers of completion
This API will *not* allow consumers to subscribe to specific requests being
completed, just *any* request being completed. The caller is responsible for
determining if their request is satisfied and waiting again if needed.
* repo: archive: make GET endpoint synchronous again
If the request isn't complete, this endpoint will now submit the request and
wait for completion using the new API. This may still be susceptible to
timeouts for larger repos, but other endpoints now exist that the web
interface will use to negotiate its way through larger archive processes.
* archiver: tests: amend test to include WaitForCompletion()
This is a trivial one, so go ahead and include it.
* archiver: tests: fix test by calling NewContext()
The mutex is otherwise uninitialized, so we need to ensure that we're
actually initializing it if we plan to test it.
* archiver: tests: integrate new WaitForCompletion a little better
We can use this to wait for archives to come in, rather than spinning and
hoping with a timeout.
* archiver: tests: combine numQueued declaration with next-instruction assignment
* routers: repo: reap unused archiving flag from DownloadStatus()
This had some planned usage before, indicating whether this request
initiated the archival process or not. After several rounds of refactoring,
this use was deemed not necessary for much of anything and got boiled down
to !complete in all cases.
* services: archiver: restructure to use a channel
We now offer two forms of waiting for a request:
- WaitForCompletion: wait for completion with no timeout
- TimedWaitForCompletion: wait for completion with timeout
In both cases, we wait for the given request's cchan to close; in the latter
case, we do so with the caller-provided timeout. This completely removes the
need for busy-wait loops in Download/InitiateDownload, as it's fairly clean
to wait on a channel with timeout.
* services: archiver: use defer to unlock now that we can
This previously carried the lock into the goroutine, but an intermediate
step just added the request to archiveInProgress outside of the new
goroutine and removed the need for the goroutine to start out with it.
* Revert "archiver: tests: combine numQueued declaration with next-instruction assignment"
This reverts commit bcc52140238e16680f2e05e448e9be51372afdf5.
Revert "archiver: tests: integrate new WaitForCompletion a little better"
This reverts commit 9fc8bedb5667d24d3a3c7843dc28a229efffb1e6.
Revert "archiver: tests: fix test by calling NewContext()"
This reverts commit 709c35685eaaf261ebbb7d3420e3376a4ee8e7f2.
Revert "archiver: tests: amend test to include WaitForCompletion()"
This reverts commit 75261f56bc05d1fa8ff7e81dcbc0ccd93fdc9d50.
* archiver: tests: first attempt at WaitForCompletion() tests
* archiver: tests: slight improvement, less busy-loop
Just wait for the requests to complete in order, instead of busy-waiting
with a timeout. This is slightly less fragile.
While here, reverse the arguments of a nearby assert.Equal() so that
expected/actual are correct in any test output.
* archiver: address lint nits
* services: archiver: only close the channel once
* services: archiver: use a struct{} for the wait channel
This makes it obvious that the channel is only being used as a signal,
rather than anything useful being piped through it.
* archiver: tests: fix expectations
Move the close of the channel into doArchive() itself; notably, before these
goroutines move on to waiting on the Release cond.
The tests are adjusted to reflect that we can't WaitForCompletion() after
they've already completed, as WaitForCompletion() doesn't indicate that
they've been released from the queue yet.
* archiver: tests: set cchan to nil for comparison
* archiver: move ctx.Error's back into the route handlers
We shouldn't be setting this in a service, we should just be validating the
request that we were handed.
* services: archiver: use regex to match a hash
This makes sure we don't try and use refName as a hash when it's clearly not
one, e.g. heads/pull/foo.
* routers: repo: remove the weird /archive/status endpoint
We don't need to do this anymore, we can just continue POSTing to the
archive/* endpoint until we're told the download's complete. This avoids a
potential naming conflict, where a ref could start with "status/"
* archiver: tests: bump reasonable timeout to 15s
* archiver: tests: actually release timedReq
* archiver: tests: run through inFlight instead of manually checking
While we're here, add a test for manually re-processing an archive that's
already been complete. Re-open the channel and mark it incomplete, so that
doArchive can just mark it complete again.
* initArchiveLinks: prevent default behavior from clicking
* archiver: alias gitea's context, golang context import pending
* archiver: simplify logic, just reconstruct slices
While the previous logic was perhaps slightly more efficient, the
new variant's readability is much improved.
* archiver: don't block shutdown on waiting for archive
The technique established launches a goroutine to do the wait,
which will close a wait channel upon termination. For the timeout
case, we also send back a value indicating whether the timeout was
hit or not.
The timeouts are expected to be relatively small, but still a multi-
second delay to shutdown due to this could be unfortunate.
* archiver: simplify shutdown logic
We can just grab the shutdown channel from the graceful manager instead of
constructing a channel to halt the caller and/or pass a result back.
* Style issues
* Fix mis-merge
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
- Introduce new .code-inner class that sets the CSS attributes on
rendered code lines like view,blame and diff.
- Rename .wrap class to .word-break to reflect what it actually does
- Remove .raw which was only used on webhook page
- Set white-space: pre-wrap except on blame where it can break the
layout
Fixes: https://github.com/go-gitea/gitea/issues/13406
* Migrating reactions is just not that important
A failure during migrating reactions should not cause failure of
migration.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* When checking issue reactions check the correct permission
Signed-off-by: Andrew Thornton <art27@cantab.net>
* And there is another one ...
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Migrating reactions is just not that important
A failure during migrating reactions should not cause failure of
migration.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* When checking issue reactions check the correct permission
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Remove obsolete change of email on profile page
The change email on the account profile page is out-of-date
and unnecessary.
Changing email should be done using the account page.
Fix#13336
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Create function to group label comments
* Combine multiple label additions into one
* Group removed and added labels in the same comment
* Fix indentation on comments.tmpl
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: zeripath <art27@cantab.net>
* Add SendSync method
Usefull to have when you need to be confident that message was sent.
* Add sendmail command
* add checks that if either title or content is empty then error out
* Add a confirmation step
* Add --force option to bypass confirm step
* Move implementation of runSendMail to a different file
* Add copyrighting comment
* Make content optional
Print waring if it's empty or haven't been set up.
The warning will be skiped if there's a `--force` flag.
* Fix import style
Co-authored-by: 6543 <6543@obermui.de>
* Use batch when getting all users
IterateUsers uses batching by default.
Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
* Send emails one by one instead of as one chunck
Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
* Send messages concurantly
Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
* Use SendAsync+Flush instead of SendSync
Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
* Add timeout parameter to sendemail command
Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
* Fix spelling mistake
Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
* Update cmd/admin.go
Co-authored-by: 6543 <6543@obermui.de>
* Connect to a running Gitea instance
* Fix mispelling
* Add copyright comment
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Store task errors following migrations and display them
When migrate tasks fail store the error in the task table
and ensure that they show on the status page.
Fix#13242
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update web_src/js/index.js
* Hide the failed first
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* added button
* got URL params to carry through to service specific migrate pages
* do not display add mirror button if mirroring turned off
* added corrections by reviewers
* Add silverwind's suggestion
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: silverwind <me@silverwind.io>
* show author for releases created outside Gitea UI.
Also show the number of commits behind the default branch for tags created outside the UI
don't show the tag date again for tags pushed to the repo. Since it is already on the sidebar and looks like duplication
* add migration for already existing tags
* update as per review
* fix build
* add space
* fix import statments
* Update models/migrations/v113.go
Co-Authored-By: zeripath <art27@cantab.net>
* Update models/migrations/v114.go
Co-authored-by: 6543 <6543@obermui.de>
* Update services/release/release.go
Co-authored-by: 6543 <6543@obermui.de>
* impruve
* remove dependency on models package
* Close the gitrepos in a defer to ensure that they are closed.
* gofmt
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Go-version constraints ignore pre-releases.
Rather than change the library further this PR simply changes
the git version comparison to use simple version compare ignoring the
issue of pre-releases.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Unfortunately there was a mistake in #13164 which fails to handle
os.PathError wrapping an os.ErrNotExist
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* The `.Use` of storageHandler before setting up the template renderer
causes a panic if there is an error to log.
* The error passed to `ctx.Error` in that case may contain sensitive
information and should not be rendered to the end user. We should
instead log the error and render a simple error message.
* There is no handling of missing avatars and this needs a 404. Minio
errors need to be mapped to standard golang errors such as
os.ErrNotExist.
* There is no logging when storage is set up.
Related #13159
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Avatar support minio
* Support repo avatar minio storage
* Add missing migration
* Fix bug
* Fix test
* Add test for minio store type on avatars and repo avatars; Add documents
* Fix bug
* Fix bug
* Add back missed avatar link method
* refactor codes
* Simplify the codes
* Code improvements
* Fix lint
* Fix test mysql
* Fix test mysql
* Fix test mysql
* Fix settings
* Fix test
* fix test
* Fix bug
* [Enhancement] Allow admin to merge pr with protected file changes
As tilte, show protected message in diff page and merge box.
