dendrite/syncapi/storage/sqlite3/output_room_events_table.go

477 lines
16 KiB
Go
Raw Normal View History

Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
// Copyright 2017-2018 New Vector Ltd
// Copyright 2019-2020 The Matrix.org Foundation C.I.C.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
package sqlite3
import (
"context"
"database/sql"
"encoding/json"
"sort"
"github.com/matrix-org/dendrite/internal"
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
"github.com/matrix-org/dendrite/roomserver/api"
"github.com/matrix-org/dendrite/syncapi/storage/tables"
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
"github.com/matrix-org/dendrite/syncapi/types"
"github.com/matrix-org/dendrite/internal/sqlutil"
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
"github.com/matrix-org/gomatrixserverlib"
log "github.com/sirupsen/logrus"
)
const outputRoomEventsSchema = `
-- Stores output room events received from the roomserver.
CREATE TABLE IF NOT EXISTS syncapi_output_room_events (
id INTEGER PRIMARY KEY AUTOINCREMENT,
event_id TEXT NOT NULL UNIQUE,
room_id TEXT NOT NULL,
headered_event_json TEXT NOT NULL,
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
type TEXT NOT NULL,
sender TEXT NOT NULL,
contains_url BOOL NOT NULL,
Add peer-to-peer support into Dendrite via libp2p and fetch (#880) * Use a fork of pq which supports userCurrent on wasm * Use sqlite3_js driver when running in JS * Add cmd/dendritejs to pull in sqlite3_js driver for wasm only * Update to latest go-sqlite-js version * Replace prometheus with a stub. sigh * Hard-code a config and don't use opentracing * Latest go-sqlite3-js version * Generate a key for now * Listen for fetch traffic rather than HTTP * Latest hacks for js * libp2p support * More libp2p * Fork gjson to allow us to enforce auth checks as before Previously, all events would come down redacted because the hash checks would fail. They would fail because sjson.DeleteBytes didn't remove keys not used for hashing. This didn't work because of a build tag which included a file which no-oped the index returned. See https://github.com/tidwall/gjson/issues/157 When it's resolved, let's go back to mainline. * Use gjson@1.6.0 as it fixes https://github.com/tidwall/gjson/issues/157 * Use latest gomatrixserverlib for sig checks * Fix a bug which could cause exclude_from_sync to not be set Caused when sending events over federation. * Use query variadic to make lookups actually work! * Latest gomatrixserverlib * Add notes on getting p2p up and running Partly so I don't forget myself! * refactor: Move p2p specific stuff to cmd/dendritejs This is important or else the normal build of dendrite will fail because the p2p libraries depend on syscall/js which doesn't work on normal builds. Also, clean up main.go to read a bit better. * Update ho-http-js-libp2p to return errors from RoundTrip * Add an LRU cache around the key DB We actually need this for P2P because otherwise we can *segfault* with things like: "runtime: unexpected return pc for runtime.handleEvent" where the event is a `syscall/js` event, caused by spamming sql.js caused by "Checking event signatures for 14 events of room state" which hammers the key DB repeatedly in quick succession. Using a cache fixes this, though the underlying cause is probably a bug in the version of Go I'm on (1.13.7) * breaking: Add Tracing.Enabled to toggle whether we do opentracing Defaults to false, which is why this is a breaking change. We need this flag because WASM builds cannot do opentracing. * Start adding conditional builds for wasm to handle lib/pq The general idea here is to have the wasm build have a `NewXXXDatabase` that doesn't import any postgres package and hence we never import `lib/pq`, which doesn't work under WASM (undefined `userCurrent`). * Remove lib/pq for wasm for syncapi * Add conditional building to remaining storage APIs * Update build script to set env vars correctly for dendritejs * sqlite bug fixes * Docs * Add a no-op main for dendritejs when not building under wasm * Use the real prometheus, even for WASM Instead, the dendrite-sw.js must mock out `process.pid` and `fs.stat` - which must invoke the callback with an error (e.g `EINVAL`) in order for it to work: ``` global.process = { pid: 1, }; global.fs.stat = function(path, cb) { cb({ code: "EINVAL", }); } ``` * Linting
2020-03-06 10:23:55 +00:00
add_state_ids TEXT, -- JSON encoded string array
remove_state_ids TEXT, -- JSON encoded string array
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
session_id BIGINT,
transaction_id TEXT,
Add peer-to-peer support into Dendrite via libp2p and fetch (#880) * Use a fork of pq which supports userCurrent on wasm * Use sqlite3_js driver when running in JS * Add cmd/dendritejs to pull in sqlite3_js driver for wasm only * Update to latest go-sqlite-js version * Replace prometheus with a stub. sigh * Hard-code a config and don't use opentracing * Latest go-sqlite3-js version * Generate a key for now * Listen for fetch traffic rather than HTTP * Latest hacks for js * libp2p support * More libp2p * Fork gjson to allow us to enforce auth checks as before Previously, all events would come down redacted because the hash checks would fail. They would fail because sjson.DeleteBytes didn't remove keys not used for hashing. This didn't work because of a build tag which included a file which no-oped the index returned. See https://github.com/tidwall/gjson/issues/157 When it's resolved, let's go back to mainline. * Use gjson@1.6.0 as it fixes https://github.com/tidwall/gjson/issues/157 * Use latest gomatrixserverlib for sig checks * Fix a bug which could cause exclude_from_sync to not be set Caused when sending events over federation. * Use query variadic to make lookups actually work! * Latest gomatrixserverlib * Add notes on getting p2p up and running Partly so I don't forget myself! * refactor: Move p2p specific stuff to cmd/dendritejs This is important or else the normal build of dendrite will fail because the p2p libraries depend on syscall/js which doesn't work on normal builds. Also, clean up main.go to read a bit better. * Update ho-http-js-libp2p to return errors from RoundTrip * Add an LRU cache around the key DB We actually need this for P2P because otherwise we can *segfault* with things like: "runtime: unexpected return pc for runtime.handleEvent" where the event is a `syscall/js` event, caused by spamming