dendrite/roomserver/storage/sqlite3/state_block_table.go

290 lines
10 KiB
Go
Raw Normal View History

Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
// Copyright 2017-2018 New Vector Ltd
// Copyright 2019-2020 The Matrix.org Foundation C.I.C.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
package sqlite3
import (
"context"
"database/sql"
"fmt"
"sort"
"strings"
"github.com/matrix-org/dendrite/internal"
"github.com/matrix-org/dendrite/internal/sqlutil"
"github.com/matrix-org/dendrite/roomserver/storage/shared"
"github.com/matrix-org/dendrite/roomserver/storage/tables"
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
"github.com/matrix-org/dendrite/roomserver/types"
"github.com/matrix-org/util"
)
const stateDataSchema = `
CREATE TABLE IF NOT EXISTS roomserver_state_block (
sqlite: fixes from sytest (#872) * bugfix: fix panic on new invite events from sytest I'm unsure why the previous code didn't work, but it's clearer, quicker and easier to read the `LastInsertID()` way. Previously, the code would panic as the SELECT would fail to find the last inserted row ID. * sqlite: Fix UNIQUE violations and close more cursors - Add missing `defer rows.Close()` - Do not have the state block NID as a PRIMARY KEY else it breaks for blocks with >1 state event in them. Instead, rejig the queries so we can still have monotonically increasing integers without using AUTOINCREMENT (which mandates PRIMARY KEY). * sqlite: Add missing variadic function * Use LastInsertId because empirically it works over the SELECT form (though I don't know why that is) * sqlite: Fix invite table by using the global stream pos rather than one specific to invites If we don't use the global, clients don't get notified about any invites because the position is too low. * linting: shadowing * sqlite: do not use last rowid, we already know the stream pos! * sqlite: Fix account data table in syncapi by commiting insert txns! * sqlite: Fix failing federation invite Was failing with 'database is locked' due to multiple write txns being taken out. * sqlite: Ensure we return exactly the number of events found in the database Previously we would return exactly the number of *requested* events, which meant that several zero-initialised events would bubble through the system, failing at JSON serialisation time. * sqlite: let's just ignore the problem for now.... * linting
2020-02-20 09:28:03 +00:00
state_block_nid INTEGER NOT NULL,
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
event_type_nid INTEGER NOT NULL,
event_state_key_nid INTEGER NOT NULL,
event_nid INTEGER NOT NULL,
UNIQUE (state_block_nid, event_type_nid, event_state_key_nid)
);
`
const insertStateDataSQL = "" +
"INSERT INTO roomserver_state_block (state_block_nid, event_type_nid, event_state_key_nid, event_nid)" +
" VALUES ($1, $2, $3, $4)"
const selectNextStateBlockNIDSQL = `
sqlite: fixes from sytest (#872) * bugfix: fix panic on new invite events from sytest I'm unsure why the previous code didn't work, but it's clearer, quicker and easier to read the `LastInsertID()` way. Previously, the code would panic as the SELECT would fail to find the last inserted row ID. * sqlite: Fix UNIQUE violations and close more cursors - Add missing `defer rows.Close()` - Do not have the state block NID as a PRIMARY KEY else it breaks for blocks with >1 state event in them. Instead, rejig the queries so we can still have monotonically increasing integers without using AUTOINCREMENT (which mandates PRIMARY KEY). * sqlite: Add missing variadic function * Use LastInsertId because empirically it works over the SELECT form (though I don't know why that is) * sqlite: Fix invite table by using the global stream pos rather than one specific to invites If we don't use the global, clients don't get notified about any invites because the position is too low. * linting: shadowing * sqlite: do not use last rowid, we already know the stream pos! * sqlite: Fix account data table in syncapi by commiting insert txns! * sqlite: Fix failing federation invite Was failing with 'database is locked' due to multiple write txns being taken out. * sqlite: Ensure we return exactly the number of events found in the database Previously we would return exactly the number of *requested* events, which meant that several zero-initialised events would bubble through the system, failing at JSON serialisation time. * sqlite: let's just ignore the problem for now.... * linting
2020-02-20 09:28:03 +00:00
SELECT IFNULL(MAX(state_block_nid), 0) + 1 FROM roomserver_state_block
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
`
// Bulk state lookup by numeric state block ID.