Signed-off-by: a1012112796 <1012112796@qq.com>
* remove unused ver
* Update options/locale/locale_en-US.ini
Co-authored-by: Cirno the Strongest <1447794+CirnoT@users.noreply.github.com>
* Add TrN
* Apply suggestions from code review
* fix lint
* Update options/locale/locale_en-US.ini
Co-authored-by: zeripath <art27@cantab.net>
* Apply suggestions from code review
* move pr proteced files check to TestPatch
* Call TestPatch when protected branches settings changed
* Apply review suggestion @CirnoT
* move to service @lunny
* slightly restructure routers/private/hook.go
Adds a lot of comments and simplifies the logic
Signed-off-by: Andrew Thornton <art27@cantab.net>
* placate lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
* skip duplicate protected files check
* fix check logic
* slight refactor of TestPatch
Signed-off-by: Andrew Thornton <art27@cantab.net>
* When checking for protected files changes in TestPatch use the temporary repository
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix introduced issue with hook
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Remove the check on PR index being greater than 0 as it unnecessary
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <matti@mdranta.net>
Co-authored-by: Cirno the Strongest <1447794+CirnoT@users.noreply.github.com>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
If team does not exist expect ErrTeamNotExist not ErrUserNotEXist
Fix#11336
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
Add team support for review request
Block #11355
Signed-off-by: a1012112796 <1012112796@qq.com>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: Andrew Thornton <art27@cantab.net>
Instead of a generic HTTP 500 error page, a flash message is rendered with the deploy key page template to inform the user that a key with the intended title already exists.
Fixes#13110
This PR updates golangci-lint to the latest version 1.31.0.
The upgrade introduced a new check for which I've fixed or disabled most cases.
Signed-off-by: kolaente <k@knt.li>
* Add ssh certificate support
* Add ssh certificate support to builtin ssh
* Write trusted-user-ca-keys.pem based on configuration
* Update app.example.ini
* Update templates/user/settings/keys_principal.tmpl
Co-authored-by: silverwind <me@silverwind.io>
* Remove unused locale string
* Update options/locale/locale_en-US.ini
Co-authored-by: silverwind <me@silverwind.io>
* Update options/locale/locale_en-US.ini
Co-authored-by: silverwind <me@silverwind.io>
* Update models/ssh_key.go
Co-authored-by: silverwind <me@silverwind.io>
* Add missing creation of SSH.Rootpath
* Update cheatsheet, example and locale strings
* Update models/ssh_key.go
Co-authored-by: zeripath <art27@cantab.net>
* Update models/ssh_key.go
Co-authored-by: zeripath <art27@cantab.net>
* Update models/ssh_key.go
Co-authored-by: zeripath <art27@cantab.net>
* Update models/ssh_key.go
Co-authored-by: zeripath <art27@cantab.net>
* Update models/ssh_key.go
* Optimizations based on feedback
* Validate CA keys for external sshd
* Add filename option and change default filename
Add a SSH_TRUSTED_USER_CA_KEYS_FILENAME option which default is
RUN_USER/.ssh/gitea-trusted-user-ca-keys.pem
Do not write a file when SSH_TRUSTED_USER_CA_KEYS is empty.
Add some more documentation.
* Remove unneeded principalkey functions
* Add blank line
* Apply suggestions from code review
Co-authored-by: zeripath <art27@cantab.net>
* Add SSH_AUTHORIZED_PRINCIPALS_ALLOW option
This adds a SSH_AUTHORIZED_PRINCIPALS_ALLOW which is default
email,username this means that users only can add the principals
that match their email or username.
To allow anything the admin need to set the option anything.
This allows for a safe default in gitea which protects against malicious
users using other user's prinicipals. (before that user could set it).
This commit also has some small other fixes from the last code review.
* Rewrite principal keys file on user deletion
* Use correct rewrite method
* Set correct AuthorizedPrincipalsBackup default setting
* Rewrite principalsfile when adding principals
* Add update authorized_principals option to admin dashboard
* Handle non-primary emails
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add the command actually to the dashboard template
* Update models/ssh_key.go
Co-authored-by: silverwind <me@silverwind.io>
* By default do not show principal options unless there are CA keys set or they are explicitly set
Signed-off-by: Andrew Thornton <art27@cantab.net>
* allow settings when enabled
* Fix typos in TrustedUserCAKeys path
* Allow every CASignatureAlgorithms algorithm
As this depends on the content of TrustedUserCAKeys we should allow all
signature algorithms as admins can choose the specific algorithm on their
signing CA
* Update models/ssh_key.go
Co-authored-by: Lauris BH <lauris@nix.lv>
* Fix linting issue
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: techknowlogick <matti@mdranta.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Change default log configuration
This PR changes the install page and the docker default
logging configuration to match the suggested configuration
that I repeatedly end up suggesting on issues.
It further improves the logging configuration docs to
recommend specific instructions for how to configure logs
for posting to issues.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update docs/content/doc/advanced/logging-documentation.en-us.md
* Disable DSA ssh keys by default
OpenSSH has disabled DSA keys since version 7.0
As the docker runs openssh > v7.0 we should just disable
DSA keys by default.
Refers to #11417
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Just disable DSA keys by default
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Appears we need to set the minimum key sizes too
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Appears we need to set the minimum key sizes too
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Remove DSA type
* Fix Tests
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: Lauris BH <lauris@nix.lv>
POSTing to /admin/users/:id should only set the password if the the user
IsLocal or IsOauth2
Fix#12952
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Don't automatically delete repository files if they are present
Prior to this PR Gitea would delete any repository files if they are
present during creation or migration. This can in certain circumstances
lead to data-loss and is slightly unpleasant.
This PR provides a mechanism for Gitea to adopt repositories on creation
and otherwise requires an explicit flag for deletion.
PushCreate is slightly different - the create will cause adoption if
that is allowed otherwise it will delete the data if that is allowed.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix tests and migrate overwrite
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per @lunny
Only offer to adopt or overwrite if the user can do that.
Allow the site administrator to adopt or overwrite in all
circumstances
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Use setting.Repository.DefaultBranch for the default branch
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Always set setting.Repository.DefaultBranch
Signed-off-by: Andrew Thornton <art27@cantab.net>
* update swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* update templates
Signed-off-by: Andrew Thornton <art27@cantab.net>
* ensure repo closed
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Rewrite of adoption as per @6543 and @lunny
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Apply suggestions from code review
* update swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* missing not
Signed-off-by: Andrew Thornton <art27@cantab.net>
* add modals and flash reporting
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Make the unadopted page searchable
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add API
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Handle empty and non-master branched repositories
Signed-off-by: Andrew Thornton <art27@cantab.net>
* placate lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
* remove commented out code
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Improved total count of issue when filtered.
* Fixed size of slice when selected 1 repository.
* Improved function of error check.
* improved comment
* Added parameter of return header.
Co-authored-by: 6543 <6543@obermui.de>
* Updated corresponded to the current vendored of "xorm.io/xorm".
* Dedublicated it by store the Options Struct into a variable.
* format code
* Update routers/api/v1/repo/issue.go
Co-authored-by: 6543 <6543@obermui.de>
* Update routers/api/v1/repo/issue.go
Co-authored-by: 6543 <6543@obermui.de>
* Updated number of range.
Co-authored-by: 6543 <6543@obermui.de>
* Updated number of range.
Co-authored-by: 6543 <6543@obermui.de>
* Removed total value.
* make fmt
* Improved value of sql.
Co-authored-by: zeripath <art27@cantab.net>
* Improved value of sql.
* improved message
* improved message
* improved message
* fixed message
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Fix handling of migration errors
The migration type selection screen PR did not correctly handle errors
and any user input error on the migration page would simply redirect
back to the selection page. This meant that the error would simply be
lost and the user would be none the wiser as to what happened.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* make gen-swagger
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Add configurable Trust Models
Gitea's default signature verification model differs from GitHub. GitHub
uses signatures to verify that the committer is who they say they are -
meaning that when GitHub makes a signed commit it must be the committer.
The GitHub model prevents re-publishing of commits after revocation of a
key and prevents re-signing of other people's commits to create a
completely trusted repository signed by one key or a set of trusted
keys.
The default behaviour of Gitea in contrast is to always display the
avatar and information related to a signature. This allows signatures to
be decoupled from the committer. That being said, allowing arbitary
users to present other peoples commits as theirs is not necessarily
desired therefore we have a trust model whereby signatures from
collaborators are marked trusted, signatures matching the commit line
are marked untrusted and signatures that match a user in the db but not
the committer line are marked unmatched.