sql.js caused by "Checking event signatures for 14 events of room state" which hammers the key DB repeatedly in quick succession. Using a cache fixes this, though the underlying cause is probably a bug in the version of Go I'm on (1.13.7) * breaking: Add Tracing.Enabled to toggle whether we do opentracing Defaults to false, which is why this is a breaking change. We need this flag because WASM builds cannot do opentracing. * Start adding conditional builds for wasm to handle lib/pq The general idea here is to have the wasm build have a `NewXXXDatabase` that doesn't import any postgres package and hence we never import `lib/pq`, which doesn't work under WASM (undefined `userCurrent`). * Remove lib/pq for wasm for syncapi * Add conditional building to remaining storage APIs * Update build script to set env vars correctly for dendritejs * sqlite bug fixes * Docs * Add a no-op main for dendritejs when not building under wasm * Use the real prometheus, even for WASM Instead, the dendrite-sw.js must mock out `process.pid` and `fs.stat` - which must invoke the callback with an error (e.g `EINVAL`) in order for it to work: ``` global.process = { pid: 1, }; global.fs.stat = function(path, cb) { cb({ code: "EINVAL", }); } ``` * Linting
2020-03-06 10:23:55 +00:00
exclude_from_sync BOOL NOT NULL DEFAULT FALSE
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
);
`
const insertEventSQL = "" +
"INSERT INTO syncapi_output_room_events (" +
"id, room_id, event_id, headered_event_json, type, sender, contains_url, add_state_ids, remove_state_ids, session_id, transaction_id, exclude_from_sync" +
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
") VALUES ($1, $2, $3, $4, $5, $6, $7, $8, $9, $10, $11, $12) " +
Add peer-to-peer support into Dendrite via libp2p and fetch (#880) * Use a fork of pq which supports userCurrent on wasm * Use sqlite3_js driver when running in JS * Add cmd/dendritejs to pull in sqlite3_js driver for wasm only * Update to latest go-sqlite-js version * Replace prometheus with a stub. sigh * Hard-code a config and don't use opentracing * Latest go-sqlite3-js version * Generate a key for now * Listen for fetch traffic rather than HTTP * Latest hacks for js * libp2p support * More libp2p * Fork gjson to allow us to enforce auth checks as before Previously, all events would come down redacted because the hash checks would fail. They would fail because sjson.DeleteBytes didn't remove keys not used for hashing. This didn't work because of a build tag which included a file which no-oped the index returned. See https://github.com/tidwall/gjson/issues/157 When it's resolved, let's go back to mainline. * Use gjson@1.6.0 as it fixes https://github.com/tidwall/gjson/issues/157 * Use latest gomatrixserverlib for sig checks * Fix a bug which could cause exclude_from_sync to not be set Caused when sending events over federation. * Use query variadic to make lookups actually work! * Latest gomatrixserverlib * Add notes on getting p2p up and running Partly so I don't forget myself! * refactor: Move p2p specific stuff to cmd/dendritejs This is important or else the normal build of dendrite will fail because the p2p libraries depend on syscall/js which doesn't work on normal builds. Also, clean up main.go to read a bit better. * Update ho-http-js-libp2p to return errors from RoundTrip * Add an LRU cache around the key DB We actually need this for P2P because otherwise we can *segfault* with things like: "runtime: unexpected return pc for runtime.handleEvent" where the event is a `syscall/js` event, caused by spamming sql.js caused by "Checking event signatures for 14 events of room state" which hammers the key DB repeatedly in quick succession. Using a cache fixes this, though the underlying cause is probably a bug in the version of Go I'm on (1.13.7) * breaking: Add Tracing.Enabled to toggle whether we do opentracing Defaults to false, which is why this is a breaking change. We need this flag because WASM builds cannot do opentracing. * Start adding conditional builds for wasm to handle lib/pq The general idea here is to have the wasm build have a `NewXXXDatabase` that doesn't import any postgres package and hence we never import `lib/pq`, which doesn't work under WASM (undefined `userCurrent`). * Remove lib/pq for wasm for syncapi * Add conditional building to remaining storage APIs * Update build script to set env vars correctly for dendritejs * sqlite bug fixes * Docs * Add a no-op main for dendritejs when not building under wasm * Use the real prometheus, even for WASM Instead, the dendrite-sw.js must mock out `process.pid` and `fs.stat` - which must invoke the callback with an error (e.g `EINVAL`) in order for it to work: ``` global.process = { pid: 1, }; global.fs.stat = function(path, cb) { cb({ code: "EINVAL", }); } ``` * Linting
2020-03-06 10:23:55 +00:00
"ON CONFLICT (event_id) DO UPDATE SET exclude_from_sync = $13"
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
const selectEventsSQL = "" +
"SELECT id, headered_event_json, session_id, exclude_from_sync, transaction_id FROM syncapi_output_room_events WHERE event_id = $1"
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
const selectRecentEventsSQL = "" +
"SELECT id, headered_event_json, session_id, exclude_from_sync, transaction_id FROM syncapi_output_room_events" +
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
" WHERE room_id = $1 AND id > $2 AND id <= $3" +
" ORDER BY id DESC LIMIT $4"
const selectRecentEventsForSyncSQL = "" +
"SELECT id, headered_event_json, session_id, exclude_from_sync, transaction_id FROM syncapi_output_room_events" +
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
" WHERE room_id = $1 AND id > $2 AND id <= $3 AND exclude_from_sync = FALSE" +
" ORDER BY id DESC LIMIT $4"
const selectEarlyEventsSQL = "" +
"SELECT id, headered_event_json, session_id, exclude_from_sync, transaction_id FROM syncapi_output_room_events" +
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
" WHERE room_id = $1 AND id > $2 AND id <= $3" +
" ORDER BY id ASC LIMIT $4"
const selectMaxEventIDSQL = "" +
"SELECT MAX(id) FROM syncapi_output_room_events"
const updateEventJSONSQL = "" +
"UPDATE syncapi_output_room_events SET headered_event_json=$1 WHERE event_id=$2"
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
// In order for us to apply the state updates correctly, rows need to be ordered in the order they were received (id).