// Sort by the state_block_nid, event_type_nid, event_state_key_nid
// This means that all the entries for a given state_block_nid will appear
// together in the list and those entries will sorted by event_type_nid
// and event_state_key_nid. This property makes it easier to merge two
// state data blocks together.
const bulkSelectStateBlockEntriesSQL = "" +
"SELECT state_block_nid, event_type_nid, event_state_key_nid, event_nid" +
" FROM roomserver_state_block WHERE state_block_nid IN ($1)" +
" ORDER BY state_block_nid, event_type_nid, event_state_key_nid"
// Bulk state lookup by numeric state block ID.
// Filters the rows in each block to the requested types and state keys.
// We would like to restrict to particular type state key pairs but we are
// restricted by the query language to pull the cross product of a list
// of types and a list state_keys. So we have to filter the result in the
// application to restrict it to the list of event types and state keys we
// actually wanted.
const bulkSelectFilteredStateBlockEntriesSQL = "" +
"SELECT state_block_nid, event_type_nid, event_state_key_nid, event_nid" +
" FROM roomserver_state_block WHERE state_block_nid IN ($1)" +
" AND event_type_nid IN ($2) AND event_state_key_nid IN ($3)" +
" ORDER BY state_block_nid, event_type_nid, event_state_key_nid"
type stateBlockStatements struct {
db *sql.DB
insertStateDataStmt *sql.Stmt
selectNextStateBlockNIDStmt *sql.Stmt
bulkSelectStateBlockEntriesStmt *sql.Stmt
bulkSelectFilteredStateBlockEntriesStmt *sql.Stmt
}
func NewSqliteStateBlockTable(db *sql.DB) (tables.StateBlock, error) {
s := &stateBlockStatements{}
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
s.db = db
_, err := db.Exec(stateDataSchema)
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
if err != nil {
return nil, err
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
}
return s, shared.StatementList{
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
{&s.insertStateDataStmt, insertStateDataSQL},
{&s.selectNextStateBlockNIDStmt, selectNextStateBlockNIDSQL},
{&s.bulkSelectStateBlockEntriesStmt, bulkSelectStateBlockEntriesSQL},
{&s.bulkSelectFilteredStateBlockEntriesStmt, bulkSelectFilteredStateBlockEntriesSQL},
}.Prepare(db)
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
}
func (s *stateBlockStatements) BulkInsertStateData(
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
ctx context.Context, txn *sql.Tx,
entries []types.StateEntry,
sqlite: fixes from sytest (#872) * bugfix: fix panic on new invite events from sytest I'm unsure why the previous code didn't work, but it's clearer, quicker and easier to read the `LastInsertID()` way. Previously, the code would panic as the SELECT would fail to find the last inserted row ID. * sqlite: Fix UNIQUE violations and close more cursors - Add missing `defer rows.Close()` - Do not have the state block NID as a PRIMARY KEY else it breaks for blocks with >1 state event in them. Instead, rejig the queries so we can still have monotonically increasing integers without using AUTOINCREMENT (which mandates PRIMARY KEY). * sqlite: Add missing variadic function * Use LastInsertId because empirically it works over the SELECT form (though I don't know why that is) * sqlite: Fix invite table by using the global stream pos rather than one specific to invites If we don't use the global, clients don't get notified about any invites because the position is too low. * linting: shadowing * sqlite: do not use last rowid, we already know the stream pos! * sqlite: Fix account data table in syncapi by commiting insert txns! * sqlite: Fix failing federation invite Was failing with 'database is locked' due to multiple write txns being taken out. * sqlite: Ensure we return exactly the number of events found in the database Previously we would return exactly the number of *requested* events, which meant that several zero-initialised events would bubble through the system, failing at JSON serialisation time. * sqlite: let's just ignore the problem for now.... * linting