The problem with this model is that this conflicts with Github therefore
we need to provide an option to allow users to choose the Github model
should they wish to.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Adjust locale strings
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per @6543
Co-authored-by: 6543 <6543@obermui.de>
* Update models/gpg_key.go
* Add migration for repository
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* move GitCommit to APIFormat convertion into convert package
* rename Commit convert functions
* move stopwatch to api convertion into convert package & rm unused code & extend test
* fix compare time
* Gitea not Gogs ;)
if check one user's unit in different repos, it's not necessary to
get user data every time.
Signed-off-by: a1012112796 <1012112796@qq.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Fix test
* Add no queue for test only
* improve code
* Auto watch whatever branch operation
* Fix lint
* Rename noqueue to immediate
* Remove old PushUpdate function
* Fix tests
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* use different structs for MigrateRepoOptions on UI and API
* Fix TokenAuth and rename UID to an understandable Name
* fix swagger doc
* simplify & mk redable
* R E F A C T O R:
migration has now internal 3 structs to store its options:
* the Options for WebUI: modules/auth/repo_form.go
* the Options for API: modules/structs/repo.go
* the option struct with after validation for internal prossessing: modules/migrations/base/options.go
* Copyright Header
* Deprecate UID - add RepoOwner
* adopt repo.go -> migrate.go
* add comment about each struct purpose
* lint
This is a port of gogs/gogs#4398
The only changes made by myself are:
Add locales
Add some JS to the UI
Otherwise all code credit goes to @aboron
Resolves#10829
Signed-off-by: jolheiser <john.olheiser@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
* Add field with isIssueWriter to front end
* Make branch field editable
* Switch frontend to form and POST from javascript
* Add /issue/id/ref endpoint to routes
* Use UpdateIssueTitle model to change ref in backend
* Removed crossreference check and adding comments on branch change
* Use ref returned from POST to update the field
* Prevent calling loadRepo from models/
* Branch/tag refreshed without page reload
* Remove filter for empty branch name
* Add clear option to tag list as well
* Delete button translation and coloring
* Fix for not showing selected branch name in new issue
* Check that branch is not being changed on a PR
* Change logic
* Notification when changing issue ref
* Fix for renamed permission parameter
* Fix for failing build
* Apply suggestions from code review
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Gitea <gitea@fake.local>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* LFS support to be stored on minio
* Fix test
* Fix lint
* Fix lint
* Fix check
* Fix test
* Update documents and add migration for LFS
* Fix some bugs
Right now we only compare the hostname from a submodule with the prefixURL it is viewed from to check if the submodule is hosted on the same Gitea instance. This adds an additional check to compare it against SSH_DOMAIN as well since the same Gitea instance might have a different hostname for SSH and if the submodule uses that hostname we should also detect that and link to the proper DOMAIN value.
Fixes#12747, #9756
* Remove duplicate logic in initListSubmits
Using the same logic to handle Choosing reviewers and assignees as
choosing label. It's the first step of #10926.
Signed-off-by: a1012112796 <1012112796@qq.com>
* fix choose block
* fix nit
* try fix bug
* simple code
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
If the user has pressed commit changes and the post has failed - do not disable
the commit changes button.
Fix#12072
Signed-off-by: Andrew Thornton <art27@cantab.net>
Set the context for CreateArchive to that of the request to ensure that archives
are only built for as long as a request is requesting them
Fix#11551
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Escape more things that are passed through str2html
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Bloody editors!
Co-authored-by: mrsdizzie <info@mrsdizzie.com>
* Update routers/user/oauth.go
Co-authored-by: mrsdizzie <info@mrsdizzie.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Add cron running API
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Apply suggestions from code review
* placate-swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* return not found
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Apply suggestions from code review
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
signing.wont_sign.%!s(<nil>) will be displayed if the repository needs signed
commits but the user is not logged in.
This is displayed because of complicated logic in the the template repo/issue/view_content/pull.tmpl
and a shortcut in the code of routers/repo/issue.go
This PR adds a default value of notsignedin if users are not signed in, which
although our templates will not show will prevent custom templates from showing
the above.
It also fixes the template to avoid showing signing errors if the user is not
authorized to sign.
Replaces #12564Close#12564
Signed-off-by: Andrew Thornton <art27@cantab.net>
* hide: 'New Project board' button
* there is no reason to show the button for users that are not signed in
* update template: specifies the condition together with another one
as per lafriks' suggestion in the comment
* chore: add proper user authorization check
* chore: also hide button if repo is archived
* chore: show project board edit/delete menu to authorized users only
* chore: drop the redundant IsSigned check
* CanWriteIssues and CanWritePulls implies (and requires) signed in user
* Add CanWriteProjects and properly assert permissions
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
#12496 demonstrated that the API merge needs to return some information as
to why a merge has been disallowed with a status code 422.
This PR ensures that a reason is always returned.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Add a storage layer for attachments
* Fix some bug
* fix test
* Fix copyright head and lint
* Fix bug
* Add setting for minio and flags for migrate-storage
* Add documents
* fix lint
* Add test for minio store type on attachments
* fix test
* fix test
* Apply suggestions from code review
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Add warning when storage migrated successfully
* Fix drone
* fix test
* rebase
* Fix test
* display the error on console
* Move minio test to amd64 since minio docker don't support arm64
* refactor the codes
* add trace
* Fix test
* remove log on xorm
* Fi download bug
* Add a storage layer for attachments
* Add setting for minio and flags for migrate-storage
* fix lint
* Add test for minio store type on attachments
* Apply suggestions from code review
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Fix drone
* fix test
* Fix test
* display the error on console
* Move minio test to amd64 since minio docker don't support arm64
* refactor the codes
* add trace
* Fix test
* Add URL function to serve attachments directly from S3/Minio
* Add ability to enable/disable redirection in attachment configuration
* Fix typo
* Add a storage layer for attachments
* Add setting for minio and flags for migrate-storage
* fix lint
* Add test for minio store type on attachments
* Apply suggestions from code review
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Fix drone
* fix test
* Fix test
* display the error on console
* Move minio test to amd64 since minio docker don't support arm64
* don't change unrelated files
* Fix lint
* Fix build
* update go.mod and go.sum
* Use github.com/minio/minio-go/v6
* Remove unused function
* Upgrade minio to v7 and some other improvements
* fix lint
* Fix go mod
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
Co-authored-by: Tyler <tystuyfzand@gmail.com>
* Fix bug preventing transfer to private organization
The code assessing whether a private organization was visible to a user before
allowing transfer was incorrect due to testing membership the wrong way round
This PR fixes this issue and renames the function performing the test to be
clearer.
Further looking at the API for transfer repository - no testing was
performed to ensure that the acting user could actually see the new
owning organization.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* change IsUserPartOfOrg everywhere
Replace all calls to os.Remove/os.RemoveAll by retrying util.Remove/util.RemoveAll and remove circular dependencies from util.
Fix#12339
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: silverwind <me@silverwind.io>
Rendering the git graph on the server means that we can properly track flows and switch from the Canvas implementation to a SVG implementation.
* This implementation provides a 16 limited color selection
* The uniqued color numbers are also provided
* And there is also a monochrome version
*In addition is a hover highlight that allows users to highlight commits on the same flow.
Closes#12209
Signed-off-by: Andrew Thornton art27@cantab.net
Co-authored-by: silverwind <me@silverwind.io>
* If Description contain more that one line render it
* simpler ...
* only render if description exists
* Fix NPE in tests
* Update routers/user/profile.go
Co-authored-by: zeripath <art27@cantab.net>
* Prevent empty div when editing comment
The template for attachments needs to remove whitespace and return empty when there are no attachments.
Fix#10220
* Don't use legacy send for messages
* Add migrations to ensure Matrix webhooks use PUT
* Set HTTP method to PUT as default
* Fix sql condition..
Signed-off-by: Till Faelligen <tfaelligen@gmail.com>
* Rename getTxnID -> getMatrixTxnID
* Use local variable instead of constant value
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Move jquery-minicolors to npm/webpack
- Unvendor and add as npm dependency
- Removed unneeded backend variable
- Fixed existing bug where picker would previously initizalize to the
same green color when editing a label.
There was probably a version bump because the previous version was
over 3 years old but it seems to be compatible.
* use file-loader
* trailing comma and comment update
* misc tweaks
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
NewTestEngine() takes a *xorm.Engine as its argument, and then immediately overwrites it.
This fixes the model package to not take an unneeded variable, and changes the routers package to not create a nil *xorm.Engine that is immediately discarded by model.
Introduce 'make svg' which calls a node script that compiles svg files
to `public/img/svg`. These files are vendored to not create a dependency
on Node for the backend build.