/*
$1 = oldPos,
$2 = newPos,
$3 = pq.StringArray(stateFilterPart.Senders),
$4 = pq.StringArray(stateFilterPart.NotSenders),
$5 = pq.StringArray(filterConvertTypeWildcardToSQL(stateFilterPart.Types)),
$6 = pq.StringArray(filterConvertTypeWildcardToSQL(stateFilterPart.NotTypes)),
$7 = stateFilterPart.ContainsURL,
$8 = stateFilterPart.Limit,
*/
const selectStateInRangeSQL = "" +
"SELECT id, headered_event_json, exclude_from_sync, add_state_ids, remove_state_ids" +
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
" FROM syncapi_output_room_events" +
" WHERE (id > $1 AND id <= $2)" + // old/new pos
" AND (add_state_ids IS NOT NULL OR remove_state_ids IS NOT NULL)" +
/* " AND ( $3 IS NULL OR sender IN ($3) )" + // sender
" AND ( $4 IS NULL OR NOT(sender IN ($4)) )" + // not sender
" AND ( $5 IS NULL OR type IN ($5) )" + // type
" AND ( $6 IS NULL OR NOT(type IN ($6)) )" + // not type
" AND ( $7 IS NULL OR contains_url = $7)" + // contains URL? */
" ORDER BY id ASC" +
" LIMIT $8" // limit
const deleteEventsForRoomSQL = "" +
"DELETE FROM syncapi_output_room_events WHERE room_id = $1"
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
type outputRoomEventsStatements struct {
db *sql.DB
2020-05-01 11:41:38 +00:00
streamIDStatements *streamIDStatements
insertEventStmt *sql.Stmt
selectEventsStmt *sql.Stmt
selectMaxEventIDStmt *sql.Stmt
selectRecentEventsStmt *sql.Stmt
selectRecentEventsForSyncStmt *sql.Stmt
selectEarlyEventsStmt *sql.Stmt
selectStateInRangeStmt *sql.Stmt
updateEventJSONStmt *sql.Stmt
deleteEventsForRoomStmt *sql.Stmt
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
}
func NewSqliteEventsTable(db *sql.DB, streamID *streamIDStatements) (tables.Events, error) {
s := &outputRoomEventsStatements{
db: db,
streamIDStatements: streamID,
}
_, err := db.Exec(outputRoomEventsSchema)
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
if err != nil {
return nil, err
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
}
if s.insertEventStmt, err = db.Prepare(insertEventSQL); err != nil {
return nil, err
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
}
if s.selectEventsStmt, err = db.Prepare(selectEventsSQL); err != nil {
return nil, err
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
}
if s.selectMaxEventIDStmt, err = db.Prepare(selectMaxEventIDSQL); err != nil {
return nil, err
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
}
if s.selectRecentEventsStmt, err = db.Prepare(selectRecentEventsSQL); err != nil {
return nil, err
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
}
if s.selectRecentEventsForSyncStmt, err = db.Prepare(selectRecentEventsForSyncSQL); err != nil {
return nil, err
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
}
if s.selectEarlyEventsStmt, err = db.Prepare(selectEarlyEventsSQL); err != nil {
return nil, err
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
}
if s.selectStateInRangeStmt, err = db.Prepare(selectStateInRangeSQL); err != nil {
return nil, err
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
}
if s.updateEventJSONStmt, err = db.Prepare(updateEventJSONSQL); err != nil {
return nil, err
}
if s.deleteEventsForRoomStmt, err = db.Prepare(deleteEventsForRoomSQL); err != nil {
return nil, err
}
return s, nil
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
}
func (s *outputRoomEventsStatements) UpdateEventJSON(ctx context.Context, event *gomatrixserverlib.HeaderedEvent) error {
headeredJSON, err := json.Marshal(event)
if err != nil {
return err
}
_, err = s.updateEventJSONStmt.ExecContext(ctx, headeredJSON, event.EventID())
return err
}
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
// selectStateInRange returns the state events between the two given PDU stream positions, exclusive of oldPos, inclusive of newPos.
// Results are bucketed based on the room ID. If the same state is overwritten multiple times between the
// two positions, only the most recent state is returned.
func (s *outputRoomEventsStatements) SelectStateInRange(
ctx context.Context, txn *sql.Tx, r types.Range,
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
stateFilterPart *gomatrixserverlib.StateFilter,
) (map[string]map[string]bool, map[string]types.StreamEvent, error) {
stmt := sqlutil.TxStmt(txn, s.selectStateInRangeStmt)
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
rows, err := stmt.QueryContext(
ctx, r.Low(), r.High(),
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
/*pq.StringArray(stateFilterPart.Senders),
pq.StringArray(stateFilterPart.NotSenders),
pq.StringArray(filterConvertTypeWildcardToSQL(stateFilterPart.Types)),
pq.StringArray(filterConvertTypeWildcardToSQL(stateFilterPart.NotTypes)),
stateFilterPart.ContainsURL,*/
stateFilterPart.Limit,
)
if err != nil {
return nil, nil, err
}
defer rows.Close() // nolint: errcheck
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
// Fetch all the state change events for all rooms between the two positions then loop each event and:
// - Keep a cache of the event by ID (99% of state change events are for the event itself)
// - For each room ID, build up an array of event IDs which represents cumulative adds/removes
// For each room, map cumulative event IDs to events and return. This may need to a batch SELECT based on event ID
// if they aren't in the event ID cache. We don't handle state deletion yet.