2020-02-20 09:28:03 +00:00
) (types.StateBlockNID, error) {
if len(entries) == 0 {
return 0, nil
}
var stateBlockNID types.StateBlockNID
err := txn.Stmt(s.selectNextStateBlockNIDStmt).QueryRowContext(ctx).Scan(&stateBlockNID)
if err != nil {
return 0, err
}
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
for _, entry := range entries {
sqlite: fixes from sytest (#872) * bugfix: fix panic on new invite events from sytest I'm unsure why the previous code didn't work, but it's clearer, quicker and easier to read the `LastInsertID()` way. Previously, the code would panic as the SELECT would fail to find the last inserted row ID. * sqlite: Fix UNIQUE violations and close more cursors - Add missing `defer rows.Close()` - Do not have the state block NID as a PRIMARY KEY else it breaks for blocks with >1 state event in them. Instead, rejig the queries so we can still have monotonically increasing integers without using AUTOINCREMENT (which mandates PRIMARY KEY). * sqlite: Add missing variadic function * Use LastInsertId because empirically it works over the SELECT form (though I don't know why that is) * sqlite: Fix invite table by using the global stream pos rather than one specific to invites If we don't use the global, clients don't get notified about any invites because the position is too low. * linting: shadowing * sqlite: do not use last rowid, we already know the stream pos! * sqlite: Fix account data table in syncapi by commiting insert txns! * sqlite: Fix failing federation invite Was failing with 'database is locked' due to multiple write txns being taken out. * sqlite: Ensure we return exactly the number of events found in the database Previously we would return exactly the number of *requested* events, which meant that several zero-initialised events would bubble through the system, failing at JSON serialisation time. * sqlite: let's just ignore the problem for now.... * linting
2020-02-20 09:28:03 +00:00
_, err := txn.Stmt(s.insertStateDataStmt).ExecContext(
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
ctx,
int64(stateBlockNID),
int64(entry.EventTypeNID),
int64(entry.EventStateKeyNID),
int64(entry.EventNID),
)
if err != nil {
sqlite: fixes from sytest (#872) * bugfix: fix panic on new invite events from sytest I'm unsure why the previous code didn't work, but it's clearer, quicker and easier to read the `LastInsertID()` way. Previously, the code would panic as the SELECT would fail to find the last inserted row ID. * sqlite: Fix UNIQUE violations and close more cursors - Add missing `defer rows.Close()` - Do not have the state block NID as a PRIMARY KEY else it breaks for blocks with >1 state event in them. Instead, rejig the queries so we can still have monotonically increasing integers without using AUTOINCREMENT (which mandates PRIMARY KEY). * sqlite: Add missing variadic function * Use LastInsertId because empirically it works over the SELECT form (though I don't know why that is) * sqlite: Fix invite table by using the global stream pos rather than one specific to invites If we don't use the global, clients don't get notified about any invites because the position is too low. * linting: shadowing * sqlite: do not use last rowid, we already know the stream pos! * sqlite: Fix account data table in syncapi by commiting insert txns! * sqlite: Fix failing federation invite Was failing with 'database is locked' due to multiple write txns being taken out. * sqlite: Ensure we return exactly the number of events found in the database Previously we would return exactly the number of *requested* events, which meant that several zero-initialised events would bubble through the system, failing at JSON serialisation time. * sqlite: let's just ignore the problem for now.... * linting
2020-02-20 09:28:03 +00:00
return 0, err
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
}
}