On the frontend side, configure webpack using `raw-loader` so SVGs can
be imported as string.
Also moved our existing SVGs to web_src/svg for consistency.
Fixes: https://github.com/go-gitea/gitea/issues/11618
* Extend notifications API and return pinned notifications in notifications list
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix swagger again
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix test
Signed-off-by: Andrew Thornton <art27@cantab.net>
* remove spurious debugs
* as per @6543
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update models/notification.go
* as per @6543
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Make LogDescriptions race safe
* Add manager commands for pausing, resuming, adding and removing loggers
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Placate lint
* Ensure that file logger is run!
* Add support for smtp and conn
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add release-and-reopen
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Remove spurious spacing between Maintenance Operations and its table on dashboard
* Prevent (EXTRA string) comments in Task headers
* Redirect tasks started from monitor page back to monitor
* Fix#12107 - redirects from process cancel should use AppSubUrl
* When wrapping queues set the name correctly
Signed-off-by: Andrew Thornton <art27@cantab.net>
Repo listings are paginated in the API now. Unfortunately, they are
ORDER BY updated_unix which only has second resolution. This means that
if you do a listing when multiple projects were created at the same time
you can unstable ordering. If that unstable ordering happens at a page
boundary you may fail to get a complete repo listing.
To make things worse sorting by updated_unix means that we may never get
a complete listing because udpated_unix can change independent of our
API calls.
Fix this by making the API repo listing order by id instead.
* Provide option to unlink a fork
Fix#4566
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Apply suggestions from code review
Co-authored-by: techknowlogick <matti@mdranta.net>
* Add check that user can create repo
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per @cirnoT
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <matti@mdranta.net>
#11716 reports multiple git blame processes hanging around
this was thought to be due to timeouts, however on closer look this
appears to be due to the Close() function of the BlameReader hanging
with a blocked stdout pipe.
This PR fixes this Close function to:
* Cancel the context of the cmd
* Close the StdoutReader - ensuring that the output pipe is closed
Further it makes the context of the `git blame` command a child of the
request context - ensuring that even if Close() is not called, on
cancellation of the Request the blame is command will also be cancelled.
Fixes#11716Closes#11727
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Server-side syntax hilighting for all code
This PR does a few things:
* Remove all traces of highlight.js
* Use chroma library to provide fast syntax hilighting directly on the server
* Provide syntax hilighting for diffs
* Re-style both unified and split diffs views
* Add custom syntax hilighting styling for both regular and arc-green
Fixes#7729Fixes#10157Fixes#11825Fixes#7728Fixes#3872Fixes#3682
And perhaps gets closer to #9553
* fix line marker
* fix repo search
* Fix single line select
* properly load settings
* npm uninstall highlight.js
* review suggestion
* code review
* forgot to call function
* fix test
* Apply suggestions from code review
suggestions from @silverwind thanks
Co-authored-by: silverwind <me@silverwind.io>
* code review
* copy/paste error
* Use const for highlight size limit
* Update web_src/less/_repository.less
Co-authored-by: Lauris BH <lauris@nix.lv>
* update size limit to 1MB and other styling tweaks
* fix highlighting for certain diff sections
* fix test
* add worker back as suggested
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Lauris BH <lauris@nix.lv>
* move Setting function into its own package
* swagger add&use new section "settings"
* move api AllowedReactions into general UI-Settings endpoint
* prepare TEST
* lint
* Add count to `GetUserRepositories` so that pagination can be supported for `/user/{username}/repos`
* Rework ListMyRepos to use models.SearchRepository
ListMyRepos was an odd one. It first fetched all user repositories and then tried to supplement them with accessible map. The end result was that:
* Limit for pagination did not work because accessible repos would always be appended
* The amount of pages was incorrect if one were to calculate it
* When paginating, all accessible repos would be shown on every page
Hopefully it should now work properly. Fixes#11800 and does not require any change on Drone-side as it can properly interpret and act on Link header which we now set.
Co-authored-by: Lauris BH <lauris@nix.lv>
* Handle more pathological branch and tag names
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix failing test
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
This removes the jQuery plugin as well as the associated config options.
Native input[type=date] does not require a language attribute as it is
localized by default, except for the placeholder attribute for which I
currently piggy-back the repo.issues.due_date_form localization option.
Implementation should pretty much match GH. Of note is that Safari does
not provide a UI for this input type, but I don't think providing one is
neccessary and GH did not bother either.
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* API allow to create closed milestones
* set CloseDate too
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Honor DEFAULT_PAGING_NUM for API
* set pagination to 10 for tests
* lint
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
A pre-receive hook that rejects pushes to refs/pull/index/head
will cause a broken PR which causes an internal server error
whenever it is viewed. This PR handles prevents the internal server
error by handling non-existent pr heads and sends a flash error
informing the creator there was a problem.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add hide activity option
This closes https://github.com/go-gitea/gitea/issues/7927
* Adjust for linter
* Adjust for linter
* Add tests
* Remove info that admins can view the activity
* Adjust new tests for linter
* Rename v139.go to v140.go
* Rename v140.go to v141.go
* properly indent
* gofmt
Co-authored-by: Jonas Lochmann <git@inkompetenz.org>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Provide diff and patch API endpoints
The diff and patch endpoints on the main routes are not accessible by token
therefore we provide new API based endpoints for these
Fix#10923
Signed-off-by: Andrew Thornton <art27@cantab.net>
* placate swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Make the response an actual string
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: Lauris BH <lauris@nix.lv>
* API: return an error when Mirrors globaly disabled
* keep it consistent with UI
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
* Allow site admin to disable mirrors
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* No need to run through Safe
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Clarify only disabling NEW mirrors
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Apply suggestions from @guillep2k
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* [FEATURE] [API] Add Endpoint for Branch Creation
Issue: https://github.com/go-gitea/gitea/issues/11376
This commit introduces an API endpoint for branch creation.
The added route is POST /repos/{owner}/{repo}/branches.
A JSON with the name of the new branch and the name of the old branch is
required as parameters.
Signed-off-by: Terence Le Huu Phuong <terence@qwasar.io>
* Put all the logic into CreateBranch and removed CreateRepoBranch
* - Added the error ErrBranchDoesNotExist in error.go
- Made the CreateNewBranch function return an errBranchDoesNotExist error
when the OldBranch does not exist
- Made the CreateBranch API function checks that the repository is not
empty and that branch exists.
* - Added a resetFixtures helper function in integration_test.go to
fine-tune test env resetting
- Added api test for CreateBranch
- Used resetFixture instead of the more general prepareTestEnv in the
repo_branch_test CreateBranch tests
* Moved the resetFixtures call inside the loop for APICreateBranch function
* Put the prepareTestEnv back in repo_branch_test
* fix import order/sort api branch test
Co-authored-by: zeripath <art27@cantab.net>
When "Must Change Password" simplify the navbar header to only show the
signout button as all other links will redirect back. This prevents the
notifications icon from showing preventing initialization of the
event-source and hence preventing redirect_to being set, however in
addition do not set the redirect_to cookie if we are looking at the
/user/events page.
Fix#11554
Signed-off-by: Andrew Thornton <art27@cantab.net>
GH has different HardBreaks behaviour for markdown comments and documents.
Comments have hard breaks and documents have soft breaks - therefore Gitea's rendering will always be different from GH's if we only provide one setting.
Here we split the setting in to two - one for documents and one for comments and other things.
Signed-off-by: Andrew Thornton art27@cantab.net
Changes to index.js as per @silverwind
Co-authored-by: silverwind <me@silverwind.io>
Changes to docs as per @guillep2k
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Move serviceworker to workbox and fix SSE interference
Instead of statically hardcoding every frontend asset, this uses a
type-based approach to cache all js,css and manifest.json requests.
This also fixes the issue that the service worker was interfering with
EventSource because it was unconditionally handling all requests which
this new implementation doesn't.
Fixes: https://github.com/go-gitea/gitea/issues/11092
Fixes: https://github.com/go-gitea/gitea/issues/7372
* rethrow error instead of logging
* await .register
* Revert "rethrow error instead of logging"
This reverts commit 043162ba1f18b98a4bf9635959fd28d16e839fc5.