eventIDToEvent := make(map[string]types.StreamEvent)
// RoomID => A set (map[string]bool) of state event IDs which are between the two positions
stateNeeded := make(map[string]map[string]bool)
for rows.Next() {
var (
streamPos types.StreamPosition
eventBytes []byte
excludeFromSync bool
Add peer-to-peer support into Dendrite via libp2p and fetch (#880) * Use a fork of pq which supports userCurrent on wasm * Use sqlite3_js driver when running in JS * Add cmd/dendritejs to pull in sqlite3_js driver for wasm only * Update to latest go-sqlite-js version * Replace prometheus with a stub. sigh * Hard-code a config and don't use opentracing * Latest go-sqlite3-js version * Generate a key for now * Listen for fetch traffic rather than HTTP * Latest hacks for js * libp2p support * More libp2p * Fork gjson to allow us to enforce auth checks as before Previously, all events would come down redacted because the hash checks would fail. They would fail because sjson.DeleteBytes didn't remove keys not used for hashing. This didn't work because of a build tag which included a file which no-oped the index returned. See https://github.com/tidwall/gjson/issues/157 When it's resolved, let's go back to mainline. * Use gjson@1.6.0 as it fixes https://github.com/tidwall/gjson/issues/157 * Use latest gomatrixserverlib for sig checks * Fix a bug which could cause exclude_from_sync to not be set Caused when sending events over federation. * Use query variadic to make lookups actually work! * Latest gomatrixserverlib * Add notes on getting p2p up and running Partly so I don't forget myself! * refactor: Move p2p specific stuff to cmd/dendritejs This is important or else the normal build of dendrite will fail because the p2p libraries depend on syscall/js which doesn't work on normal builds. Also, clean up main.go to read a bit better. * Update ho-http-js-libp2p to return errors from RoundTrip * Add an LRU cache around the key DB We actually need this for P2P because otherwise we can *segfault* with things like: "runtime: unexpected return pc for runtime.handleEvent" where the event is a `syscall/js` event, caused by spamming sql.js caused by "Checking event signatures for 14 events of room state" which hammers the key DB repeatedly in quick succession. Using a cache fixes this, though the underlying cause is probably a bug in the version of Go I'm on (1.13.7) * breaking: Add Tracing.Enabled to toggle whether we do opentracing Defaults to false, which is why this is a breaking change. We need this flag because WASM builds cannot do opentracing. * Start adding conditional builds for wasm to handle lib/pq The general idea here is to have the wasm build have a `NewXXXDatabase` that doesn't import any postgres package and hence we never import `lib/pq`, which doesn't work under WASM (undefined `userCurrent`). * Remove lib/pq for wasm for syncapi * Add conditional building to remaining storage APIs * Update build script to set env vars correctly for dendritejs * sqlite bug fixes * Docs * Add a no-op main for dendritejs when not building under wasm * Use the real prometheus, even for WASM Instead, the dendrite-sw.js must mock out `process.pid` and `fs.stat` - which must invoke the callback with an error (e.g `EINVAL`) in order for it to work: ``` global.process = { pid: 1, }; global.fs.stat = function(path, cb) { cb({ code: "EINVAL", }); } ``` * Linting
2020-03-06 10:23:55 +00:00
addIDsJSON string
delIDsJSON string
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
)
Add peer-to-peer support into Dendrite via libp2p and fetch (#880) * Use a fork of pq which supports userCurrent on wasm * Use sqlite3_js driver when running in JS * Add cmd/dendritejs to pull in sqlite3_js driver for wasm only * Update to latest go-sqlite-js version * Replace prometheus with a stub. sigh * Hard-code a config and don't use opentracing * Latest go-sqlite3-js version * Generate a key for now * Listen for fetch traffic rather than HTTP * Latest hacks for js * libp2p support * More libp2p * Fork gjson to allow us to enforce auth checks as before Previously, all events would come down redacted because the hash checks would fail. They would fail because sjson.DeleteBytes didn't remove keys not used for hashing. This didn't work because of a build tag which included a file which no-oped the index returned. See https://github.com/tidwall/gjson/issues/157 When it's resolved, let's go back to mainline. * Use gjson@1.6.0 as it fixes https://github.com/tidwall/gjson/issues/157 * Use latest gomatrixserverlib for sig checks * Fix a bug which could cause exclude_from_sync to not be set Caused when sending events over federation. * Use query variadic to make lookups actually work! * Latest gomatrixserverlib * Add notes on getting p2p up and running Partly so I don't forget myself! * refactor: Move p2p specific stuff to cmd/dendritejs This is important or else the normal build of dendrite will fail because the p2p libraries depend on syscall/js which doesn't work on normal builds. Also, clean up main.go to read a bit better. * Update ho-http-js-libp2p to return errors from RoundTrip * Add an LRU cache around the key DB We actually need this for P2P because otherwise we can *segfault* with things like: "runtime: unexpected return pc for runtime.handleEvent" where the event is a `syscall/js` event, caused by spamming sql.js caused by "Checking event signatures for 14 events of room state" which hammers the key DB repeatedly in quick succession. Using a cache fixes this, though the underlying cause is probably a bug in the version of Go I'm on (1.13.7) * breaking: Add Tracing.Enabled to toggle whether we do opentracing Defaults to false, which is why this is a breaking change. We need this flag because WASM builds cannot do opentracing. * Start adding conditional builds for wasm to handle lib/pq The general idea here is to have the wasm build have a `NewXXXDatabase` that doesn't import any postgres package and hence we never import `lib/pq`, which doesn't work under WASM (undefined `userCurrent`). * Remove lib/pq for wasm for syncapi * Add conditional building to remaining storage APIs * Update build script to set env vars correctly for dendritejs * sqlite bug fixes * Docs * Add a no-op main for dendritejs when not building under wasm * Use the real prometheus, even for WASM Instead, the dendrite-sw.js must mock out `process.pid` and `fs.stat` - which must invoke the callback with an error (e.g `EINVAL`) in order for it to work: ``` global.process = { pid: 1, }; global.fs.stat = function(path, cb) { cb({ code: "EINVAL", }); } ``` * Linting
2020-03-06 10:23:55 +00:00
if err := rows.Scan(&streamPos, &eventBytes, &excludeFromSync, &addIDsJSON, &delIDsJSON); err != nil {
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
return nil, nil, err
}