sqlite: fixes from sytest (#872) * bugfix: fix panic on new invite events from sytest I'm unsure why the previous code didn't work, but it's clearer, quicker and easier to read the `LastInsertID()` way. Previously, the code would panic as the SELECT would fail to find the last inserted row ID. * sqlite: Fix UNIQUE violations and close more cursors - Add missing `defer rows.Close()` - Do not have the state block NID as a PRIMARY KEY else it breaks for blocks with >1 state event in them. Instead, rejig the queries so we can still have monotonically increasing integers without using AUTOINCREMENT (which mandates PRIMARY KEY). * sqlite: Add missing variadic function * Use LastInsertId because empirically it works over the SELECT form (though I don't know why that is) * sqlite: Fix invite table by using the global stream pos rather than one specific to invites If we don't use the global, clients don't get notified about any invites because the position is too low. * linting: shadowing * sqlite: do not use last rowid, we already know the stream pos! * sqlite: Fix account data table in syncapi by commiting insert txns! * sqlite: Fix failing federation invite Was failing with 'database is locked' due to multiple write txns being taken out. * sqlite: Ensure we return exactly the number of events found in the database Previously we would return exactly the number of *requested* events, which meant that several zero-initialised events would bubble through the system, failing at JSON serialisation time. * sqlite: let's just ignore the problem for now.... * linting
2020-02-20 09:28:03 +00:00
return stateBlockNID, nil
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
}
func (s *stateBlockStatements) BulkSelectStateBlockEntries(
ctx context.Context, stateBlockNIDs []types.StateBlockNID,
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
) ([]types.StateEntryList, error) {
nids := make([]interface{}, len(stateBlockNIDs))
for k, v := range stateBlockNIDs {
nids[k] = v
}
selectOrig := strings.Replace(bulkSelectStateBlockEntriesSQL, "($1)", sqlutil.QueryVariadic(len(nids)), 1)
selectStmt, err := s.db.Prepare(selectOrig)
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
if err != nil {
return nil, err
}
rows, err := selectStmt.QueryContext(ctx, nids...)
if err != nil {
return nil, err
}
defer internal.CloseAndLogIfError(ctx, rows, "bulkSelectStateBlockEntries: rows.close() failed")
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
results := make([]types.StateEntryList, len(stateBlockNIDs))
// current is a pointer to the StateEntryList to append the state entries to.
var current *types.StateEntryList
i := 0
for rows.Next() {
var (
stateBlockNID int64
eventTypeNID int64
eventStateKeyNID int64
eventNID int64
entry types.StateEntry
)
if err := rows.Scan(
&stateBlockNID, &eventTypeNID, &eventStateKeyNID, &eventNID,
); err != nil {
return nil, err
}
entry.EventTypeNID = types.EventTypeNID(eventTypeNID)
entry.EventStateKeyNID = types.EventStateKeyNID(eventStateKeyNID)
entry.EventNID = types.EventNID(eventNID)
if current == nil || types.StateBlockNID(stateBlockNID) != current.StateBlockNID {
// The state entry row is for a different state data block to the current one.
// So we start appending to the next entry in the list.
current = &results[i]
current.StateBlockNID = types.StateBlockNID(stateBlockNID)
i++
}
current.StateEntries = append(current.StateEntries, entry)
}
if i != len(nids) {
return nil, fmt.Errorf("storage: state data NIDs missing from the database (%d != %d)", i, len(nids))
}
return results, nil
}
func (s *stateBlockStatements) BulkSelectFilteredStateBlockEntries(
ctx context.Context,
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
stateBlockNIDs []types.StateBlockNID,
stateKeyTuples []types.StateKeyTuple,
) ([]types.StateEntryList, error) {
tuples := stateKeyTupleSorter(stateKeyTuples)
// Sort the tuples so that we can run binary search against them as we filter the rows returned by the db.