* improve comment
* remove JSRenderer
* add version-based cache invalidation
* refactor
* more refactor
* remove comment
* rename item to fit cache name
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Fix repo-list private and total count bugs
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Ensure limited and private org public repos are displayed on "private"
Signed-off-by: Andrew Thornton <art27@cantab.net>
* switch from onlyPrivate to is_private
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Generate swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Ensure that we can see public repositories in private organization
Fix#10144 (Again)
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix Admin users and organizations page
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update models/repo_list.go
Co-authored-by: Lauris BH <lauris@nix.lv>
* Refactor Cron and merge dashboard tasks
* Merge Cron and Dashboard tasks
* Make every cron task report a system notice on completion
* Refactor the creation of these tasks
* Ensure that execution counts of tasks is correct
* Allow cron tasks to be started from the cron page
* golangci-lint fixes
* Enforce that only one task with the same name can be registered
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix name check
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per @guillep2k
* as per @lafriks
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add git.CommandContext variants
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Make API EditIssue and EditPullRequest issue notifications
Restructure models.UpdateIssueByAPI and EditIssue/EditPullRequest
to issue notifications
Fix#10014
Signed-off-by: Andrew Thornton <art27@cantab.net>
* As per @6543
Signed-off-by: Andrew Thornton <art27@cantab.net>
* update status!
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Add archived options to SearchRepository
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add only-private search
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add filter options and paging to dashboard repository page
Signed-off-by: Andrew Thornton <art27@cantab.net>
* swagger generate
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix-swagger-again
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per @mrsdizzie also remember state
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
Currently you can see a list of commit history for wiki pages but aren't able to view the commit diff itself. This adds the feature to view an individual commit to a wiki repo.
Closes#8999
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Properly generate ref URLs
Tags used to not generate correct URLs (src/branch/tags/1.0.0 instead of
src/tags/1.0.0).
Also cleans up some code around it with the created helper functions.
* Fix formatting and create migration
* Add copyright head to utils_test
* Use a raw query for the ref migration
* Remove semicolon
* Quote column and table names in migration SQL
* Change || to CONCAT, since MSSQL does not support ||
* Make migration engine aware
* Add missing import
* Move ref EndName and URL to the issue service
* Fix tests
* Add test for commit refs
* Update issue.go
* Use the right command for building JavaScript bundles
* Prepare for merge
* Check for refs/* before prepending in migration
* Update services/issue/issue_test.go
* Update modules/git/utils_test.go
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: techknowlogick <matti@mdranta.net>
* Switch code editor to Monaco
This switches out CodeMirror for Monaco which is based on the same code
base as VS code and should work pretty similar to it.
It does add a few async chunks, totalling around 10MB to our build. It
currently supports around 65 languages and in the default configuration,
each language would emit one ugly [number].js chunk, so I opted to
combine them all into a single file for now.
CodeMirror is still being used under the hood by SimpleMDE so it can not
be removed yet.
* inline editorconfig, fix diff, use for markdown, remove more dead code
* refactors, remove jquery usage
* use tab_width
* fix intellisense
* rename function for clarity
* misc tweaks, enable webpack progress display
* only use --progress on dev build
* remove useless borders in arc-green
* fix typo
* remove obsolete comment
* small refactor
* fix file creation and various refactors
* unset useTabStops too when no editorconfig
* small refactor
* disable webpack's [big] warnings
* remove useless await
* fix dark theme check
* rename chunk to 'monaco'
* add to .gitignore and delete webpack dest before build
* increase editor height
* support more editorconfig properties
* remove empty element filter
* rename
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
* Allow compare page to look up base, head, own-fork, forkbase-of-head
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per @guillep2k
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update routers/repo/compare.go
* as per @guillep2k
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Rationalise the names a little
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Rationalise the names a little (2)
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix 500 with fork of fork
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Prevent 500 on compare different trees
Signed-off-by: Andrew Thornton <art27@cantab.net>
* dotdotdot is perfectly valid in both usernames and repo names
Signed-off-by: Andrew Thornton <art27@cantab.net>
* ensure we can set the head and base repos too
Signed-off-by: Andrew Thornton <art27@cantab.net>
* ensure we can set the head and base repos too (2)
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
* only set headRepo == baseRepo if isSameRepo
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Correctly set the organization num repos
Correctly set the organization num repos to the number of
accessible repos for the user
Fix#11194
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per @lunny
Signed-off-by: Andrew Thornton <art27@cantab.net>
* attempt to fix mssql
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update models/user.go
* Explicit columns
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add test and fix 0 counted orgs
Signed-off-by: Andrew Thornton <art27@cantab.net>
* remove orgname from api
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Allow Git ref for /repos/{owner}/{repo}/git/commits/{sha}
* Consolidate API for getting single commit
* Fix tests and do it differently
Co-authored-by: zeripath <art27@cantab.net>
If user create pull review through api but not set CommitID,
I think it's necessary to use last headCommitID as default seting,
or this review will be considered as stale review which is wrong
Signed-off-by: a1012112796 <1012112796@qq.com>
Although default branch is not offered for deletion in the templates, we need to prevent it both at the router level and in the pre-receive hook.
Co-authored-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
* routers: make /compare route available to unauthenticated users
Remove some bits of the compare interface if the user isn't signed in.
Notably, they don't need to see the "New Pull Request" button box nor the
hidden form that would fail to submit due to the POST request continuing to
require proper privileges.
Follow-up commits will improve the UI a bit around this, removing some
"Pull Request" verbiage in favor of "Compare."
* ui: home: show "compare" button for unauthenticated users
This change requires pulling in the BaseRepo unconditionally and
recording if the pull request is in-fact not allowed
(.PullRequestCtx.Allowed). If the user isn't allowed to create a pull
request, either because this isn't a fork or same-fork branch PRs aren't
allowed, then we'll name the button "Compare" instead of "Pull Request."
* ui: branch list: use the new Compare language when available
When viewing the branch listing as an unauthenticated user, you'll get
"Pull Request" buttons. use the new "Compare" verbiage instead, which
matches GitHub behavior when you can't issue a pull request from the
branches.
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
Previously, this required authentication, but there's not actually
any privileged information on this page. Move the endpoint out of
the group that requires sign-in. It still requires the ability to
read issues and pull requests, so private repositories (for instance)
will not be exposed.
Fixes#10312Fixes#11233
* Fix creation of Org repos
Fix go-gitea#9269
* Change variable name to appease linter
* Update PR with suggestions
Add a note for user.CanCreateRepo() about failure assumptions
Change repo.create help message
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Don't allow registration via the web form, when AllowOnlyExternalRegistration is True
* Show Disabled Registration message if DisableRegistration or AllowOnlyExternalRegistration options are true
* Support unicode emojis and remove emojify.js
This PR replaces all use of emojify.js and adds unicode emoji support to various areas of gitea.
This works in a few ways:
First it adds emoji parsing support into gitea itself. This allows us to
* Render emojis from valid alias (😄)
* Detect unicode emojis and let us put them in their own class with proper aria-labels and styling
* Easily allow for custom "emoji"
* Support all emoji rendering and features without javascript
* Uses plain unicode and lets the system render in appropriate emoji font
* Doesn't leave us relying on external sources for updates/fixes/features
That same list of emoji is also used to create a json file which replaces the part of emojify.js that populates the emoji search tribute. This file is about 35KB with GZIP turned on and I've set it to load after the page renders to not hinder page load time (and this removes loading emojify.js also)
For custom "emoji" it uses a pretty simple scheme of just looking for /emojis/img/name.png where name is something a user has put in the "allowed reactions" setting we already have. The gitea reaction that was previously hard coded into a forked copy of emojify.js is included and works as a custom reaction under this method.
The emoji data sourced here is from https://github.com/github/gemoji which is the gem library Github uses for their emoji rendering (and a data source for other sites). So we should be able to easily render any emoji and :alias: that Github can, removing any errors from migrated content. They also update it as well, so we can sync when there are new unicode emoji lists released.
I've included a slimmed down and slightly modified forked copy of https://github.com/knq/emoji to make up our own emoji module. The code is pretty straight forward and again allows us to have a lot of flexibility in what happens.
I had seen a few comments about performance in some of the other threads if we render this ourselves, but there doesn't seem to be any issue here. In a test it can parse, convert, and render 1,000 emojis inside of a large markdown table in about 100ms on my laptop (which is many more emojis than will ever be in any normal issue). This also prevents any flickering and other weirdness from using javascript to render some things while using go for others.
Not included here are image fall back URLS. I don't really think they are necessary for anything new being written in 2020. However, managing the emoji ourselves would allow us to add these as a feature later on if it seems necessary.