Add peer-to-peer support into Dendrite via libp2p and fetch (#880) * Use a fork of pq which supports userCurrent on wasm * Use sqlite3_js driver when running in JS * Add cmd/dendritejs to pull in sqlite3_js driver for wasm only * Update to latest go-sqlite-js version * Replace prometheus with a stub. sigh * Hard-code a config and don't use opentracing * Latest go-sqlite3-js version * Generate a key for now * Listen for fetch traffic rather than HTTP * Latest hacks for js * libp2p support * More libp2p * Fork gjson to allow us to enforce auth checks as before Previously, all events would come down redacted because the hash checks would fail. They would fail because sjson.DeleteBytes didn't remove keys not used for hashing. This didn't work because of a build tag which included a file which no-oped the index returned. See https://github.com/tidwall/gjson/issues/157 When it's resolved, let's go back to mainline. * Use gjson@1.6.0 as it fixes https://github.com/tidwall/gjson/issues/157 * Use latest gomatrixserverlib for sig checks * Fix a bug which could cause exclude_from_sync to not be set Caused when sending events over federation. * Use query variadic to make lookups actually work! * Latest gomatrixserverlib * Add notes on getting p2p up and running Partly so I don't forget myself! * refactor: Move p2p specific stuff to cmd/dendritejs This is important or else the normal build of dendrite will fail because the p2p libraries depend on syscall/js which doesn't work on normal builds. Also, clean up main.go to read a bit better. * Update ho-http-js-libp2p to return errors from RoundTrip * Add an LRU cache around the key DB We actually need this for P2P because otherwise we can *segfault* with things like: "runtime: unexpected return pc for runtime.handleEvent" where the event is a `syscall/js` event, caused by spamming sql.js caused by "Checking event signatures for 14 events of room state" which hammers the key DB repeatedly in quick succession. Using a cache fixes this, though the underlying cause is probably a bug in the version of Go I'm on (1.13.7) * breaking: Add Tracing.Enabled to toggle whether we do opentracing Defaults to false, which is why this is a breaking change. We need this flag because WASM builds cannot do opentracing. * Start adding conditional builds for wasm to handle lib/pq The general idea here is to have the wasm build have a `NewXXXDatabase` that doesn't import any postgres package and hence we never import `lib/pq`, which doesn't work under WASM (undefined `userCurrent`). * Remove lib/pq for wasm for syncapi * Add conditional building to remaining storage APIs * Update build script to set env vars correctly for dendritejs * sqlite bug fixes * Docs * Add a no-op main for dendritejs when not building under wasm * Use the real prometheus, even for WASM Instead, the dendrite-sw.js must mock out `process.pid` and `fs.stat` - which must invoke the callback with an error (e.g `EINVAL`) in order for it to work: ``` global.process = { pid: 1, }; global.fs.stat = function(path, cb) { cb({ code: "EINVAL", }); } ``` * Linting
2020-03-06 10:23:55 +00:00
addIDs, delIDs, err := unmarshalStateIDs(addIDsJSON, delIDsJSON)
if err != nil {
return nil, nil, err
}
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
// Sanity check for deleted state and whine if we see it. We don't need to do anything
// since it'll just mark the event as not being needed.
if len(addIDs) < len(delIDs) {
log.WithFields(log.Fields{
"since": r.From,
"current": r.To,
Add peer-to-peer support into Dendrite via libp2p and fetch (#880) * Use a fork of pq which supports userCurrent on wasm * Use sqlite3_js driver when running in JS * Add cmd/dendritejs to pull in sqlite3_js driver for wasm only * Update to latest go-sqlite-js version * Replace prometheus with a stub. sigh * Hard-code a config and don't use opentracing * Latest go-sqlite3-js version * Generate a key for now * Listen for fetch traffic rather than HTTP * Latest hacks for js * libp2p support * More libp2p * Fork gjson to allow us to enforce auth checks as before Previously, all events would come down redacted because the hash checks would fail. They would fail because sjson.DeleteBytes didn't remove keys not used for hashing. This didn't work because of a build tag which included a file which no-oped the index returned. See https://github.com/tidwall/gjson/issues/157 When it's resolved, let's go back to mainline. * Use gjson@1.6.0 as it fixes https://github.com/tidwall/gjson/issues/157 * Use latest gomatrixserverlib for sig checks * Fix a bug which could cause exclude_from_sync to not be set Caused when sending events over federation. * Use query variadic to make lookups actually work! * Latest gomatrixserverlib * Add notes on getting p2p up and running Partly so I don't forget myself! * refactor: Move p2p specific stuff to cmd/dendritejs This is important or else the normal build of dendrite will fail because the p2p libraries depend on syscall/js which doesn't work on normal builds. Also, clean up main.go to read a bit better. * Update ho-http-js-libp2p to return errors from RoundTrip * Add an LRU cache around the key DB We actually need this for P2P because otherwise we can *segfault* with things like: "runtime: unexpected return pc for runtime.handleEvent" where the event is a `syscall/js` event, caused by spamming sql.js caused by "Checking event signatures for 14 events of room state" which hammers the key DB repeatedly in quick succession. Using a cache fixes this, though the underlying cause is probably a bug in the version of Go I'm on (1.13.7) * breaking: Add Tracing.Enabled to toggle whether we do opentracing Defaults to false, which is why this is a breaking change. We need this flag because WASM builds cannot do opentracing. * Start adding conditional builds for wasm to handle lib/pq The general idea here is to have the wasm build have a `NewXXXDatabase` that doesn't import any postgres package and hence we never import `lib/pq`, which doesn't work under WASM (undefined `userCurrent`). * Remove lib/pq for wasm for syncapi * Add conditional building to remaining storage APIs * Update build script to set env vars correctly for dendritejs * sqlite bug fixes * Docs * Add a no-op main for dendritejs when not building under wasm * Use the real prometheus, even for WASM Instead, the dendrite-sw.js must mock out `process.pid` and `fs.stat` - which must invoke the callback with an error (e.g `EINVAL`) in order for it to work: ``` global.process = { pid: 1, }; global.fs.stat = function(path, cb) { cb({ code: "EINVAL", }); } ``` * Linting
2020-03-06 10:23:55 +00:00
"adds": addIDsJSON,
"dels": delIDsJSON,
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
}).Warn("StateBetween: ignoring deleted state")
}
// TODO: Handle redacted events
var ev gomatrixserverlib.HeaderedEvent
if err := json.Unmarshal(eventBytes, &ev); err != nil {
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
return nil, nil, err
}
needSet := stateNeeded[ev.RoomID()]
if needSet == nil { // make set if required
needSet = make(map[string]bool)
}
for _, id := range delIDs {
needSet[id] = false
}
for _, id := range addIDs {
needSet[id] = true
}
stateNeeded[ev.RoomID()] = needSet
eventIDToEvent[ev.EventID()] = types.StreamEvent{
HeaderedEvent: ev,
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
StreamPosition: streamPos,
ExcludeFromSync: excludeFromSync,
}
}
return stateNeeded, eventIDToEvent, nil
}
// MaxID returns the ID of the last inserted event in this table. 'txn' is optional. If it is not supplied,
// then this function should only ever be used at startup, as it will race with inserting events if it is
// done afterwards. If there are no inserted events, 0 is returned.