sort.Sort(tuples)
eventTypeNIDArray, eventStateKeyNIDArray := tuples.typesAndStateKeysAsArrays()
sqlStatement := strings.Replace(bulkSelectFilteredStateBlockEntriesSQL, "($1)", sqlutil.QueryVariadic(len(stateBlockNIDs)), 1)
sqlStatement = strings.Replace(sqlStatement, "($2)", sqlutil.QueryVariadicOffset(len(eventTypeNIDArray), len(stateBlockNIDs)), 1)
sqlStatement = strings.Replace(sqlStatement, "($3)", sqlutil.QueryVariadicOffset(len(eventStateKeyNIDArray), len(stateBlockNIDs)+len(eventTypeNIDArray)), 1)
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
var params []interface{}
for _, val := range stateBlockNIDs {
params = append(params, int64(val))
}
for _, val := range eventTypeNIDArray {
params = append(params, val)
}
for _, val := range eventStateKeyNIDArray {
params = append(params, val)
}
rows, err := s.db.QueryContext(
ctx,
sqlStatement,
params...,
)
if err != nil {
return nil, err
}
defer internal.CloseAndLogIfError(ctx, rows, "bulkSelectFilteredStateBlockEntries: rows.close() failed")
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
var results []types.StateEntryList
var current types.StateEntryList
for rows.Next() {
var (
stateBlockNID int64
eventTypeNID int64
eventStateKeyNID int64
eventNID int64
entry types.StateEntry
)
if err := rows.Scan(
&stateBlockNID, &eventTypeNID, &eventStateKeyNID, &eventNID,
); err != nil {
return nil, err
}
entry.EventTypeNID = types.EventTypeNID(eventTypeNID)
entry.EventStateKeyNID = types.EventStateKeyNID(eventStateKeyNID)
entry.EventNID = types.EventNID(eventNID)
// We can use binary search here because we sorted the tuples earlier
if !tuples.contains(entry.StateKeyTuple) {
// The select will return the cross product of types and state keys.
// So we need to check if type of the entry is in the list.
continue
}
if types.StateBlockNID(stateBlockNID) != current.StateBlockNID {
// The state entry row is for a different state data block to the current one.
// So we append the current entry to the results and start adding to a new one.
// The first time through the loop current will be empty.
if current.StateEntries != nil {
results = append(results, current)
}
current = types.StateEntryList{StateBlockNID: types.StateBlockNID(stateBlockNID)}
}
current.StateEntries = append(current.StateEntries, entry)
}
// Add the last entry to the list if it is not empty.
if current.StateEntries != nil {
results = append(results, current)
}
return results, nil
}
type stateKeyTupleSorter []types.StateKeyTuple
func (s stateKeyTupleSorter) Len() int { return len(s) }
func (s stateKeyTupleSorter) Less(i, j int) bool { return s[i].LessThan(s[j]) }
func (s stateKeyTupleSorter) Swap(i, j int) { s[i], s[j] = s[j], s[i] }
// Check whether a tuple is in the list. Assumes that the list is sorted.
func (s stateKeyTupleSorter) contains(value types.StateKeyTuple) bool {
i := sort.Search(len(s), func(i int) bool { return !s[i].LessThan(value) })
return i < len(s) && s[i] == value
}
// List the unique eventTypeNIDs and eventStateKeyNIDs.
// Assumes that the list is sorted.
Add peer-to-peer support into Dendrite via libp2p and fetch (#880) * Use a fork of pq which supports userCurrent on wasm * Use sqlite3_js driver when running in JS * Add cmd/dendritejs to pull in sqlite3_js driver for wasm only * Update to latest go-sqlite-js version * Replace prometheus with a stub. sigh * Hard-code a config and don't use opentracing * Latest go-sqlite3-js version * Generate a key for now * Listen for fetch traffic rather than HTTP * Latest hacks for js * libp2p support * More libp2p * Fork gjson to allow us to enforce auth checks as before Previously, all events would come down redacted because the hash checks would fail. They would fail because sjson.DeleteBytes didn't remove keys not used for hashing. This didn't work because of a build tag which included a file which no-oped the index returned. See https://github.com/tidwall/gjson/issues/157 When it's resolved, let's go back to mainline. * Use gjson@1.6.0 as it fixes https://github.com/tidwall/gjson/issues/157 * Use latest gomatrixserverlib for sig checks * Fix a bug which could cause exclude_from_sync to not be set Caused when sending events over federation. * Use query variadic to make lookups actually work! * Latest gomatrixserverlib * Add