Fixes: https://github.com/go-gitea/gitea/issues/9182
Fixes: https://github.com/go-gitea/gitea/issues/8974
Fixes: https://github.com/go-gitea/gitea/issues/8953
Fixes: https://github.com/go-gitea/gitea/issues/6628
Fixes: https://github.com/go-gitea/gitea/issues/5130
* add new shared function emojiHTML
* don't increase emoji size in issue title
* Update templates/repo/issue/view_content/add_reaction.tmpl
Co-Authored-By: 6543 <6543@obermui.de>
* Support for emoji rendering in various templates
* Render code and review comments as they should be
* Better way to handle mail subjects
* insert unicode from tribute selection
* Add template helper for plain text when needed
* Use existing replace function I forgot about
* Don't include emoji greater than Unicode Version 12
Only include emoji and aliases in JSON
* Update build/generate-emoji.go
* Tweak regex slightly to really match everything including random invisible characters. Run tests for every emoji we have
* final updates
* code review
* code review
* hard code gitea custom emoji to match previous behavior
* Update .eslintrc
Co-Authored-By: silverwind <me@silverwind.io>
* disable preempt
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Use AJAX for notifications table
Signed-off-by: Andrew Thornton <art27@cantab.net>
* move to separate js
Signed-off-by: Andrew Thornton <art27@cantab.net>
* placate golangci-lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add autoupdating notification count
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix wipeall
Signed-off-by: Andrew Thornton <art27@cantab.net>
* placate tests
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Try hidden
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Try hide and hidden
Signed-off-by: Andrew Thornton <art27@cantab.net>
* More auto-update improvements
Only run checker on pages that have a count
Change starting checker to 10s with a back-off to 60s if there is no change
Signed-off-by: Andrew Thornton <art27@cantab.net>
* string comparison!
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per @silverwind
Signed-off-by: Andrew Thornton <art27@cantab.net>
* add configurability as per @6543
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add documentation as per @6543
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Use CSRF header not query
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Further JS improvements
Fix @etzelia update notification table request
Fix @silverwind comments
Co-Authored-By: silverwind <me@silverwind.io>
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Simplify the notification count fns
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: silverwind <me@silverwind.io>
Some OAuth2 providers return quite large structured tokens >32767 bytes.
Gitea currently has a fixed maximum of 32767 bytes for these and
unfortunately due to the convoluted nature of the dependent libraries the
error returned is rather opaque.
Here we manage the error a little better - detecting the rather opaque
github.com/gorilla/securecookie.errEncodedValueTooLong and converting
it to a more readable error.
Further we provide a configurable option to increase the maximum size of
the provided OAuth2 tokens.
Fix#9907
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* use same process as in routers/repo/branch.go/deleteBranch
* make sure default branch can not be deleted
* remove IsDefaultBranch from UI process - it is worth its own pull
* permissions
* Add a way to mark Conversation (code comment) resolved
mark Conversation is a way to mark a Conversation is stale
or be solved. when it's marked as stale, will be hided like
stale. all Pull Request writer , Offical Reviewers and poster
can add or remove Conversation resolved mark.
Signed-off-by: a1012112796 <1012112796@qq.com>
* fix lint
* Apply suggestions from code review
* Add ResolveDoer
* fix ui
Co-Authored-By: Lauris BH <lauris@nix.lv>
Co-Authored-By: 6543 <6543@obermui.de>
* change IsResolved to an function
Add permission check in UpdateResolveConversation
* Apply suggestions from code review
* change return error for permisson check
* add default message for deleted user
* get issue message from comment
* add migration for ``ResolveDoerID`` column
another change:
* block mark pending review as resolved because it's not necessary
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* change button color
* resolve button size
* fix code style
* remove unusefull code
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
It is possible for misconfigured protected branches to have required status checks that are not in any of the current statuses: Pending, Success, Error, Failure, or Warning - presumably because the CI has not contacted us as yet.
Fix#10636 by adding case: missing StatusChecks when these are missing
* Cache PullRequest Divergence
* only re-calc divergence if AddTestPullRequestTask() is exec
* migrate already open pulls
* finalize
* take care of closed¬-merged+deleted-branch pull requests
* fix nil pointer exeption
Signed-off-by: 6543 <6543@obermui.de>
* try this
* no error its a warn
* init gitea-repositories-meta
* dont use gitDivergence type
* CI.restart()
* CI.restart()
* CI.restart()
* CI.restart()
* check IsUserAllowedToUpdate independend from CommitsBehind
* make sure duplicate token names cannot be used
* add check to api routes too
* add @lunny s suggestion
* fix & don't forget User.ID
* AccessTokenByNameExists() return error too
* unique token for each test
* fix lint
Signed-off-by: 6543 <6543@obermui.de>
Co-authored-by: Lanre Adelowo <yo@lanre.wtf>
Add api methods for getting and updating user oauth2 applications.
Signed-off-by: Dan Molik <dan@danmolik.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* [suggest] change merge strategy： do not check write access if user in merge white list #10935
(cherry picked from commit ba74fc6389dfcad03c273441a49b54e4d38c86ee)
* fix NPE
* Fix cross compile (#10952)
* Fix cross compile
* Add test for cross compile
* Fix drone
* Fix drone
* Also prevent CC environment not to generate
Co-authored-by: zeripath <art27@cantab.net>
* fix merge box icon color bug (#10974)
that because need some space beturn ``text`` and color defines
Signed-off-by: a1012112796 <1012112796@qq.com>
* [skip ci] Updated translations via Crowdin
* Allow X in addition to x in tasks (#10979)
Signed-off-by: Andrew Thornton <art27@cantab.net>
* remove api: merge reqRepoWriter
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: 赵智超 <1012112796@qq.com>
Co-authored-by: GiteaBot <teabot@gitea.io>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* add request review feature in pull request
add a way to notify specific reviewers to review like github , by add or delet a special type
review . The acton is is similar to Assign , so many code reuse the function and items of
Assignee, but the meaning and result is different.
The Permission style is is similar to github, that only writer can add a review request from Reviewers,
but the poster can recall and remove a review request after a reviwer has revied even if he don't have
Write Premission. only manager , the poster and reviewer of a request review can remove it.
The reviewers can be requested to review contain all readers for private repo , for public, contain
all writers and watchers.
The offical Review Request will block merge if Reject can block it.
an other change: add ui otify for Assignees.
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
Signed-off-by: a1012112796 <1012112796@qq.com>
* new change
* add placeholder string
* do some changes follow #10238 to add review requests num on lists also
change icon for review requests to eye
Co-authored-by: Lauris BH <lauris@nix.lv>
* ui: limit managers prohibit themself to login
Because I think it's crazy and not reasonale , that if a user can
prohibit themself to login. so suggest limit this choice on ui
Signed-off-by: a1012112796 <1012112796@qq.com>
* skip self Prohibit Login in post event handle
* fix comment
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* ui: add more message on sidebar menus
* add title on the menus
* show some message instead of hide choose bar when have nothing to choose
* add simply filter for each menus
* do same changes in mew_form.tmpl
* remove some unusefull comments in mew_form.tmpl
Signed-off-by: a1012112796 <1012112796@qq.com>
* do review suggestions
* add filter message on sidebar filter
* change IsIssueWriter to HasIssuesOrPullsWritePermission
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Add organization wide labels
Implement organization wide labels similar to organization wide
webhooks. This lets you create individual labels for organizations that can be used
for all repos under that organization (so being able to reuse the same
label across multiple repos).
This makes it possible for small organizations with many repos to use
labels effectively.
Fixes#7406
* Add migration
* remove comments
* fix tests
* Update options/locale/locale_en-US.ini
Removed unused translation string
* show org labels in issue search label filter
* Use more clear var name
* rename migration after merge from master
* comment typo
* update migration again after rebase with master
* check for orgID <=0 per guillep2k review
* fmt
* Apply suggestions from code review
Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com>
* remove unused code
* Make sure RepoID is 0 when searching orgID per code review
* more changes/code review requests
* More descriptive translation var per code review
* func description/delete comment when issue label deleted instead of hiding it
* remove comment
* only use issues in that repo when calculating number of open issues for org label on repo label page
* Add integration test for IssuesSearch API with labels
* remove unused function
* Update models/issue_label.go
Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Use subquery in GetLabelIDsInReposByNames
* Fix tests to use correct orgID
* fix more tests
* IssuesSearch api now uses new BuildLabelNamesIssueIDsCondition. Add a few more tests as well
* update comment for clarity
* Revert previous code change now that we can use the new BuildLabelNamesIssueIDsCondition
* Don't sort repos by date in IssuesSearch API
After much debugging I've found a strange issue where in some cases MySQL will return a different result than other enigines if a query is sorted by a null collumn. For example with our integration test data where we don't set updated_unix in repository fixtures:
SELECT `id`, `owner_id`, `owner_name`, `lower_name`, `name`, `description`, `website`, `original_service_type`, `original_url`, `default_branch`, `num_watches`, `num_stars`, `num_forks`, `num_issues`, `num_closed_issues`, `num_pulls`, `num_closed_pulls`, `num_milestones`, `num_closed_milestones`, `is_private`, `is_empty`, `is_archived`, `is_mirror`, `status`, `is_fork`, `fork_id`, `is_template`, `template_id`, `size`, `is_fsck_enabled`, `close_issues_via_commit_in_any_branch`, `topics`, `avatar`, `created_unix`, `updated_unix` FROM `repository` ORDER BY updated_unix DESC LIMIT 15 OFFSET 45
Returns different results for MySQL than other engines. However, the similar query:
SELECT `id`, `owner_id`, `owner_name`, `lower_name`, `name`, `description`, `website`, `original_service_type`, `original_url`, `default_branch`, `num_watches`, `num_stars`, `num_forks`, `num_issues`, `num_closed_issues`, `num_pulls`, `num_closed_pulls`, `num_milestones`, `num_closed_milestones`, `is_private`, `is_empty`, `is_archived`, `is_mirror`, `status`, `is_fork`, `fork_id`, `is_template`, `template_id`, `size`, `is_fsck_enabled`, `close_issues_via_commit_in_any_branch`, `topics`, `avatar`, `created_unix`, `updated_unix` FROM `repository` ORDER BY updated_unix DESC LIMIT 15 OFFSET 30
Returns the same results.