func (s *outputRoomEventsStatements) SelectMaxEventID(
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
ctx context.Context, txn *sql.Tx,
) (id int64, err error) {
var nullableID sql.NullInt64
stmt := sqlutil.TxStmt(txn, s.selectMaxEventIDStmt)
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
err = stmt.QueryRowContext(ctx).Scan(&nullableID)
if nullableID.Valid {
id = nullableID.Int64
}
return
}
// InsertEvent into the output_room_events table. addState and removeState are an optional list of state event IDs. Returns the position
// of the inserted event.
func (s *outputRoomEventsStatements) InsertEvent(
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
ctx context.Context, txn *sql.Tx,
event *gomatrixserverlib.HeaderedEvent, addState, removeState []string,
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
transactionID *api.TransactionID, excludeFromSync bool,
) (types.StreamPosition, error) {
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
var txnID *string
var sessionID *int64
if transactionID != nil {
sessionID = &transactionID.SessionID
txnID = &transactionID.TransactionID
}
// Parse content as JSON and search for an "url" key
containsURL := false
var content map[string]interface{}
if json.Unmarshal(event.Content(), &content) != nil {
// Set containsURL to true if url is present
_, containsURL = content["url"]
}
var headeredJSON []byte
headeredJSON, err := json.Marshal(event)
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
if err != nil {
return 0, err
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
}
Add peer-to-peer support into Dendrite via libp2p and fetch (#880) * Use a fork of pq which supports userCurrent on wasm * Use sqlite3_js driver when running in JS * Add cmd/dendritejs to pull in sqlite3_js driver for wasm only * Update to latest go-sqlite-js version * Replace prometheus with a stub. sigh * Hard-code a config and don't use opentracing * Latest go-sqlite3-js version * Generate a key for now * Listen for fetch traffic rather than HTTP * Latest hacks for js * libp2p support * More libp2p * Fork gjson to allow us to enforce auth checks as before Previously, all events would come down redacted because the hash checks would fail. They would fail because sjson.DeleteBytes didn't remove keys not used for hashing. This didn't work because of a build tag which included a file which no-oped the index returned. See https://github.com/tidwall/gjson/issues/157 When it's resolved, let's go back to mainline. * Use gjson@1.6.0 as it fixes https://github.com/tidwall/gjson/issues/157 * Use latest gomatrixserverlib for sig checks * Fix a bug which could cause exclude_from_sync to not be set Caused when sending events over federation. * Use query variadic to make lookups actually work! * Latest gomatrixserverlib * Add notes on getting p2p up and running Partly so I don't forget myself! * refactor: Move p2p specific stuff to cmd/dendritejs This is important or else the normal build of dendrite will fail because the p2p libraries depend on syscall/js which doesn't work on normal builds. Also, clean up main.go to read a bit better. * Update ho-http-js-libp2p to return errors from RoundTrip * Add an LRU cache around the key DB We actually need this for P2P because otherwise we can *segfault* with things like: "runtime: unexpected return pc for runtime.handleEvent" where the event is a `syscall/js` event, caused by spamming sql.js caused by "Checking event signatures for 14 events of room state" which hammers the key DB repeatedly in quick succession. Using a cache fixes this, though the underlying cause is probably a bug in the version of Go I'm on (1.13.7) * breaking: Add Tracing.Enabled to toggle whether we do opentracing Defaults to false, which is why this is a breaking change. We need this flag because WASM builds cannot do opentracing. * Start adding conditional builds for wasm to handle lib/pq The general idea here is to have the wasm build have a `NewXXXDatabase` that doesn't import any postgres package and hence we never import `lib/pq`, which doesn't work under WASM (undefined `userCurrent`). * Remove lib/pq for wasm for syncapi * Add conditional building to remaining storage APIs * Update build script to set env vars correctly for dendritejs * sqlite bug fixes * Docs * Add a no-op main for dendritejs when not building under wasm * Use the real prometheus, even for WASM Instead, the dendrite-sw.js must mock out `process.pid` and `fs.stat` - which must invoke the callback with an error (e.g `EINVAL`) in order for it to work: ``` global.process = { pid: 1, }; global.fs.stat = function(path, cb) { cb({ code: "EINVAL", }); } ``` * Linting
2020-03-06 10:23:55 +00:00
addStateJSON, err := json.Marshal(addState)
if err != nil {
return 0, err
Add peer-to-peer support into Dendrite via libp2p and fetch (#880) * Use a fork of pq which supports userCurrent on wasm * Use sqlite3_js driver when running in JS * Add cmd/dendritejs to pull in sqlite3_js driver for wasm only * Update to latest go-sqlite-js version * Replace prometheus with a stub. sigh * Hard-code a config and don't use opentracing * Latest go-sqlite3-js version * Generate a key for now * Listen for fetch traffic rather than HTTP * Latest hacks for js * libp2p support * More libp2p * Fork gjson to allow us to enforce auth checks as before Previously, all events would come down redacted because the hash checks would fail. They would fail because sjson.DeleteBytes didn't remove keys not used for hashing. This didn't work because of a build tag which included a file which no-oped the index returned. See https://github.com/tidwall/gjson/issues/157 When it's resolved, let's go back to mainline. * Use gjson@1.6.0 as it fixes https://github.com/tidwall/gjson/issues/157 * Use latest gomatrixserverlib for sig checks * Fix a bug which could cause exclude_from_sync to not be set Caused when sending events over federation. * Use query variadic to make lookups actually work! * Latest gomatrixserverlib * Add notes on getting p2p up and running Partly so I don't forget myself! * refactor: Move p2p specific stuff to cmd/dendritejs This is important or else the normal build of dendrite will fail because the p2p libraries depend on syscall/js which doesn't work on normal builds. Also, clean up main.go to read a bit better. * Update ho-http-js-libp2p to return errors from RoundTrip * Add an LRU cache around the key DB We actually need this for P2P because otherwise we can *segfault* with things like: "runtime: unexpected return pc for runtime.handleEvent" where the event is a `syscall/js` event, caused by spamming sql.js caused by "Checking event