notes on getting p2p up and running Partly so I don't forget myself! * refactor: Move p2p specific stuff to cmd/dendritejs This is important or else the normal build of dendrite will fail because the p2p libraries depend on syscall/js which doesn't work on normal builds. Also, clean up main.go to read a bit better. * Update ho-http-js-libp2p to return errors from RoundTrip * Add an LRU cache around the key DB We actually need this for P2P because otherwise we can *segfault* with things like: "runtime: unexpected return pc for runtime.handleEvent" where the event is a `syscall/js` event, caused by spamming sql.js caused by "Checking event signatures for 14 events of room state" which hammers the key DB repeatedly in quick succession. Using a cache fixes this, though the underlying cause is probably a bug in the version of Go I'm on (1.13.7) * breaking: Add Tracing.Enabled to toggle whether we do opentracing Defaults to false, which is why this is a breaking change. We need this flag because WASM builds cannot do opentracing. * Start adding conditional builds for wasm to handle lib/pq The general idea here is to have the wasm build have a `NewXXXDatabase` that doesn't import any postgres package and hence we never import `lib/pq`, which doesn't work under WASM (undefined `userCurrent`). * Remove lib/pq for wasm for syncapi * Add conditional building to remaining storage APIs * Update build script to set env vars correctly for dendritejs * sqlite bug fixes * Docs * Add a no-op main for dendritejs when not building under wasm * Use the real prometheus, even for WASM Instead, the dendrite-sw.js must mock out `process.pid` and `fs.stat` - which must invoke the callback with an error (e.g `EINVAL`) in order for it to work: ``` global.process = { pid: 1, }; global.fs.stat = function(path, cb) { cb({ code: "EINVAL", }); } ``` * Linting
2020-03-06 10:23:55 +00:00
func (s stateKeyTupleSorter) typesAndStateKeysAsArrays() (eventTypeNIDs []int64, eventStateKeyNIDs []int64) {
eventTypeNIDs = make([]int64, len(s))
eventStateKeyNIDs = make([]int64, len(s))
Support sqlite in addition to postgres (#869) * Move current work into single branch * Initial massaging of clientapi etc (not working yet) * Interfaces for accounts/devices databases * Duplicate postgres package for sqlite3 (no changes made to it yet) * Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking * Fix accounts DB, device DB * Update naffka dependency for SQLite * Naffka SQLite * Update naffka to latest master * SQLite support for federationsender * Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported) * Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite) * Implement GET endpoints for account_data in clientapi * Nuke filtering for now... * Revert "Implement GET endpoints for account_data in clientapi" This reverts commit 4d80dff4583d278620d9b3ed437e9fcd8d4674ee. * Implement GET endpoints for account_data in clientapi (#861) * Implement GET endpoints for account_data in clientapi * Fix accountDB parameter * Remove fmt.Println * Fix insertAccountData SQLite query * Fix accountDB storage interfaces * Add empty push rules into account data on account creation (#862) * Put SaveAccountData into the right function this time * Not sure if roomserver is better or worse now * sqlite work * Allow empty last sent ID for the first event * sqlite: room creation works * Support sending messages * Nuke fmt.println * Move QueryVariadic etc into common, other device fixes * Fix some linter issues * Fix bugs * Fix some linting errors * Fix errcheck lint errors * Make naffka use postgres as fallback, fix couple of compile errors * What on earth happened to the /rooms/{roomID}/send/{eventType} routing Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-02-13 17:27:33 +00:00
for i := range s {
eventTypeNIDs[i] = int64(s[i].EventTypeNID)
eventStateKeyNIDs[i] = int64(s[i].EventStateKeyNID)
}
eventTypeNIDs = eventTypeNIDs[:util.SortAndUnique(int64Sorter(eventTypeNIDs))]
eventStateKeyNIDs = eventStateKeyNIDs[:util.SortAndUnique(int64Sorter(eventStateKeyNIDs))]
return
}
type int64Sorter []int64
func (s int64Sorter) Len() int { return len(s) }
func (s int64Sorter) Less(i, j int) bool { return s[i] < s[j] }
func (s int64Sorter) Swap(i, j int) { s[i], s[j] = s[j], s[i] }