This causes integration tests to fail on MySQL in certain cases but would never show up in a real installation. Since this API call always returns issues based on the optionally provided repo_priority_id or the issueID itself, there is no change to results by changing the repo sorting method used to get ids earlier in the function.
* linter is back!
* code review
* remove now unused option
* Fix newline at end of files
* more unused code
* update to master
* check for matching ids before query
* Update models/issue_label.go
Co-Authored-By: 6543 <6543@obermui.de>
* Update models/issue_label.go
* update comments
* Update routers/org/setting.go
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
Co-authored-by: 6543 <6543@obermui.de>
* Fix broken merge base migration v128 for merged PR
* Allow PRs with deleted base branches to still show diff
* as per @lunny
Co-authored-by: Lauris BH <lauris@nix.lv>
* Fix milestones too many SQL variables bug
* Fix test
* Don't display repositories with no milestone and fix tests
* Remove unused code and add some comments
* upgrade golangci-lint to 1.24.0 to allow go 1.14 compatibility
* fix golangci-lint errors
* make make golangci-lint work when out of go-path
Signed-off-by: Andrew Thornton <art27@cantab.net>
Unfortunately there appears to be potential race with notifications
being set before the associated issue has been committed.
This PR adds protection in to the notifications list to log any failures
and remove these notifications from the display.
References #10815 - and prevents the panic but does not completely fix
this.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Use ErrKeyUnableToVerify if fail to calc fingerprint in ssh-keygen
Fix#3985
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Pass up the unable to verify
Because the assigness has been loaded in
compare.go 416:
RetrieveRepoMetas(ctx, ctx.Repo.Repository, true)
then
issue.go 381
RetrieveRepoMilestonesAndAssignees(ctx, repo)
then
issue.go 361 -- 365 , they are load assignees
So the code on compare.go 425 -- 427 is double work,
and which is the reason of #10853
Signed-off-by: a1012112796 <1012112796@qq.com>
* Add Matrix webhook
Signed-off-by: Till Faelligen <tfaelligen@gmail.com>
* Add template and related translations for Matrix hook
Signed-off-by: Till Faelligen <tfaelligen@gmail.com>
* Add actual webhook routes and form
Signed-off-by: Till Faelligen <tfaelligen@gmail.com>
* Add missing file
Signed-off-by: Till Faelligen <tfaelligen@gmail.com>
* Update modules/webhook/matrix_test.go
* Use stricter regex to replace URLs
Signed-off-by: Till Faelligen <tfaelligen@gmail.com>
* Escape url and text
Signed-off-by: Till Faelligen <tfaelligen@gmail.com>
* Remove unnecessary whitespace
* Fix copy and paste mistake
Co-Authored-By: Tulir Asokan <tulir@maunium.net>
* Fix indention inconsistency
* Use Authorization header instead of url parameter
* Add raw commit information to webhook
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: Tulir Asokan <tulir@maunium.net>
* Handle push rejections and push out-of-date in branch creation and
file upload.
* Remove the duplicated sanitize from services/pull/merge
* Move the errors Err(Merge)PushOutOfDate and ErrPushRejected to
modules/git
* Handle errors better in the upload file dialogs
Fix#10460
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
speed up page generation by making avatar lookup occur at the browser
not at page generation
* Protect against evil email address ".."
* hash the complete email address
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-Authored-By: Lauris BH <lauris@nix.lv>
* Option to set default branch at repository creation
* Handle template repos with non-default master branch
* Add DefaultBranch handling on creation to API
Fix#9542
Signed-off-by: Andrew Thornton <art27@cantab.net>
- update to latest version and move to npm
- adapt for api changes and css class rename
- add specificity to arc-green rules as dependency css now loads later
- use imports-loader to make it load correctly
- fix some wrong paths in librejs
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Fix panic in API pulls when headbranch does not exist
* refix other reference to plumbing.ErrReferenceNotFound
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Create system webhook column (and migration)
* Create system webhook DB methods
Based on the default webhook ones
* Modify router to handle system webhooks and default ones
* Remove old unused admin nav template
* Adjust orgRepoCtx to differentiate system and default webhook URLs
* Assign IsSystemWebhook when creating webhooks
* Correctly use booleans for IsSystemWebhook
* Use system webhooks when preparing webhooks for payload
* Add UI and locale changes
* Use router params to differentiate admin hook pages
* Fix deleting admin webhooks and rename method
* Add clarity to webhook docs
* Revert "Remove old unused admin nav template"
This reverts commit 191a20a7389fe5f6256b0ad6aafd04b9b0e295c5.
* Rename WebHooksNewPost to GiteaHooksNewPost for clarity
* Reintroduce blank line lost during merge conflict
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Display pull request head branch even the branch deleted or repository deleted
* Merge getHeadRepo/loadHeadRepo and getBaseRepo/loadBaseRepo on pull and fill repo when pr.Issue.Repo is available
* retrieve sha from pull head when pull request branch deleted and fix tests
* Fix test
* Ensure MustHeadRepoName returns empty string if no head repo
Co-authored-by: zeripath <art27@cantab.net>
* adding search capability to user's issues dashboard
* global issue search
* placement of search bar on issues dashboard
* fixed some bugs in the issue dashboard search
* added unit test because IssueIDs option was added to UserIssueStatsOptions
* some renaming of fields in the issue dashboard code to be more clear; also trying to fix issue of searching the right repos based on the filter
* added unit test fro GetRepoIDsForIssuesOptions; fixed search lost on pagination; using shown issue status for open/close count; removed some debugging
* fix issue with all count showing incorrectly
* removed todo comment left in by mistake
* typo pulling wrong count
* fxied all count being off when selecting repositories
* setting the opts.IsClosed after pulling repos to search, this is done so that the list of repo ids to serach for the keyword is not limited, we need to get all the issue ids for the shown issue stats
* added "accessibleRepositoryCondition" check on the query to pull the repo ids to search for issues, this is an added protection to ensure we don't search repos the user does not have access to
* added code so that in the issues search, we won't use an in clause of issues ids that goes over 1000
* fixed unit test
* using 950 as the limit for issue search, removed unneeded group by in GetRepoIDsForIssuesOptions, showing search on pulls dashboard page too (not just issues)
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* add API endpoint to create OAuth2 Application.
* move endpoint to /user. Add swagger documentations and proper response type.
* change json tags to snake_case. add CreateOAuth2ApplicationOptions to swagger docs.
* change response status to Created (201)
* add methods to list OAuth2 apps and delete an existing OAuth2 app by ID.
* add APIFormat convert method and file header
* fixed header
* hide secret on oauth2 application list
* add Created time to API response
* add API integration tests for create/list/delete OAuth2 applications.
Co-authored-by: techknowlogick <matti@mdranta.net>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Show Signer in commit lists and add basic trust
Show the avatar of the signer in the commit list pages as we do not
enforce that the signer is an author or committer. This makes it
clearer who has signed the commit.
Also display commits signed by non-members differently from
members and in particular make it clear when a non-member signer
is different from the committer to help reduce the risk of
spoofing.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* ensure orange text and background is available
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update gpg_key.go
* Update models/gpg_key.go
* Apply suggestions from code review
* Require team collaborators to have access to UnitTypeCode
* as per @6543
* fix position of sha as per @silverwind
* as per @guillep2k
* refactor
* optimize
* remove Iretating function
LoadWatchUsers do not load Users into IW object and it is used only in api ... so move this logic
* remove unessesary
* Apply suggestions from code review
Thx
Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com>
* make Tests more robust
* fix rebase
* restart CI
* CI no dont hit sqlites deadlock
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Change action GETs to POST
* submite = submit + smite
* No more # href
* Fix test
* Match other tests
* Explicit csrf
Signed-off-by: jolheiser <john.olheiser@gmail.com>
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Prevent Firefox from using apple-touch-icon
The opaque background does not work well in Firefox which uses the icon
as a "rich icon". Prevent this by not specifying it in HTML. Real Apple
devices will still request the icon on the static path.