signatures for 14 events of room state" which hammers the key DB repeatedly in quick succession. Using a cache fixes this, though the underlying cause is probably a bug in the version of Go I'm on (1.13.7) * breaking: Add Tracing.Enabled to toggle whether we do opentracing Defaults to false, which is why this is a breaking change. We need this flag because WASM builds cannot do opentracing. * Start adding conditional builds for wasm to handle lib/pq The general idea here is to have the wasm build have a `NewXXXDatabase` that doesn't import any postgres package and hence we never import `lib/pq`, which doesn't work under WASM (undefined `userCurrent`). * Remove lib/pq for wasm for syncapi * Add conditional building to remaining storage APIs * Update build script to set env vars correctly for dendritejs * sqlite bug fixes * Docs * Add a no-op main for dendritejs when not building under wasm * Use the real prometheus, even for WASM Instead, the dendrite-sw.js must mock out `process.pid` and `fs.stat` - which must invoke the callback with an error (e.g `EINVAL`) in order for it to work: ``` global.process = { pid: 1, }; global.fs.stat = function(path, cb) { cb({ code: "EINVAL", }); } ``` * Linting
2020-03-06 10:23:55 +00:00
}
removeStateJSON, err := json.Marshal(removeState)
if err != nil {
return 0, err
Add peer-to-peer support into Dendrite via libp2p and fetch (#880) * Use a fork of pq which supports userCurrent on wasm * Use sqlite3_js driver when running in JS * Add cmd/dendritejs to pull in sqlite3_js driver for wasm only * Update to latest go-sqlite-js version * Replace prometheus with a stub. sigh * Hard-code a config and don't use opentracing * Latest go-sqlite3-js version * Generate a key for now * Listen for fetch traffic rather than HTTP * Latest hacks for js * libp2p support * More libp2p * Fork gjson to allow us to enforce auth checks as before Previously, all events would come down redacted because the hash checks would fail. They would fail because sjson.DeleteBytes didn't remove keys not used for hashing. This didn't work because of a build tag which included a file which no-oped the index returned. See https://github.com/tidwall/gjson/issues/157 When it's resolved, let's go back to mainline. * Use gjson@1.6.0 as it fixes https://github.com/tidwall/gjson/issues/157 * Use latest gomatrixserverlib for sig checks * Fix a bug which could cause exclude_from_sync to not be set Caused when sending events over federation. * Use query variadic to make lookups actually work! * Latest gomatrixserverlib * Add notes on getting p2p up and running Partly so I don't forget myself! * refactor: Move p2p specific stuff to cmd/dendritejs This is important or else the normal build of dendrite will fail because the p2p libraries depend on syscall/js which doesn't work on normal builds. Also, clean up main.go to read a bit better. * Update ho-http-js-libp2p to return errors from RoundTrip * Add an LRU cache around the key DB We actually need this for P2P because otherwise we can *segfault* with things like: "runtime: unexpected return pc for runtime.handleEvent" where the event is a `syscall/js` event, caused by spamming sql.js caused by "Checking event signatures for 14 events of room state" which hammers the key DB repeatedly in quick succession. Using a cache fixes this, though the underlying cause is probably a bug in the version of Go I'm on (1.13.7) * breaking: Add Tracing.Enabled to toggle whether we do opentracing Defaults to false, which is why this is a breaking change. We need this flag because WASM builds cannot do opentracing. * Start adding conditional builds for wasm to handle lib/pq The general idea here is to have the wasm build have a `NewXXXDatabase` that doesn't import any postgres package and hence we never import `lib/pq`, which doesn't work under WASM (undefined `userCurrent`). * Remove lib/pq for wasm for syncapi * Add conditional building to remaining storage APIs * Update build script to set env vars correctly for dendritejs * sqlite bug fixes * Docs * Add a no-op main for dendritejs when not building under wasm * Use the real prometheus, even for WASM Instead, the dendrite-sw.js must mock out `process.pid` and `fs.stat` - which must invoke the callback with an error (e.g `EINVAL`) in order for it to work: ``` global.process = { pid: 1, }; global.fs.stat = function(path, cb) { cb({ code: "EINVAL", }); } ``` * Linting
2020-03-06 10:23:55 +00:00
}
streamPos, err := s.streamIDStatements.nextStreamID(ctx, txn)
if err != nil {
return 0, err
}
insertStmt := sqlutil.TxStmt(txn, s.insertEventStmt)
_, err = insertStmt.ExecContext(
ctx,
streamPos,
event.RoomID(),
event.EventID(),
headeredJSON,
event.Type(),
event.Sender(),
containsURL,
string(addStateJSON),
string(removeStateJSON),
sessionID,
txnID,
excludeFromSync,
excludeFromSync,
)
return streamPos, err
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
}
func (s *outputRoomEventsStatements) SelectRecentEvents(
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
ctx context.Context, txn *sql.Tx,
roomID string, r types.Range, limit int,
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
chronologicalOrder bool, onlySyncEvents bool,
) ([]types.StreamEvent, bool, error) {
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
var stmt *sql.Stmt
if onlySyncEvents {
stmt = sqlutil.TxStmt(txn, s.selectRecentEventsForSyncStmt)
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
} else {
stmt = sqlutil.TxStmt(txn, s.selectRecentEventsStmt)
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
}
rows, err := stmt.QueryContext(ctx, roomID, r.Low(), r.High(), limit+1)
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
if err != nil {
return nil, false, err
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
}
defer internal.CloseAndLogIfError(ctx, rows, "selectRecentEvents: rows.close() failed")
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
events, err := rowsToStreamEvents(rows)
if err != nil {
return nil, false, err
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
}
if chronologicalOrder {
// The events need to be returned from oldest to latest, which isn't
// necessary the way the SQL query returns them, so a sort is necessary to
// ensure the events are in the right order in the slice.
sort.SliceStable(events, func(i int, j int) bool {
return events[i].StreamPosition < events[j].StreamPosition
})
}
// we queried for 1 more than the limit, so if we returned one more mark limited=true
limited := false
if len(events) > limit {
limited = true
// re-slice the extra (oldest) event out: in chronological order this is the first entry, else the last.