Fixes: https://github.com/go-gitea/gitea/issues/10394
Also adjust gitignore so app.ini.sample becomes searchable and fixed a
variable name in app.ini.sample.
* fix gitignore
Move langauge detection to separate module to be more reusable
Add option to disable vendored file exclusion from file search
Allways show all language stats for search
* add API branch protection endpoint
* lint
* Change to use team names instead of ids.
* Status codes.
* fix
* Fix
* Add new branch protection options (BlockOnRejectedReviews, DismissStaleApprovals, RequireSignedCommits)
* Do xorm query directly
* fix xorm GetUserNamesByIDs
* Add some tests
* Improved GetTeamNamesByID
* http status created for CreateBranchProtection
* Correct status code in integration test
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
* Implementation for calculating language statistics
Impement saving code language statistics to database
Implement rendering langauge stats
Add primary laguage to show in repository list
Implement repository stats indexer queue
Add indexer test
Refactor to use queue module
* Do not timeout for queues
* Upgrade levelqueue to version 0.2.0
This adds functionality for Unique Queues
* Add UniqueQueue interface and functions to create them
* Add UniqueQueue implementations
* Move TestPullRequests over to use UniqueQueue
* Reduce code duplication
* Add bytefifos
* Ensure invalid types are logged
* Fix close race in PersistableChannelQueue Shutdown
* Cache last commit to accelerate the repository directory page visit
* Default use default cache configuration
* add tests for last commit cache
* Simplify last commit cache
* Revert Enabled back
* Change the last commit cache default ttl to 8760h
* Fix test
* Make WorkerPools and Queues flushable
Adds Flush methods to Queues and the WorkerPool
Further abstracts the WorkerPool
Adds a final step to Flush the queues in the defer from PrintCurrentTest
Fixes an issue with Settings inheritance in queues
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Change to for loop
* Add IsEmpty and begin just making the queues composed WorkerPools
* subsume workerpool into the queues and create a flushable interface
* Add manager command
* Move flushall to queue.Manager and add to testlogger
* As per @guillep2k
* as per @guillep2k
* Just make queues all implement flushable and clean up the wrapped queue flushes
* cope with no timeout
Co-authored-by: Lauris BH <lauris@nix.lv>
* Some refactor on git diff and ignore getting commit information failed on migrating pull request review comments
* fix test
* fix lint
* Change error log to warn
* fix commit view JS features, reimplement folding
File content folding was not working so I reimplemented it in a saner
way. Then I noticed the issue was actually because of missing JS
libraries (seen on the console of every commit with error
'SimpleMDE is not defined').
Fixed the libraries. I think the reimplementation is worth to keep.
* add .closest polyfill
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* fix pull view when head repository or head branch missed and close related pull requests when delete branch
* fix pull view broken when head repository deleted
* close pull requests when head repositories deleted
* Add tests for broken pull request head repository or branch
* fix typo
* ignore special error when close pull request
Co-authored-by: Lauris BH <lauris@nix.lv>
* Fix wrong hint when status checking is running on pull request view
* fix lint
* fix test
* fix test
* fix wrong tmpl
* fix import
* rename function name
* Add support for database schema
* Require setting search_path for the db user
* Add schema setting to admin/config.tmpl
* Use a schema different from default for psql tests
* Update postgres scripts to use custom schema
* Update to xorm/core 0.7.3 and xorm/xorm c37aff9b3a
* Fix migration test
Co-authored-by: Antoine GIRARD <sapk@users.noreply.github.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Fix wrong permissions check when issues/prs shared operations
* move redirect to the last of the function
* fix swagger
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Add possibility to global disable repo units.
* Add Default Repo Unit app.ini setting.
* Hide units
* Hide disabled repo units
* Minor fixes
* Indicate disabled units in team settings.
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
* Admin shall be able to bypass merge checks.
* Repository admin should not bypass if merge whitelist is set.
* Add code comment about checks that PR are ready
* notAllOverrideableChecksOk->notAllOverridableChecksOk
* Fix merge, require signed currently not overridable.
* fix
Co-authored-by: Antoine GIRARD <sapk@users.noreply.github.com>
* Fix push-to-create
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Check URL path and service
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Send dummy payload on receive-pack GET
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* The space was actually a NUL byte
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Use real bare repo instead of manufactured payload
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Add require signed commit for protected branch
* Fix fmt
* Make editor show if they will be signed
* bugfix
* Add basic merge check and better information for CRUD
* linting comment
* Add descriptors to merge signing
* Slight refactor
* Slight improvement to appearances
* Handle Merge API
* manage CRUD API
* Move error to error.go
* Remove fix to delete.go
* prep for merge
* need to tolerate \r\n in message
* check protected branch before trying to load it
* Apply suggestions from code review
Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com>
* fix commit-reader
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* introduce GET /notifications/new
* add TEST
* use Sprintf instead of path.Join
* Error more verbose
* return number of notifications if unreaded exist
* 200 http status for available notifications
* Restricted users (#4334): initial implementation
* Add User.IsRestricted & UI to edit it
* Pass user object instead of user id to places where IsRestricted flag matters
* Restricted users: maintain access rows for all referenced repos (incl public)
* Take logged in user & IsRestricted flag into account in org/repo listings, searches and accesses
* Add basic repo access tests for restricted users
Signed-off-by: Manush Dodunekov <manush@stendahls.se>
* Mention restricted users in the faq
Signed-off-by: Manush Dodunekov <manush@stendahls.se>
* Revert unnecessary change `.isUserPartOfOrg` -> `.IsUserPartOfOrg`
Signed-off-by: Manush Dodunekov <manush@stendahls.se>
* Remove unnecessary `org.IsOrganization()` call
Signed-off-by: Manush Dodunekov <manush@stendahls.se>
* Revert to an `int64` keyed `accessMap`
* Add type `userAccess`
* Add convenience func updateUserAccess()
* Turn accessMap into a `map[int64]userAccess`
Signed-off-by: Manush Dodunekov <manush@stendahls.se>
* or even better: `map[int64]*userAccess`
* updateUserAccess(): use tighter syntax as suggested by lafriks
* even tighter
* Avoid extra loop
* Don't disclose limited orgs to unauthenticated users
* Don't assume block only applies to orgs
* Use an array of `VisibleType` for filtering
* fix yet another thinko
* Ok - no need for u
* Revert "Ok - no need for u"
This reverts commit 5c3e886aabd5acd997a3b35687d322439732c200.
Co-authored-by: Antoine GIRARD <sapk@users.noreply.github.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
* add "before" query to ListIssueComments and ListRepoIssueComments
* Add TEST
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Antoine GIRARD <sapk@users.noreply.github.com>
* introduce `GET /orgs`
* add TEST
* show also other VisibleType's
* update description
* refactor a lot
* SearchUserOptions by default return only public
* deprecate /api/v1/org/{org}/repos in favour of /api/v1/orgs/{org}/repos + cleanup api repository routes a bit
* remove redundant code
* use upstream function for api cal
* make generate-swagger
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Antoine GIRARD <sapk@users.noreply.github.com>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
* API: orgEditTeam make Fields optional
* add TestCase
* Update integrations/api_team_test.go
* suggestions from lafriks
use len() to check if string is empty
Co-Authored-By: Lauris BH <lauris@nix.lv>
* change ...
* use Where not ID to get mssql
* add return and code format
* fix test
* fix test ... null pointer exept
* update specific colums
* only specific colums too
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Kyle Evans
silverwind
a1012112796
John Olheiser
Lunny Xiao
zeripath
Pedro Alves
M4RKUS-11111
Maxim Zhiburt
Divyam Bhasin
Paweł Bogusławski
Lanre Adelowo
Iwasa Kazmi
6543
Chris Shyi
kolaente
Wim
Rongjian Zhang
Johan Van de Wauw
ひのしば / hinoshiba
Vedran
mrsdizzie
wULLSnpAXbWZGYDYyhWTKKspEQoaYxXyhoisqHf
Gjergji Ramku
S7evinK
Lars Lehtonen
Kristian Antonsen
William Hilton
Clark Boylan
Cirno the Strongest
techknowlogick
Lauris BH
l-jonas
Terence Le Huu Phuong
guillep2k
Sijmen Schoon
Andrew Bezold
n0emis
colorfulberry
Shashvat Kedia
Dan Molik
j.yao.SUSE
James Lakin
Andreas Shimokawa
Brad Albright
Gustavo Marin
David Svantesson
John Olheiser
Andy Harrison
SpaWn2KiLl
bobemoe
Manush Dodunekov
Ryan