if chronologicalOrder {
events = events[1:]
} else {
events = events[:len(events)-1]
}
}
return events, limited, nil
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
}
func (s *outputRoomEventsStatements) SelectEarlyEvents(
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
ctx context.Context, txn *sql.Tx,
roomID string, r types.Range, limit int,
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
) ([]types.StreamEvent, error) {
stmt := sqlutil.TxStmt(txn, s.selectEarlyEventsStmt)
rows, err := stmt.QueryContext(ctx, roomID, r.Low(), r.High(), limit)
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
if err != nil {
return nil, err
}
defer internal.CloseAndLogIfError(ctx, rows, "selectEarlyEvents: rows.close() failed")
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
events, err := rowsToStreamEvents(rows)
if err != nil {
return nil, err
}
// The events need to be returned from oldest to latest, which isn't
// necessarily the way the SQL query returns them, so a sort is necessary to
// ensure the events are in the right order in the slice.
sort.SliceStable(events, func(i int, j int) bool {
return events[i].StreamPosition < events[j].StreamPosition
})
return events, nil
}
// selectEvents returns the events for the given event IDs. If an event is
// missing from the database, it will be omitted.
func (s *outputRoomEventsStatements) SelectEvents(
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
ctx context.Context, txn *sql.Tx, eventIDs []string,
) ([]types.StreamEvent, error) {
var returnEvents []types.StreamEvent
stmt := sqlutil.TxStmt(txn, s.selectEventsStmt)
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
for _, eventID := range eventIDs {
rows, err := stmt.QueryContext(ctx, eventID)
if err != nil {
return nil, err
}
if streamEvents, err := rowsToStreamEvents(rows); err == nil {
returnEvents = append(returnEvents, streamEvents...)
}
internal.CloseAndLogIfError(ctx, rows, "selectEvents: rows.close() failed")
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
}
return returnEvents, nil
}
func (s *outputRoomEventsStatements) DeleteEventsForRoom(
ctx context.Context, txn *sql.Tx, roomID string,
) (err error) {
_, err = sqlutil.TxStmt(txn, s.deleteEventsForRoomStmt).ExecContext(ctx, roomID)
return err
}
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
func rowsToStreamEvents(rows *sql.Rows) ([]types.StreamEvent, error) {
var result []types.StreamEvent
for rows.Next() {
var (
streamPos types.StreamPosition
eventBytes []byte
excludeFromSync bool
sessionID *int64
txnID *string
transactionID *api.TransactionID
)
if err := rows.Scan(&streamPos, &eventBytes, &sessionID, &excludeFromSync, &txnID); err != nil {
return nil, err
}
// TODO: Handle redacted events
var ev gomatrixserverlib.HeaderedEvent
if err := json.Unmarshal(eventBytes, &ev); err != nil {
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
return nil, err
}
if sessionID != nil && txnID != nil {
transactionID = &api.TransactionID{
SessionID: *sessionID,
TransactionID: *txnID,
}
}
result = append(result, types.StreamEvent{
HeaderedEvent: ev,
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
StreamPosition: streamPos,
TransactionID: transactionID,
ExcludeFromSync: excludeFromSync,
})
}
return result, nil
}
Add peer-to-peer support into Dendrite via libp2p and fetch (#880) * Use a fork of pq which supports userCurrent on wasm * Use sqlite3_js driver when running in JS * Add cmd/dendritejs to pull in sqlite3_js driver for wasm only * Update to latest go-sqlite-js version * Replace prometheus with a stub. sigh * Hard-code a config and don't use opentracing * Latest go-sqlite3-js version * Generate a key for now * Listen for fetch traffic rather than HTTP * Latest hacks for js * libp2p support * More libp2p * Fork gjson to allow us to enforce auth checks as before Previously, all events would come down redacted because the hash checks would fail. They would fail because sjson.DeleteBytes didn't remove keys not used for hashing. This didn't work because of a build tag which included a file which no-oped the index returned. See https://github.com/tidwall/gjson/issues/157 When it's resolved, let's go back to mainline. * Use gjson@1.6.0 as it fixes https://github.com/tidwall/gjson/issues/157 * Use latest gomatrixserverlib for sig checks * Fix a bug which could cause exclude_from_sync to not be set Caused when sending events over federation. * Use query variadic to make lookups actually work! * Latest gomatrixserverlib * Add notes on getting p2p up and running Partly so I don't forget myself! * refactor: Move p2p specific stuff to cmd/dendritejs This is important or else the normal build of dendrite will fail because the p2p libraries depend on syscall/js which doesn't work on normal builds. Also, clean up main.go to read a bit better. * Update ho-http-js-libp2p to return errors from RoundTrip * Add an LRU cache around the key DB We actually need this for P2P because otherwise we can *segfault* with things like: "runtime: unexpected return pc for runtime.handleEvent" where the event is a `syscall/js` event, caused by spamming sql.js caused by "Checking event signatures for 14 events of room state" which hammers the key DB repeatedly in quick succession. Using a cache fixes this, though the underlying cause is probably a bug in the version of Go I'm on (1.13.7) * breaking: Add Tracing.Enabled to toggle whether we do opentracing Defaults to false, which is why this is a breaking change. We need this flag because WASM builds cannot do opentracing. * Start adding conditional builds for wasm to handle lib/pq The general idea here is to have the wasm build have a `NewXXXDatabase` that doesn't import any postgres package and hence we never import `lib/pq`, which doesn't work under WASM (undefined `userCurrent`). * Remove lib/pq for wasm for syncapi * Add conditional building to remaining storage APIs * Update build script to set env vars correctly for dendritejs * sqlite bug fixes * Docs * Add a no-op main for dendritejs when not building under wasm * Use the real prometheus, even for WASM Instead, the dendrite-sw.js must mock out `process.pid` and `fs.stat` - which must invoke the callback with an error (e.g `EINVAL`) in order for it to work: ``` global.process = { pid: 1, }; global.fs.stat = function(path, cb) { cb({ code: "EINVAL", }); } ``` * Linting
2020-03-06 10:23:55 +00:00
func unmarshalStateIDs(addIDsJSON, delIDsJSON string) (addIDs []string, delIDs []string, err error) {
if len(addIDsJSON) > 0 {
if err = json.Unmarshal([]byte(addIDsJSON), &addIDs); err != nil {
return
}
}
if len(delIDsJSON) > 0 {
if err = json.Unmarshal([]byte(delIDsJSON), &delIDs); err != nil {
return
}
}
return
}